Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual
Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual
Have a look at the manual Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
73 Brazil
Multifrequency-Signaling-Related System
Parameters
Page 6 of 6
FEATURE-RELATED SYSTEM PARAMETERS
Pull Transfer: n Update Transferred Ring Pattern? n
Outpulse Without Tone? n Wait Answer Supervision Timer? n
Repetitive Call Waiting Tone? n
Allow Conference via Flash? y
Vector Disconnect Timer (min): Network Feedback During Tone Detection? y
Hear Zip Tone Following VOA? n
Intercept Treatment On Failed Trunk Transfers? n
Station Tone Forward Disconnect: busy
Level Of Tone Detection: precise
RECALL TIMING
Flashhook Interval? y Upper Bound (msec): 1000
Lower Bound (msec): 200
ENHANCED DCS
Enhanced DCS Enabled? n
Apply Intercept Locally? y Enforce PNT-to-PNT Restrictions? n
Page 1 of 3
MULTIFREQUENCY-SIGNALING-RELATED SYSTEM PARAMETERS
Incoming Call Type: group-ii-mfc
Outgoing Call Type: group-ii-mfc
Maintenance Call Type: none
Test Call Extension:
Interdigit Timer (sec): 7
Outgoing Forward Signal Present Timer (sec): 20
Outgoing Forward Signal Absent Timer (sec): 30
Multifrequency Signaling Incoming Intercept Treatment? n
Received Signal Gain(-Loss) (dB): 0
Transmitted Signal Gain(-Loss) (dB): -3
ANI Prefix:
ANI for PBX:
Next ANI Digit: send-ani
ANI Prefix: Collect All Digits Before Seizure? n
Request Incoming ANI (non-AAR/ARS)? n
Called Party Category: user-type
Use COR for Calling Party Category? n
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
74 Brazil
Page 2 of 3
MULTIFREQUENCY-SIGNALING-RELATED SYSTEM PARAMETERS
INCOMING FORWARD SIGNAL TYPES INCOMING BACKWARD SIGNAL TYPES
(Tones from CO) (Tones to CO)
Group-I Group-II Group-A Group-B
11: ignored 1: normal 1: next-digit 1: free
12: ani-not-avail 2: normal 3: end-of-dial 2: busy
13: ignored 3: normal 4: congestion 4: congestion
14: ignored 4: normal 5: send-ani 7: intercept
15: and-of-ani 5: attendant
6: data-call
7: normal
8: send-intercept
9: normal
10: normal
11: normal
12: normal
13: normal
14: normal
15: normal
Page 3 of 3
MULTIFREQUENCY-SIGNALING-RELATED SYSTEM PARAMETERS
OUTGOING FORWARD SIGNAL TYPES OUTGOING BACKWARD SIGNAL TYPES
(Tones to CO) (Tones from CO)
Group-I Group-II Group-A Group-B
12: ani-not-avail 2: normal 1: next-digit 1: free
15: end-of-ani 1: attendant 2: restart 2: busy
6: data-call 3: end-of-dial 3: congestion
4: congestion 4: congestion
5: send-ani 5: free
6: congestion 6: free
7: last-2-digits 7: intercept
8: last-3-digits 8: congestion
9: last digit 9: congestion
10: congestion 10: congestion
11: congestion 11: congestion
12: congestion 12: congestion
13: congestion 13: congestion
14: congestion 14: congestion
15: congestion 15: congestion
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
75 Brazil
System Parameters Country-Options
In Analog Line Transmission field, set to 23
for 900 ohms or set to 16
for 600
ohms.
Page 1 of 7
SYSTEM PARAMETERS COUNTRY-OPTIONS
Companding Mode: Mu-Law Base Tone Generator Set: 1
440Hz PBX-dial Tone? n 440Hz Secondary-dial Tone? n
Digital Loss Plan: 1 Version of Digital Loss Plan: _
Analog Ringing Cadence: 3 Set Layer 1 timer T1 to 30 seconds? n
Analog Line Transmission: _
64/84xx Display Character Set: Roman
TONE DETECTION PARAMETERS
Tone Detection Mode: 1
Interdigit Pause: short
Page 2 of 7
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
PBX-Dial 1: (425/-11)(950)
2: (silence)(50)
3: (goto)(1)
4:
5:
6:
7:
8:
9:
10:
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
76 Brazil
Page 3 of 7
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
Secondary Dial 1: (425/-11)(5000)
2: (goto)(1)
3:
4:
5:
6:
7:
8:
9:
10:
Page 4 of 7
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
Ringback 1: (425/-11)(1000)
2: (silence)(4000)
3: (goto)(1)
4:
5:
6:
7:
8:
9:
10:
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
77 Brazil
Page 5 of 7
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
Busy 1: (425/-11)(250)
2: (silence)(250)
3: (goto)(1)
4:
5:
6:
7:
8:
9:
10:
Page 6 of 7
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
Intercept 1: (425/-11)(100)
2: (silence)(100)
3: (goto)(1)
4:
5:
6:
7:
8:
9:
10:
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
78 Brazil
Page 7 of 7
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
Intrusion 1: (425/-17.25)(50)
2: (silence)(2000)
3: (goto)(1)
4:
5:
6:
7:
8:
9:
10:
Page 7 of 7
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
Hold 1: (425/-11)(50)
2: (silence)(150)
3: (425/-11)(50)
4: (silence)(12750)
5: (goto)(1)
6:
7:
8:
9:
10:
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
79 Brazil
Trunk Group Administration
CO Trunk Group Administration
For 900 ohm op eration, if the Country field is 16
or 23
, set the Version field to a
(if
Country 5 sig naling is to b e used ) or b
(if Country 1 sig naling is to b e used ).
NOTE:
The following is valid only on TN465CV2 or later c irc uit pac ks.
Page 7 of 7
SYSTEM PARAMETERS COUNTRY-OPTIONS
Tone Name Cadence Tone
Step (Frequency/Level)
Conference 1: (425/-17.25)(50)
2: (silence)(12750)
3: (goto)(1)
4:
5:
6:
7:
8:
9:
10:
Page 1 of 10
TRUNK GROUP
Group Number: Group Type: co CDR Reports: y
Group Name: COR: 1 TN: 1 TAC:
Direction: two-way Outgoing Display? n
Dial Access? n Busy Threshold: 99 Night Service:
Queue Length: 0 Country: 1 Incoming Destination:
Comm Type: voice Auth Code? n Digit Absorption List:
Prefix-1? n Trunk Flash? n Toll Restricted? n
TRUNK PARAMETERS
Trunk Type: loop-start
Outgoing Dial Type: tone Cut-Through? n
Trunk Termination: 600 Disconnect Timing(msec): 500
Auto Guard? y Call Still Held? y Sig Bit Inversion: none
Terminal Balanced? y RA Trunk Loss: 0db
Trunk Gain: high
Disconnect Supervision - In? n Out? n Cyclical Hunt? n
Answer Supervision Timeout: 10 Receive Answer Supervision? n
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
80 Brazil
To enab le 600-ohm op eration, set the:
nCountry field set to 16
or 23
nVersion field to a
To enab le 900-ohm op eration, set the:
nCountry field set to 16
or 23
nVersion field to b
NOTE:
If the Country field is 23
, Bloc k Collec t Call is enab led . Set the Flash Leng th field to
2000
.
Page 2 of 10
TRUNK FEATURES
ACA Assignment? n Measured: none
Maintenance Tests? y
Data Restriction? n
Abandoned Call Search? n
Suppress # Outpulsing? y
Page 3 of 10
TRUNK GROUP
ADMINISTRABLE TIMERS
Incoming Disconnect(msec): 500 Outgoing Disconnect(msec): 500
Outgoing Dial Guard(msec): 1600
Incoming Glare Guard(msec): 1500 Outgoing Glare Guard(msec): 1500
Ringing Monitor(msec): 5200 Incoming Seizure(msec): 500
Outgoing End of Dial(sec): 10 Outgoing Seizure Response(sec): 5
Programmed Dial Pause(msec): 1500
Flash Length(msec): 540
END TO END SIGNALING
Tone(msec): 350 Pause(msec): 150
OUTPULSING INFORMATION
PPS: 10 Make(msec): 40 Break(msec): 60 PPM? n
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
81 Brazil
DIOD Trunk Group Administration
Page 4 of 10
TRUNK GROUP
Administered Members (min/max): 0/0
Total Administered Members: 0
GROUP MEMBER ASSIGNMENTS
Port Code Sfx Name Night Mode Type Ans Delay
1:
2:
3:
Page 1 of 10
TRUNK GROUP
Group Number: Group Type: diod CDR Reports: y
Group Name: COR: 1 TN: 1 TAC:
Direction: two-way Outgoing Display? n
Dial Access? n Busy Threshold: 99
Queue Length: 0 Country: 16
Auth Code? n Digit Absorption List:
Prefix-1? n Trunk Flash? n Toll Restricted? n
TRUNK PARAMETERS
Trunk Type: immed-start
Outgoing Dial Type: mf Incoming Dial Type: mf
Trunk Termination: 600
Digit Treatment: Digits:
Expected Digits: Sig Bit Inversion: none
Terminal Balanced? y RA Trunk Loss: 0db
Trunk Gain: high Drop Treatment: busy
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 10 Receive Answer Supervision? n
Page 2 of 20
TRUNK FEATURES
ACA Assignment? n Measured: none
Maintenance Tests? y
Data Restriction? n
Suppress # Outpulsing? y
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
82 Brazil
Page 3 of 10
TRUNK GROUP
ADMINISTRABLE TIMERS
Incoming Disconnect(msec): 500 Outgoing Disconnect(msec): 500
Incoming Dial Guard(msec): 70 Outgoing Dial Guard(msec): 1600
Incoming Glare Guard(msec): 1500 Outgoing Glare Guard(msec): 1500
Ringing Monitor(msec): 5200 Incoming Seizure(msec): 500
Outgoing End of Dial(sec): 10 Outgoing Seizure Response(sec): 5
Programmed Dial Pause(msec): 1500
Flash Length(msec): Incoming Incomplete Dial Alarm(sec): 255
END TO END SIGNALING
Tone(msec): 350 Pause(msec): 150
OUTPULSING INFORMATION
PPS: 10 Make(msec): 40 Break(msec): 60 PPM? n
Page 4 of 10
TRUNK GROUP
Administered Members (min/max): 0/0
GROUP MEMBER ASSIGNMENTS Total Administered Members: 0
Port Code Sfx Name Night Mode Type Ans Delay
1:
2:
3: