OKI C7350DTN User Manual
Have a look at the manual OKI C7350DTN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 103 Oki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 42
C7350/7550 User’s Guide: Setting Up • 42
Printing Paths
Face Down
For face down printing, make sure the rear paper exit is closed.
The paper exits from the top of the printer.
– Paper is stacked in printed order
– Paper tray capacity is about 500 sheets, depending on paper
weight.
CAUTION!
Don’t open or close the rear paper exit while printing, as
it may result in a paper jam.
Always use the face up (rear) stacker [straight through
exit path] for thick paper (card stock etc.).
Downloaded...](http://img.usermanuals.tech/thumb/3560/37580/w64_OKI_C7350DTN-41.png "Page 42
C7350/7550 User’s Guide: Setting Up • 42
Printing Paths
Face Down
For face down printing, make sure the rear paper exit is closed.
The paper exits from the top of the printer.
– Paper is stacked in printed order
– Paper tray capacity is about 500 sheets, depending on paper
weight.
CAUTION!
Don’t open or close the rear paper exit while printing, as
it may result in a paper jam.
Always use the face up (rear) stacker [straight through
exit path] for thick paper (card stock etc.).
Downloaded...")
C7350/7550 User’s Guide: Setting Up • 41 Printing Paths Face Up / Straight Through For face up printing (straight-through path), make sure the straight through paper exit is open and the paper support is extended. The paper exits from the side of the printer. – Paper is stacked in reverse order. – Tray capacity is about 100 sheets, depending on paper weight. rear exit openk.eps CAUTION! Don’t open or close the rear paper exit while printing, as it may result in a paper jam. Always use the face up (rear) stacker [straight through exit path] for thick paper (card stock etc.). Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Setting Up • 42 Printing Paths Face Down For face down printing, make sure the rear paper exit is closed. The paper exits from the top of the printer. – Paper is stacked in printed order – Paper tray capacity is about 500 sheets, depending on paper weight. CAUTION! Don’t open or close the rear paper exit while printing, as it may result in a paper jam. Always use the face up (rear) stacker [straight through exit path] for thick paper (card stock etc.). Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Setting Up • 43 Printing Paths Manual Feed 1.Open the Multi-purpose (MP) tray. Extend the paper feed guides. multi purpose tray loadingk.eps 2.Load the paper. –Load the media face up. – Adjust the paper guides to the size of the media being used. – Don’t exceed the Paper Full line (about 100 sheets depending on paper weight). – Load envelopes or letterhead stationery as shown. letterhead manual feedk.eps CAUTION! Don’t open or close the rear paper exit while printing, as it may result in a paper jam. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Setting Up • 44 Power Connecting the power cable 1.Connect the power cable (1) to the printer. 2.Connect the cable to a grounded power supply outlet. power connectionk.eps 3.Use the on/off switch (2) and turn ON the printer. 4.The printer goes through its initialization and warm up sequence. When the printer is ready to print, the READY indicator comes on and stays on (green). ONLINE appears on the display. WARNING! Make sure the printer is turned OFF before connecting the power cable. 1 2 Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Setting Up • 45 Power POWER SAVE Mode Use Power Save to avoid turning off the printer. If you MUST turn off the printer, you must perform a shutdown sequence. See “Hard Disk Drive installed” on page 48. Power Save is turned on or off through the Maintenance Menu. You can choose the length of time the printer “waits” before entering Power Save. This is done through the setting “Power Save Delay Time” in the System Configuration menu. Turn the feature on or off 1.Press ONLINE. OFFLINE displays. 2.Press MENU repeatedly until MAINTENANCE MENU displays. 3.Press SELECT. 4.Press ITEM (either + or -) until POWER SAVE displays. 5.Press VALUE (either + or -) until the desired status displays. ENABLE: Power Save is activated (turned on). DISABLE: Power Save is deactivated (turned off). 6.Press SELECT. An asterisk (*) appears next to the selected status. 7.When you are finished, press ONLINE. ONLINE displays. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Setting Up • 46 Power POWER SAVE Mode Set the “Wait” interval 1.Make sure Power Save is activated. See the previous procedure. 2.Press MENU until SYSTEM CONFIG MENU displays. 3.Press SELECT. 4.Press ITEM (either + or -) until POWER SAVE DELAY TIME displays. 5.Press VALUE (either + or -) until the desired time displays. 6.Press SELECT. An asterisk (*) appears next to the selected time. 7.When you are finished, press ONLINE. ONLINE displays. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Setting Up • 47 Power Turn Off the Printer Hard Disk Drive not installed Shutdown Sequence 1.Use the on/off switch (2) and turn OFF the printer. power connectionk.eps CAUTION! • NEVER turn the printer off while it is printing. • After turning the printer off, wait at least 10 seconds before turning it on again. This allows the internal power levels to drop. Turning on too soon could cause the printer to malfunction. 1 2 Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Setting Up • 48 Power Turn Off the Printer Hard Disk Drive installed Shutdown Sequence Use Power Save to avoid turning off the printer. Refer to “POWER SAVE Mode” on page 45. If you MUST turn off the printer: 1.Press MENU until SHUTDOWN MENU displays 2.Press SELECT. 3.Press SELECT again to begin the shutdown sequence. 4.When PLEASE POWER OFF SHUTDOWN COMPLETED displays, use the on/off switch to turn off the printer. Wait at least 10 seconds before turning it on again. This allows the internal power levels to drop. Turning on too soon could cause the printer to malfunction. CAUTION! • NEVER turn the printer off while it is printing. • If the optional hard disk has been installed, the following procedure MUST BE FOLLOWED before turning off the printer. This protects any data that is stored on the hard disk. • Follow this procedure every time the printer is turned off for any reason. • After turning the printer off, wait at least 10 seconds before turning it on again. This allows the internal power levels to drop. Turning on too soon could cause the printer to malfunction. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Setting Up • 49 Interfaces Location Diagram connect2k.bmp, 1fk.tif, 2f.tif, 3f.tif Your printer has three interfaces. 1.Parallel 2.USB 3.Network Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Setting Up • 50 Interfaces Parallel For direct connection to a PC. This port requires a bi-directional (IEEE 1384 compliant) parallel cable. USB For connection to a PC running Windows 98 or above (not Windows 95 upgraded to Windows 98) or Macintosh. This port requires a cable conforming to USB version 1.1 or above. •The printer may not operate properly if a USB compatible device is connected at the same time as other USB-compatible machines. •When connecting multiple printers of the same type, they appear as *****, ***** (2), ***** (3), etc. These numbers depend on the order of connecting or turning on each printer. Network For network cable connection. See your printed Software Installation Guide for information on: •Making the interface connections •Installing the printer drivers •Installing network software. You can also go to http://my.okidata.com to see/download a copy of the Software Installation Guide or for the latest information on your printer. NOTE Administrator’s authority is required when installing a network connection. Downloaded From ManualsPrinter.com Manuals