Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual

Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 484
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    243 Hungary 
    change system-parameters multifrequency-signaling        Page  2 of  3
           MULTIFREQUENCY-SIGNALING-RELATED SYSTEM PARAMETERS
     INCOMING FORWARD SIGNAL TYPES      INCOMING BACKWARD SIGNAL TYPES
     (Tones from CO)             (Tones to CO)
           Group-I             Group-II            Group-A             Group-B
      11: ignored          1: normal1 : next-digit      1 : busy
      12: ignored          2: normal3 : end-of-dial     2 : congestion
      13: ignored          3: normal4 : congestion4 : free
      14: ignored          4: normal7 : intercept
      15: ignored 5: normal : :
                           6: data-call : :
                           7: normal            :                   :
                           8: normal            :                   :
                           9: normal            :                   :
                          10: normal            :                   :
                          11: normal            :                   :
                          12: normal            :                   :
                          13: normal            :                   :
                          14: normal            :                   :
                          15: normal            :                   :
    change system-parameters multifrequency-signaling        Page  3 of  3
           MULTIFREQUENCY-SIGNALING-RELATED SYSTEM PARAMETERS
     OUTGOING FORWARD SIGNAL TYPES      OUTGOING BACKWARD SIGNAL TYPES
     (Tones from CO)             (Tones to CO):
    GROUP-I GROUP-II GROUP-A GROUP-B
    15: end-of-digits 1: normal 
    1: attendant 
    6: data-call1: next-digit 
    2: last-digit 
    3: end-of-dial
    4: congestion 
    5: call-info-ani 
    6: setup-sppath
    7: last-2-digits
    8: last-3-digits
    9: restart
    10: congestion
    11: congestion
    12: congestion
    13: congestion
    14: congestion
    15: congestion1: congestion
    2: congestion 
    3: busy 
    4: congestion
    5: intercept
    6: free
    7: free
    8: congestion
    9: congestion
    10: congestion
    11: congestion
    12: congestion
    13: congestion
    14: congestion
    15: congestion 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    244 Hungary 
    Hungarian Private Network Administration
    For this feature to work in Hung ary, fill out the following :
    — Dial Plan Rec ord  sc reen
    nFirst Dig it 0:
    misc
    nSec ond  Digit 03: FAC
    — Feature Ac c ess Cod e sc reen
    nAAR access code: 03
    — Multifreq uenc y-Sig naling -Related  System Parameters sc reen (first 
    page)
    nReq uest Inc oming  ANI (non-AAR/ARS): n
    nPrivate Group  II Permissions and  Pub lic  Interworking : y
    nOverlap  Send ing  on Link-to-Link Tand em Calls: y
    nCollec t all dig its b efore seizure: n
    — Multifreq uenc y-Sig naling -Related  System Parameters sc reen 
    (subsequent page)
    nTones from CO on Inc oming  Forward  Calls-Group I:
    I15 =  end-of-ani
    nConvert initial end-of-ani sig nal to dig its: 0
    nTones to CO on Outg oing  Forward  Calls -Group  I:
    I15 = end-of-digit
    nTones from CO on Inc oming  Forward  Call-Group  II
    n: normal
    (for eac h n that is ad ministered  as Class of Restric tion 
    Categ ory for MFC ANI:n)
    nTones to CO on Inc oming  Bac kward  Calls-Group  A:
    A5: send -ani
    — Tie trunk group screen
    nTrunk Type: imed /imed
    nInc oming  Dial Typ e: mf
    nOutg oing  Dial Typ e: mf
    nInc oming  d ig it treatment: inserted  d ig its
    nInserted  d ig its field s: 03
    — DID trunk g roup  sc reen
    nInc oming  Dial Typ e: mf
    nTrunk Type: imed -start 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    245 Hungary 
    nInc oming  d ig it treatment: inserted  d ig its
    nInserted  d ig its field s: 03
    — AAR Dig it Conversion Tab le (for long -d istanc e p rivate-network c all)
    nMatc h. Pat.: 0
    nmin: 3
    nmax: 7
    ndel: 0
    nRep l String : 
    nNet: AAR
    nConv: n
    nANI req: n
    — AAR Digit Conversion Table (for tandem local-area private-network 
    call)
    nMatc h. Pat.: 12
    nmin: 4
    nmax: 4
    ndel: 0
    nRep l String : 
    nNet: AAR
    nConv: n
    nANI req: n
    — AAR Dig it Conversion Tab le (for terminating  p rivate-network c all)
    nMatc h. Pat.: 22
    nmin: 4
    nmax: 4
    ndel: 0
    nRep l String : 
    nNet: ext
    nConv: n
    nANI req: n
    — AAR Digit Conversion Table (for terminating DID c all from public  
    network)
    nMatc h. Pat.: 12
    nmin: 4 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    246 Hungary 
    nmax: 4
    ndel: 0
    nRep l String : 
    nNet: ext
    nConv: n
    nANI req: n
    — AAR Digit Conversion Table (for terminating DID c all to special 
    emergenc y servic e p rovid ing  extension)
    nMatc h. Pat.: 07
    nmin: 2
    nmax: 2
    ndel: 2
    nRepl String: 1000 (for example)
    nNet: ext
    nConv: n
    nANI req: y
    — Class of Restric tion sc reens (COR #1 – COR #8)
    nCateg ory for MFC ANI: 1 – 8 (resp ec tively)
    — AAR Route Pattern sc reen
    nNo. Del. d ig its: 1 or 3
    nInserted  d ig its: * (If No. Del. dig its =  1. Leave b lank if No. 
    Del. digits = 3) 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    247 India 
    India
    Ta b l e  3 4 shows the rec ommended  c irc uit p ac ks.
    Table 34. Recommended and Available CPs in India
    Equipment Equipment Type
    Cab inet Typ e & Power GAC-MCC DC-MCC AC-SCC AC-CSCC 
    AC-CMC
    AC Power Voltag e & Freq 220V/50Hz
    Ring  Generator 25Hz
    Tone Detec tor #TN2182B #TN744D
    Tone Cloc k #TN2182B
    R2MFC Circ uit n/a
    Sp eec h Synthesizer #TN433 
    Call Classifier > TN744D
    Announc ement  #TN750C
    Analog  DID Trunk #TN753
    Analog  CO Trunk (No PPM)  #TN747B
    Analog  CO Trunk (w/PPM) #TN465C
    4 Wire Tie Trunk #TN760D
    2 Wire Tie Trunk
    Auxiliary Trunk #TN763D 
    Dig ital CO/DID Trunk > TN464Fv5 
    D i g i t a l  Ti e  Tr u n k > TN 4 6 4 Fv 5
    Dig ital PRI CO Trunk
    Dig ital BRI Trunk
    Dig ital Converter PRI-DASS   
    Dig ital Converter PRI-DPNSS
    Dig ital Converter PRI-BRI   
    8 Port Analog  Line n/a
    16 Port Analog  Line #TN2183
    24 Port Analog  Line TN2793
    Continued on next page 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    248 India 
    NOTE:
    A-law c ompand ing  is the national stand ard  in Ind ia. However, 
    Mu-law is used  internally to the system for servic e c irc uits and  
    analog  lines. Network interfac es are c onfig ured  as A-law if req uired .
    Feature Administration
    The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e 
    ap p roval was award ed . The sc reens may have c hang ed  sinc e that d ate.
    Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
    c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
    nARS/AAR Ad ministration 
    In the AAR Dig it Conversion tab le, d elete all d efault entries. In the IXC 
    tab le, d elete all d efault values on p ag e 2.
    To enab le ARS administration, on the System-Parameters 
    Customer-Op tions sc reen, set the ARS
     field  to y
    . You also should check all 
    ARS/AAR d efaults. All d efault ARS analysis c odes are deleted  b efore 
    d ialed  strings are ad d ed for routing when DEFINITY is installed  outsid e of 
    North Americ a. Be aware that the d efault for the 10 d ig its c ause dialing 
    p rob lems. In p artic ular, the following  c all typ es (ap pear as ARS/AAR 
    d efaults) typ ic ally are not used  in non-North Americ an ARS/AAR tab les: 4 Wire Digital Line #TN754C 
    2 Wire Digital Line #TN2224
    Data Line #TN726B 
    BRI-U Line #TN2198
    BRI-ST Line
    fnp a: North Americ an numb ers with an area c od e.
    hnp a: North Americ an numb ers without an area c od e.
    svc : North Americ an numb ers of the sc reen ‘‘x11’’.
    Ta b l e  3 4 .Recommended and Available CPs in India — Continued
    Equipment Equipment Type
    Continued on next page 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    249 India 
    Luc ent rec ommend s only the following  c all typ es b e used  outside North 
    Americ a:
    System Parameter Administration
    Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
    c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
    Feature-Related System Parameters
    int: For all international numb ers.
    natl: For all national PN numbers.
    p ub u: For all other external (that is, not extensions) 
    numbers.
                                                                     Page   1 of  6
                             FEATURE-RELATED SYSTEM PARAMETERS
                                     Trunk-to-Trunk Transfer: all
    Coverage Subsequent Redirection/CFWD  No Answer Interval: 2
               Coverage - Caller Response Interval (seconds): 4
                             Keep Held SBA at Coverage Point? y
     Automatic Callback - No Answer Timeout Interval (rings): 3
                        Call Park Timeout Interval (minutes): 10
         Off-Premises Tone Detect Timeout Interval (seconds): 20
                                  AAR/ARS Dial Tone Required? y
                                          Music/Tone on Hold: tone
               Music (or Silence) on Transferred Trunk Calls? no
                            DID/Tie/ISDN Intercept Treatment: attd
                   Messaging Service Adjunct (MSA) Connected? n
      Internal Automatic Answer for Attendant Extended Calls? n
                   Automatic Circuit Assurance (ACA) Enabled? n 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    250 India 
                                                                    Page   2 of  6
                                FEATURE-RELATED SYSTEM PARAMETERS
    LEAVE WORD CALLING PARAMETERS
      Maximum Number of Messages Per Station (when MSA not in service):10
      Stations with System-wide Retrieval Permission (enter extension)
      1:          2:          3:          4:          5:
      6:          7:          8:          9:         10:
      WARNING!    SEE USER DOCUMENTATION BEFORE CHANGING TTI STATE 
                    Terminal Translation Initialization (TTI) Enabled? n
                       Prohibit Bridging Onto Calls With Data Privacy? n
                            Enhanced Abbreviated Dial Length (3 or 4): 3
                                                Call Forward Override? n
           External Coverage Treatment for Transferred Incoming Calls? n
    SECURITY VIOLATION NOTIFICATION (SVN) PARAMETERS HAVE MOVED TO
    THE SYSTEM-PARAMETERS SECURITY SCREEN
                                                                     Page   3 of  6
                             FEATURE-RELATED SYSTEM PARAMETERS
                         Reserved Slots for Attendant Priority Queue: 5
                                          Time before Off-hook Alert: 10
                              Emergency Access Redirection Extension: 
                                      Service Observing Warning Tone? y
                Number of Emergency Calls Allowed in Attendant Queue: 5
                                                Call Pickup Alerting? n
                   Deluxe Paging and Call Park Timeout to Originator? n
          Controlled Outward Restriction Intercept Treatment: tone
         Controlled Termination Restriction (Do Not Disturb): tone
                   Controlled Station to Station Restriction: tone
    AUTHORIZATION CODE PARAMETERS        Authorization Codes Enabled? n 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    251 India 
                                                                     Page   4 of  6
                              FEATURE-RELATED SYSTEM PARAMETERS
    SYSTEM PRINTER PARAMETERS
                 System Printer Extension:                      Lines Per Page: 30
                      EIA Device Bit Rate: 9600
    SYSTEM-WIDE PARAMETERS
                              Switch Name: H.V.NET THANE
    CALL CENTER SYSTEM PARAMETERS
    CALL MANAGEMENT SYSTEM PARAMETERS
            BCMS/VuStats Measurement Interval: hour
    BCMS/VuStats Abandon Call Timer (seconds):              Validate Login IDs? n
              ACD Login Identification Length: 0           Adjunct CMS Release:
    MALICIOUS CALL TRACE PARAMETERS
                   Apply MCT Warning Tone? n    MCT Voice Recorder Trunk Group:
                                                                     Page   5 of  6
                               FEATURE-RELATED SYSTEM PARAMETERS
                               Public Network Trunks on Conference Call: 5
                          Conference Parties with Public Network Trunks: 6
                       Conference Parties without Public Network Trunks: 6
                               Night Service Disconnect Timer (seconds): 180
                                       Short Interdigit Timer (seconds): 5
                                    Unanswered DID Call Timer (seconds):    
                                    Line Intercept Tone Timer (seconds): 30
                                                             Auto Start? n
                                                              Auto Hold? n
                                                         Attendant Tone? y
                                                          Bridging Tone? y
                                                          Bridging Tone? n
                                                        Conference Tone? n
                                                         Intrusion Tone? n
                                                     DID Busy Treatment: tone
                                     Allow AAR/ARS Access from DID/DIOD? n
      DISTINCTIVE AUDIBLE ALERTING
                           Internal: 1   External: 2   Priority: 3
                                     Attendant Originated Calls: external 
    						
    							DEFINITY® Enterprise Communications Server Application Notes 
    for Type Approval    Issue 1
    June 1999
    Application Notes for Type Approval 
    252 India 
    System Parameters Country-Options
                                                                     Page   6 of  6
                            FEATURE-RELATED SYSTEM PARAMETERS
                     Pull Transfer: n            Update Transferred Ring Pattern? n
             Outpulse Without Tone? y              Wait Answer Supervision Timer? n
             Misoperation Alerting? n               Repetitive Call Waiting Tone? y
        Allow Conference via Flash? y     Repetitive Call Waiting Interval (sec): 16
     Vector Disconnect Timer (min):       Network Feedback During Tone Detection? y
                                         System Updates Time On Station Displays? n
          Intercept Treatment On Failed Trunk Transfers? n
                        Station Tone Forward Disconnect: silence
                                Level Of Tone Detection: precise
    RECALL TIMING
            Flashhook Interval? y                       Upper Bound (msec): 760
                                                        Lower Bound (msec): 200
                                           Forward Disconnect Timer (msec): 600
    ENHANCED DCS
          Enhanced DCS Enabled? n
                                                                     Page   1 of  21
                              SYSTEM PARAMETERS COUNTRY-OPTIONS
                 Companding Mode: Mu-Law             Base Tone Generator Set: 1
             440Hz PBX-dial Tone? n                440Hz Secondary-dial Tone? n
               Digital Loss Plan: 1
          Analog Ringing Cadence: 1       Set Layer 1 timer T1 to 30 seconds? n
        Analog Line Transmission: 1      Enhanced 84xx Display Character Set? n
    TONE DETECTION PARAMETERS
             Tone Detection Mode: 6
                Interdigit Pause: short 
    						
    All Lucent Technologies manuals Comments (0)

    Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual