OKI C7350DTN User Manual
Have a look at the manual OKI C7350DTN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 103 Oki manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
C7350/7550 User’s Guide: Windows XP Operation • 201 11.Select Print Using Active Overlays. C93_XP_PCL_Overlay3.bmp 12.Click OK. 13.Click OK to close the Printing Preferences dialog box. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows XP Operation • 202 Printing Posters PCL Only This option allows you to configure and print posters by breaking up the document page into multiple pieces. Each piece prints, enlarged, on a separate sheet. Then, the separate sheets are combined to produce a poster. It is only available with the PCL printer driver. 1.Open the file in your application. Select File → Print. 2.In the Print dialog box, on the General tab, click the appropriate PCL driver. Click the Preferences button. 3.On the Setup tab, under Finishing Mode, select Poster Print. C73_XP_PCL_Posterk.tif Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows XP Operation • 203 4.Click Options... and enter the configuration details. C93_XP_PCL_Poster2.bmp 5.Click OK twice. 6.Click Print. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows 2000 Printer Drivers • 204 Windows 2000 Printer Drivers See your printed Software Installation Guide for information on installing printer drivers. You can also go to http://my.okidata.com to view and/or download a copy of the Software Installation Guide or for the latest information on drivers for your printer. Which Printer Driver to Use? Your printer comes with Windows drivers for PCL and Adobe® PostScript® (PS). You can install either of these, or both if you wish. Which driver you choose depends on your application. •If you use TrueType fonts and you do not print PostScript (including “.eps” files) graphics, choose the PCL driver. This is more efficient and gives good results. •If you use PostScript fonts or print PostScript graphics, choose the PostScript driver. In this situation, performance is faster and graphics print at their best quality. If neither driver seems to cover all your needs, you should install both drivers. Select the same printer port (LPT1 or Network Port) for both drivers during the installation. Set the driver you plan to use most of the time to be your Windows default driver. Most applications allow you to choose a different printer from within the print dialog, so you can use the alternative driver for printing whenever you need to. NOTE The line art graphics in this manual are PostScript. If you plan to print parts of this manual, choose the PostScript driver. Otherwise, the line art graphics print at low resolution. The print quality may not be satisfactory. Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows 2000 Printer Drivers • 205 Memory: Enabling PostScript Only Certain options such as additional memory, the duplexer, or additional trays may be installed in your printer. Before using the printer, you must enter the printer driver(s) and enable the options. You only need to do this once. If you have additional memory in your printer, use these instructions to update the Windows PostScript driver so that it recognizes the additional memory: 1.Click Start → Settings → Printers. 2.Highlight the printer name. Click File. Click Properties. 3.Click the Device Settings tab. 4.Under Installable Options, click Memory Configuration, then set the memory in the drop-down list to be the same as that now installed in the printer, as shown in the Menu Map. To print the Menu Map, see “Printer Settings (Menu Settings)” on page 70. 5.Click OK. Close the Printers dialog box. C73_2k_PS_MemoryK.tif Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows 2000 Printer Drivers • 206 Hard Disk Drive: Enabling PostScript Certain options such as additional memory, the duplexer, or additional trays may be installed in your printer. Before using the printer, you must enter the printer driver(s) and enable the options. You only need to do this once. 1.Click Start → Settings → Printers. 2.Highlight the printer name. Click File. Click Properties. 3.Click the Device Settings tab. 4.Under Installable Options, make sure Hard Disk is set to Installed. 5.Click OK. Close the Printers dialog box. C73_2k_PS_HDDK.tif Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows 2000 Printer Drivers • 207 Hard Disk Drive: Enabling PCL Certain options such as additional memory, the duplexer, or additional trays may be installed in your printer. Before using the printer, you must enter the printer driver(s) and enable the options. You only need to do this once. 1.Click Start → Settings → Printers. 2.Highlight the printer name. Click File. Click Properties. 3.On the Device Option tab, click Printer Hard Disk. 4.Click OK. Close the Printers dialog box. C73_2k_PCL_HDDK.tif Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows 2000 Printer Drivers • 208 Paper Trays: Enabling PostScript Certain options such as additional memory, the duplexer, or additional trays may be installed in your printer. Before using the printer, you must enter the printer driver(s) and enable the options. You only need to do this once. 1.Click Start → Settings → Printers. 2.Highlight the printer name. Click File. Click Properties. 3.Click the Device Settings tab. Under Installable Options, click Available Trays, then select the appropriate number of trays (not including the Multi-purpose tray) in the drop-down list. 4.Click OK. Close the Printers dialog box. C73_2k_PS_TraysK.tif Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows 2000 Printer Drivers • 209 Additional Paper Trays: Enabling PCL Certain options such as additional memory, the duplexer, or additional trays may be installed in your printer. Before using the printer, you must enter the printer driver(s) and enable the options. You only need to do this once. 1.Click Start → Settings → Printers. 2.Highlight the printer name. Click File. Click Properties. 3.On the Device Option tab, select the appropriate number of trays (not including the Multi-purpose tray). 4.Click OK. Close the Printers dialog box. C73_2k_PCL_TraysK.tif Downloaded From ManualsPrinter.com Manuals
C7350/7550 User’s Guide: Windows 2000 Printer Drivers • 210 Duplex Unit: Enabling PostScript Certain options such as additional memory, the duplexer, or additional trays may be installed in your printer. Before using the printer, you must enter the printer driver(s) and enable the options. You only need to do this once. 1.Click Start → Settings → Printers. 2.Highlight the printer name. Click File. Click Properties. 3.Click the Device Settings tab. Under Installable Options, click Duplex. In the drop-down list, select Installed. 4.Click OK. Close the Printers dialog box. C73_2k_PS_Duplex1K.tif Downloaded From ManualsPrinter.com Manuals