Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual
Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual
Have a look at the manual Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 433 Sri Lanka 4 Wire Digital Line > TN754C 2 Wire Digital Line #TN2214 > TN2181 Data Line > TN726B BRI-U Line BRI-ST Line TN556B Table 55. Recommended and Available CPs in Sri Lanka Equipment Equipment Type Continued on next page
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 434 Switzerland Switzerland Ta b l e 5 6 shows the rec ommended c irc uit p ac ks. Table 56. Recommended and Available CPs in Switzerland Equipment Equipment Type Cab inet Typ e & Power DC-MCC AC-SCC AC-CSCC AC-CMC AC Power Voltag e & Freq 220V/50Hz Ring Generator 25Hz Tone Detec tor > TN2182B > TN744D TN420C Tone Cloc k > TN2182B TN780 R2MFC Circ uit > TN744D Speech Synthesizer > TN457 Call Classifier > TN744D Announc ement TN750C TN750B Analog DID Trunk Analog CO Trunk (No PPM) Analog CO Trunk (w/PPM) 4 Wire Tie Trunk 2 Wire Tie Trunk Auxiliary Trunk Dig ital CO/DID Trunk TN464F D i g i t a l Ti e Tr u n k > TN 4 6 4 F Dig ital PRI CO Trunk Dig ital BRI Trunk > TN2185 Dig ital Converter PRI-DASS Dig ital Converter PRI-DPNSS Dig ital Converter PRI-BRI 8 Port Analog Line n/a 16 Port Analog Line > TN2183 24 Port Analog Line n/a Continued on next page
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 435 Switzerland 4 Wire Digital Line > TN754B 2 Wire Digital Line #TN2224 > TN2181 Data Line > TN726B BRI-U Line BRI-ST Line Ta b l e 5 6 .Recommended and Available CPs in Switzerland — Continued Equipment Equipment Type Continued on next page
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 436 Taiwan Taiwan Ta b l e 5 7 shows the rec ommended c irc uit p ac ks. Table 57. Recommended and Available CPs in Taiwan Equipment Equipment Type Cab inet Typ e & Power GAC-MCC AC-MCC DC-MCC AC-SCC DC-SCC AC-CSCC AC-CMC AC Power Voltag e & Freq 110V/60Hz 220V/60Hz Ring Generator 20Hz Tone Detec tor > TN2182B > TN744D TN748D TN756 Tone Cloc k > TN2182B TN780 TN756 R2MFC Circ uit n/a Sp eec h Synthesizer > TN725B Call Classifier > TN744D Announc ement TN750C TN750B Analog DID Trunk > TN753 Analog CO Trunk (No PPM) > TN747B Analog CO Trunk (w/PPM) 4 Wire Tie Trunk > TN760D 2 Wire Tie Trunk Auxiliary Trunk > TN763D TN763C Dig ital CO/DID Trunk Dig ital Tie Trunk > TN464F TN464E TN464D TN464C TN767 Dig ital PRI CO Trunk n/a Dig ital BRI Trunk > TN2185 Dig ital Converter PRI-DASS Dig ital Converter PRI-DPNSS Dig ital Converter PRI-BRI 8 Port Analog Line TN742 16 Port Analog Line > TN746B 24 Port Analog Line TN2793 Continued on next page
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 437 Taiwan Feature Administration The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e ap p roval was award ed . The sc reens may have c hang ed sinc e that d ate. Only those feature-related p arameters that may have a Typ e Ap p roval or b asic c onnec tivity imp lic ation for a p artic ular c ountry are listed here. nARS/AAR Ad ministration To enab le ARS administration, on the System-Parameters Customer-Op tions sc reen, set the ARS field to y . You also should check all ARS/AAR d efaults. All d efault ARS analysis c odes are deleted b efore d ialed strings are ad d ed for routing when DEFINITY is installed outsid e of North Americ a. Be aware that the d efault for the 10 d ig its c ause dialing p rob lems. In p artic ular, the following c all typ es (ap pear as ARS/AAR d efaults) typ ic ally are not used in non-North Americ an ARS/AAR tab les: Luc ent rec ommend s only the following c all typ es b e used outside North Americ a: 4 Wire Digital Line > TN754B 2 Wire Digital Line #TN2224 > TN2181 Data Line > TN726B BRI-U Line BRI-ST Line fnp a: North Americ an numb ers with an area c od e. hnp a: North Americ an numb ers without an area c od e. svc : North Americ an numb ers of the screen ‘‘x11’’. int: For all international numbers. natl: For all national PN numb ers. pubu: For all other external (that is, not extensions) numbers. Ta b l e 5 7 .Recommended and Available CPs in Taiwan — Continued Equipment Equipment Type Continued on next page
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 438 Taiwan System Parameter Administration Only those feature-related p arameters that may have a Typ e Ap p roval or b asic c onnec tivity imp lic ation for a p artic ular c ountry are listed here. nFeature-Related System Parameters Ad ministration — Trunk-to-Trunk Transfer: Permitted b y c ountry’s reg ulations - Selec tion is c ustomer’s c hoic e. — Pub lic Network Trunks on Conferenc e Call: 5 — Conferenc e Parties With PNTs: 6 — Conferenc e Parties Without PNTs: 6 — Line Interc ep t Tone Timer: 30 — Nig ht Servic e Disc onnec t Timer: 180 sec — Short Interd ig it Timer: 3 sec — Unanswered DID Call Timer: 60 —Auto-Hold: Yes 23 — Attend ant Tone: Yes — Bridg ing Tone: No — Conferenc e Tone: No — Intrusion Tone: Yes — Rep etitive Call Waiting Tone: No — DID Busy Treatment: Attend ant — Pull Transfer: No — Level of Tone Detec tion: Broad b and — Outp ulse Without Tone: Yes — (Station-to-switc h) Rec all Timing : nFlashhook Interval: Yes nUp p er Bound : 1000 ms nLower Bound : 200 ms nCountry Op tions Parameters — Comp and ing Mode: mu-law — Base Tone Generation Set: 1 — Tone Detec tion Mod e: d efault — Interdigit Pause: default 23. Althoug h not a Type App roval issue, this rep resents the convention for this country.
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 439 Taiwan — Dig ital Loss Plan: 1 — Analog Ringing Cadence: 1 — 440 Hz PBX-d ial Tone: yes — 440 Hz Sec ond ary-d ial Tone: no Analog Trunk Administration nCO Trunks — Trunk Group Sc reen nGroup Typ e: CO nCountry: 1 nTrunk Gain: hig h nDirec tion: two-way nDig it Ab sorp tion List: b lank nPre f i x -1 : N o nTrunk Type: loop -start nOutg oing Dial Typ e: tone nTrunk Termination: rc (c omp lex imp ed anc e) nAuto Guard : no nDial Acc ess: yes nCall Still Held : no nTerminal Balanc ed : yes nRec eive Answer Sup ervision: no nAnswer Supervision Timeout: 10 (This sets both the CP firmware timer and software timer. Set to 0 for any trunk that will rec eive answer sup ervision.) nDisc onnec t Sup ervision - In: no nDisc onnec t Sup ervision - Out: Selec tion is c ustomer’s choice. nDisc onnec t Timing : 500 ms (This field will not be used with CPs that c an ac c ep t the Inc oming Disc onnec t and Outg oing Disc onnec t timers. Set these latter two timers from the Ad ministrab le Timers Sc reen.) — Trunk Group Ad ministration Sc reen (Timing ) Set the following timers from the Administrab le Timers sc reen d uring ad ministration of eac h trunk g roup . Selec t the following CO trunk timer values for this c ountry:
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 440 Taiwan nInc oming Disc onnec t: 500 ms nOutg oing Disc onnec t: 500 ms nOutg oing Dial Guard : 1600 ms nInc oming Glare Guard : 1500 ms nOutg oing Glare Guard : 1500 ms nOutg oing Dial Pulse Rate (PPS): 10 p p s nOutg oing Rotary Dig it Dial Make: 35 ms nOutg oing Rotary Dig it Dial Break: 65 ms nOutg oing Rotary Dial Interd igit: 800 ms nRing Monitor Timer: 5200 ms nInc oming Seizure: 500 ms nOutg oing End -of-Dial: 10 sec nOutg oing Seizure Resp onse: 240 sec nProg rammed Dial Pause: 1500 ms nDisc onnec t Sig nal Error: 240 sec nFlash Leng th: 100 ms nPPM : n o nDID Trunks — Trunk Group Sc reen nGroup Typ e: DID nCountry: 1 nTrunk Gain: hig h nDig it Ab sorp tion List: b lank nInc oming Dial Typ e: tone nTrunk Type: immed -start nTrunk Termination: rc (c omp lex imp ed anc e) nDisc onnec t Sup ervision: no nDisc onnec t Timing : 500 ms (This field will not be used with CPs that c an ac c ep t the Inc oming Disc onnec t and Outg oing Disc onnec t timers. Set these latter two timers from the Ad ministrab le Timers Sc reen.) nDig it Treatment: b lank nDig its: b lank nExp ec ted Dig its: d ep end s on system size and numb ering plan
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 441 Taiwan nTerminal Balanc ed : yes nExtend ed Loop Range: (Used Only with TN459) no nDrop Treatment: silenc e nInc oming Rotary Timeout (sec ): 5 sec (This field will not b e used with CPs that c an ac c ept the Inc oming Partial Dial timer. Set this timer from the Ad ministrab le Timers Sc reen.) — Trunk Group Ad ministration Sc reen (Timing ) Set the following timers from the Administrab le Timers sc reen d uring ad ministration of eac h trunk g roup . Selec t the following DID trunk timer values for this c ountry: nInc oming Disc onnec t: 500 ms nInc oming Dial Guard : 50 ms nInc oming Partial Dial: 18 sec nInc oming Inc omplete Dial: 255 sec nFlash Leng th: 100 ms nTi e Tru n k s No sp ec ial Typ e Ap p roval reg ulations ap ply. Tie trunks are ad ministered on a c ase-b y-c ase b asis. Digital Trunk Administration This sec tion d oes not list all p ossib le valid ad ministrable c omb inations. Rather the most c ommon or stand ard c ombination, c omp atib le with p ub lic -network and Typ e Ap proval stand ard s for eac h c ountry, is p resented : nCO Trunks Not availab le in this c ountry. nDID Trunks Not availab le in this c ountry. nTi e Tru n k s — Non-ISDN Sig naling Examp le (DS1 Ad ministration sc reen) nCirc uit Pac k: TN464D (or TN464C,TN767) nBit Rate: 1.544 nInterfac e Comp anding : mu-law nLine Cod ing: B8ZS nLine Comp ensation: 1 nFraming Mode: esf nSignaling Mode: common-chan
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 442 Taiwan nCountry Protoc ol: 5 nCRC?: no nId le Cod e: 11111111 nDMI-BOS? Yes — ISDN-PRI (Private Network) Sig naling This examp le assumes use of US Op tion 1 with fac ility assoc iated sig naling . Other feature op tions will req uire c hang es in one or more ad ministered items. — DS1 Ad ministration sc reen nCirc uit Pac k: TN464D (or TN464C,B from up g rad es) nBit Rate: 2.048 nInterfac e Comp anding : A-law nLine Cod ing: HDB3 nSignaling Mode: isdn-pri nCountry Protoc ol: 1 nConnec t: p b x nInterfac e: user nCRC: No nId le Cod e: 11111111 — Sig naling Group sc reen nAssoc iated Sig naling : Yes nPrimary D_Channel: xxxx16 (xxxx= > dep end s on CP p hysical location) — Trunk Group Ad ministration sc reen nGroup Type: isdn-pri nServic e Type: tie — ISDN-PRI (Public Network) Not available in this c ountry.