OKI C7350DTN User Manual
Have a look at the manual OKI C7350DTN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 103 Oki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
C7350/7550 User’s Guide: Windows Me/98/95 Operation • 381 5.Click the New button. C93_Me_PS_Overlay2.bmp 6.In the Overlay Name list, enter the file name of the overlay. Select the pages where you want the overlay to print. NOTE The Overlay Name must be EXACTLY the same as the file name you noted in the previous section. This is the name under which the file is stored on the printers’ hard disk drive. It is case sensitive. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows Me/98/95 Operation • 382 7.Under Form setting, in the drop-down list, enter or select a form name. Click Add. C93_Me_PS_Overlay3.bmp 8.Click OK. 9.To continue to add files to the overlay (if required), repeat steps 5 through 8. NOTE The Form Name is a random name of your selection. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows Me/98/95 Operation • 383 10.Under Defined Overlay, highlight the overlay name(s). Click Add to add the overlay(s) to the list under Active Overlay. To select more than one overlay, hold the CTRL key while clicking on each name. C93_Me_PS_Overlay4.bmp 11.At the top of the dialog box, use the drop-down list to select Use Overlay. Click OK. 12.Click OK to close the Properties dialog box. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows Me/98/95 Operation • 384 Defining Overlays PCL 1.Click Start → Settings → Printers. 2.Highlight the printer name. Click File. Click Properties.. 3.Click the Job Options tab. 4.Click the Overlay... button. pcl job options overlay.bmp Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows Me/98/95 Operation • 385 5.To define an overlay, click the Define Overlays button. C73_Me_PCL_Overlay1.bmp 6.In the Overlay Name list, enter the file name of the overlay 7.In ID Values, enter the ID of the file. Please refer to the instructions for the Storage Device Manager utility. 8.Select which pages the overlay is to be printed on from Print on Pages or use Custom Pages to select specific page numbers in the document. Click Add. 9.Click Close. 10.Under Defined Overlay, highlight the overlay name. Click the Add button to add the overlay to the list in Active Overlays. NOTE The Overlay Name must be EXACTLY the same as the file name you noted in the previous section. This is the name under which the file is stored on the printer’s hard disk drive. It is case sensitive. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows Me/98/95 Operation • 386 11.Select Print Using Active Overlays. C73_Me_PCL_Overlay2.bmp 12.Click OK. 13.Click OK to Close the Properties dialog box. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows Me/98/95 Operation • 387 Printing Posters PCL Only This option allows you to configure and print posters by breaking up the document page into multiple pieces. Each piece prints, enlarged, on a separate sheet. Then, the separate sheets are combined to produce a poster. It is only available with the PCL printer driver. 1.Open the file in your application. Select File → Print. 2.In the Print dialog box, click the appropriate PCL driver. 3.Click Properties (or Setup, or your application’s equivalent). 4.Click the Setup tab. Under Finishing Mode, select Poster Print. C73_Me_PCL_Posterk.tif Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows Me/98/95 Operation • 388 5.Click Options... and enter the configuration details. C93_Me_PCL_Poster2.bmp 6.Click OK twice. 7.Click OK. Print the document. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows NT Printer Drivers • 389 Windows NT Printer Drivers See your printed Software Installation Guide for information on installing printer drivers. You can also go to http://my.okidata.com to view and/or download a copy of the Software Installation Guide or for the latest information on drivers for your printer. Which Printer Driver to Use? Your printer comes with Windows drivers for PCL and Adobe® PostScript® (PS). You can install either of these, or both if you wish. Which driver you choose depends on your application. •If you use TrueType fonts and you do not print PostScript (including “.eps” files) graphics, choose the PCL driver. This is more efficient and give good results. •If you use PostScript fonts or print PostScript graphics, choose the PostScript driver. In this situation, performance is faster and graphics are printed at their best quality. If neither driver seems to cover all your needs, you should install both drivers. Select the same printer port (LPT1 or Network Port) for both drivers during the installation. Set the driver you plan to use most of the time to be your Windows default driver. Most applications allow you to choose a different printer from within the print dialog, so you can use the alternative driver for printing whenever you need to. NOTE The line art graphics in this manual are PostScript. If you plan to print parts of this manual, choose the PostScript driver. Otherwise, the line art graphics print at low resolution. The print quality may not be satisfactory. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows NT Printer Drivers • 390 Memory: Enabling PostScript Only Certain options such as additional memory, the duplexer, or additional trays may be installed in your printer. Before using the printer, you must enter the printer driver(s) and enable the options. You only need to do this once. If you have additional memory in your printer, use these instructions to update the Windows PostScript driver so that it recognizes the additional memory: 1.Click Start → Settings → Printers. 2.Highlight the printer name. Click File then Properties. 3.Click the Device Settings tab. 4.Under Installable Options, click Memory Configuration. 5.Set the memory in the Change ‘Memory Configuration’ Setting list to match what is now installed in the printer, as shown in the Menu Map. To print the Menu Map, see “Printer Settings (Menu Settings)” on page 70. 6.Click OK. Close the Printers dialog box. C73_NT_PS_Memoryk.tif Downloaded From ManualsPrinter.com Manuals