Home > NEC > Communications System > NEC Infoset 408 System Manual

NEC Infoset 408 System Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual NEC Infoset 408 System Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1168 NEC manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 394
    Add page 251 to Favourites
    image text
    Enable zoom 
    							InfoSet 408Issue 1A
System Manual3 - 171
Two-Color LEDs (Lamp)
The system provides two-color (red and green) LEDs to provide various status
indications of the telephone.  Hold and call waiting are a couple of examples of status
indications.
This feature is available for InfoSet and Electra Elite multiline telephones.
Feature Operation 
Special Conditions

The line keys on all multiline telephones can light both red and green.
The LED lights green for the following feature and red for all other features:
• Call Transfer
• Hold with Recall (Exclusive and Non-Exclusive)
• I-Hold Indication
• I-Use Indication
Not applicable.
    Add page 252 to Favourites
    image text
    Enable zoom 
    							Issue 1AInfoSet 408
3 - 172Features
User Programming
Users are allowed to program the following features using their InfoSet and Electra
Elite multiline telephones and single line telephones.  
 Ancillary Device Connection
 Attendant Positions
 Call Forward - All Calls
 Call Forward – Busy/No Answer
 Clock/Calendar Display
 Character Registration
 Distinctive Ringing
 Extension Name Assignment
 Incoming Call Identification
 Nesting Dial
 Off-Hook Ringing
 One-Touch/Feature Access Keys – User Programmable
 Programmable Pause for Speed Dial
 Speed Dial – Extension
 Speed Dial – System
 Stored Hookflash
 Timed Alarm
Special Conditions

Feature programming must be done while the system is idle.
    Add page 253 to Favourites
    image text
    Enable zoom 
    							System Manual4 - 1
Telephones 
SECTION  1  INTRODUCTION
The InfoSet 408 system is capable of supporting two telephone types.  This allows
flexibility for individual customers. 
InfoSet 408 Telephones
Electra Elite Telephones
1.1 InfoSet 408 Telephones
The following InfoSet 408 telephones can be used with the InfoSet 408
system:
16-line telephone without display [DTB-16-1 (BK)/(WH) TEL]
16-line telephone with display [DTB-16D-1 (BK)/(WH) TEL]
      
Figure 4-1   InfoSet 408 Telephones
DTB-16-1 (BK)/(WH) TEL
16-Line Non-DisplayDTB-16D-1 (BK)/(WH) TEL
16-Line Display
    Add page 254 to Favourites
    image text
    Enable zoom 
    							Issue 1AInfoSet 408
4 - 2Telephones
1.2 Electra Elite Telephones
The following Electra Elite telephones can be used with the InfoSet 408
system:
2-line telephone without display [DTP-2DT-1 (WH) TEL
8-line telephone without display [DTU-8-1 (BK)/(WH) TEL]
8-line telephone with display [DTU-8D-2 (BK)/(WH) TEL]
16-line telephone without display [DTU-16-1 (BK)/(WH) TEL]
16-line telephone with display [DTU-16D-2 (BK)/(WH) TEL]
32-line telephone without display and 16 programmable One-Touch
keys [DTU-32-1 (BK)/(WH) TEL]
32-line telephone with display and 16 programmable One-Touch
keys [DTU-32D-2 (BK)/(WH) TEL]
Single line telephone with flash key, redial key, 3-level receive
volume control, 2-level ring volume control, data jack and message
waiting lamp [DTP-1-1 (WH) TEL]
Single line telephone with flash key, redial key, 3-level receive
volume control, data jack, message waiting lamp and one-touch/
feature access keys for speed dialing [DTP-1HM-1 (WH) TEL]
    Add page 255 to Favourites
    image text
    Enable zoom 
    							InfoSet 408Issue 1A
System Manual4 - 3
Figure 4-2   Electra Elite Telephones 
DTP-2DT-1 (WH) TEL
2-Line Non-DisplayDTU-8-1 (BK)/(WH) TEL
8-Line Non-Display
DTU-8D-2 (BK)/(WH) TEL
8-Line Display
DTU-16-1 (BK)/(WH) TEL
16-Line Non-Display
    Add page 256 to Favourites
    image text
    Enable zoom 
    							Issue 1AInfoSet 408
4 - 4Telephones
Figure 4-2   Electra Elite Telephones  (Continued)
DTU-16D-2 (BK)/(WH) TEL
16-Line DisplayDTU-32-1 (BK)/(WH) TEL
16-Line Non-Display with 16 
Programmable One-Touch Keys
DTU-32D-2 (BK)/(WH) TEL
16-Line Display with 16 Programmable
 One-Touch Keys
    Add page 257 to Favourites
    image text
    Enable zoom 
    							InfoSet 408Issue 1A
System Manual4 - 5
   
Figure 4-3   Single Line Telephones
DTP-1-1 (WH) TEL
DTP-1HM-1 (WH) TEL
    Add page 258 to Favourites
    image text
    Enable zoom 
    							Issue 1AInfoSet 408
4 - 6Telephones
SECTION 2WALL MOUNTING TELEPHONES
Two types of telephones are available with the InfoSet system; the InfoSet
telephones and the Electra Elite telephones.  This section provides instructions for
installing both types of telephones.
2.1 Wall Mounting the InfoSet Telephones
The DTB-16-1 (BK)/(WH) TEL and DTB-16-1 (BK)/(WH) TEL can be
mounted to a wall.  
1. Locate the stoppers under the height adjustment stand on the bottom
of the telephone.  You will need to lift the adjustment stand to expose
the foot stand holding the stoppers.  Remove the two plastic
stoppers from the foot stand by firmly pushing on them.       
Figure 4-4   Removing the Stoppers from the Adjustment Stand
Plastic Stopper
Lift the telephone stand to 
expose the foot stand
Foot 
Stand
Push
Push
    Add page 259 to Favourites
    image text
    Enable zoom 
    							InfoSet 408Issue 1A
System Manual4 - 7 2. Remove the hanger (located on the bottom of the telephone).  Insert
the hanger into the holes as indicated in the diagram.    
3. Use the wall mounting template to mark the screw positions on the
wall.  The template is provided in Section 5 Wall Mounting Template
for InfoSet Telephones on page 4-33.  
4. Insert one end of the telephone line cord into the RJ-11 jack.  Route
the cord inside the height adjustment stand as indicated in the
diagram.  The cord can be wrapped more than once inside the height
adjustment stand to shorten the length of cord.  The cord can exit
either the top of the telephone or the side, depending on the most
convenient location of the RJ-11 wall jack. 
Figure 4-5   Attaching the Hanger to the Cradle of the InfoSet Telephone
PushHanger
Remove hanger from 
bottom of telephone
Insert hanger 
into holes
    Add page 260 to Favourites
    image text
    Enable zoom 
    							Issue 1AInfoSet 408
4 - 8Telephones     
5. Using a Phillips head screwdriver, insert the flat head wood screw
(provided) into the stopper and fasten to the wall.    
Figure 4-6   Routing the Telephone Cord Inside the Adjustment Stand
Figure 4-7   Fastening the Stoppers to the Wall
3.29”
(83.5 mm)Plastic 
Stopper
Wa ll
Wood Screw
    All NEC manuals Comments (0)

    Related Manuals for NEC Infoset 408 System Manual