Home > Lucent Technologies > Communications System > Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual

Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 484
    Add page 271 to Favourites
    image text
    Enable zoom 
    							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
263 Israel 
4 Wire Digital Line
2 Wire Digital Line
Data Line
BRI-U Line
BRI-ST Line
Table 36. Recommended and Available CPs in Israel
Equipment Equipment Type
Continued on next page
    Add page 272 to Favourites
    image text
    Enable zoom 
    							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
264 Italy (Lucent Technologies) 
Italy (Lucent Technologies)
Ta b l e  3 7 shows the rec ommended  c irc uit p ac ks.
Table 37. Recommended and Available CPs in Italy (Lucent Technologies)
Equipment Equipment Type
Cab inet Typ e & Power GAC-MCC DC-MCC AC-SCC AC-CSCC 
AC-CMC
AC Power Voltag e & Freq 220V/50Hz
Ring Generator 25Hz
Tone Detec tor > TN2182B > TN744D TN420C
Tone Cloc k > TN2182B TN780 
R2MFC Circ uit n/a
Sp eec h Synthesizer > TN433 
Call Classifier > TN744D
Announc ement TN750C TN750B
Analog  DID Trunk > TN2179
Analog  CO Trunk (No PPM)  n/a
Analog  CO Trunk (w/PPM) #TN465C > TN2138
4 Wire Tie Trunk > TN2140B TN2140
2 Wire Tie Trunk n/a
Auxiliary Trunk > TN763D 
Dig ital CO/DID Trunk > TN464Fv5 
Dig ital Tie Trunk > TN464Fv5
Dig ital PRI CO Trunk
Dig ital BRI Trunk > TN2185
Dig ital Converter PRI-DASS   
Dig ital Converter PRI-DPNSS TN-CCSC-2
Dig ital Converter PRI-BRI   
8 Port Analog  Line n/a
16 Port Analog  Line #TN2183 > TN2135
24 Port Analog  Line n/a
Continued on next page
    Add page 273 to Favourites
    image text
    Enable zoom 
    							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
265 Italy (Lucent Technologies) 
Country-Specific Feature
You c an use DEFINITY ECS the Europ ean CEPT Ad vic e of Charg e feature in Italy. 
Refer to the DEFINITY ECS Ad ministration and  Feature Desc ription for more 
information ab out Ad vic e of Charg e.
Feature Administration
The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e 
ap p roval was award ed . The sc reens may have c hang ed  sinc e that d ate.
Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
nARS/AAR Ad ministration
To enab le ARS administration, on the System-Parameters 
Customer-Op tions sc reen, set the ARS
 field  to y
. You also should check all 
ARS/AAR d efaults. These d efaults were intended  for U.S. op eration and  
c ertain values are likely to b e inap p ropriate internally. In p artic ular, the 
following c all types (appear as ARS/AAR defaults) typically are not used in 
non-North Americ an ARS/AAR tab les: 4 Wire Digital Line > TN754B 
2 Wire Digital Line #TN2224 > TN2181 
Data Line > TN726B 
BRI-U Line
BRI-ST Line
fnp a: North Americ an numb ers with an area c od e.
hnp a: North Americ an numb ers without an area c od e.
svc North Americ an numb ers of the screen ‘‘x11’’.
Table 37. Recommended and Available CPs in Italy (Lucent Technologies)
Equipment Equipment Type
Continued on next page
    Add page 274 to Favourites
    image text
    Enable zoom 
    							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
266 Italy (Lucent Technologies) 
Luc ent rec ommend s only the following  c all typ es b e used  outside North 
Americ a:
System Parameter Administration
Only those feature-related  p arameters that may have a Typ e Ap p roval or b asic  
c onnec tivity imp lic ation for a p artic ular c ountry are listed  here.
nFeature-Related System Parameters Ad ministration
— System-Parameters Customer-Op tions
nOff Premise Tone Detec tion Timeout: 10 sec
nTrunk-to-Trunk Transfer: Restric ted
nCoverag e - Sub sequent Redirec tion No Answer Interval: 3
nMusic /Tone on Hold : tone
nDID/TIE/ISDN Interc ep t Treatment: Attend ant
nTime b efore Off-hook Alert: 10
nServic e Ob serving  Warning  Tone: Yes
nPub lic  Network Trunks on Conferenc e Call: 1
nConference Parties With PNTs: 3
nConferenc e Parties Without PNTs: 6
nLine Interc ep t Tone Timer: 30
nNig ht Servic e Disc onnec t Timer: 180 sec
nShort Interd ig it Timer: 3 sec
nUnanswered DID Call Timer: 25 sec
nAuto-Hold : Yes1
nAttend ant Tone: Yes
nBridg ing  Tone: No
nConferenc e Tone: No
nIntrusion Tone: Yes
nRep etitive Call Waiting Tone: Yes
nDID Busy Treatment: Attend ant
nPull Transfer: Yes int: For all international numb ers.
natl: For all national PN numb ers.
p ub u: For all other external (that is, not extensions) numb ers.
    Add page 275 to Favourites
    image text
    Enable zoom 
    							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
267 Italy (Lucent Technologies) 
nUp d ate Transferred  Ring  Pattern: Yes
nLevel of Tone Detec tion: Prec ise
nWait Answer Sup ervision Timer: Yes
nMisop eration Alerting : Yes
nAllow c onferenc e via Flash: Yes
nOutp ulse Without Tone: No
nNetwork Feed b ac k During  Tone Detec tion: No
nInterc ept Treatment On Failed  Trunk Transfers: Yes
nStation Tone Forward  Disc onnec t: Interc ep t
n(Station-to-switc h) Rec all Timing :
nFlashhook Interval: Yes
nUp p er Bound : 1000 ms
nLower Bound : 200 ms
— System Parameter Country Op tions Ad ministration
nComp and ing  Mode: A-law
nBase Tone Generation Set: 4
nTone Detec tion Mod e: 1
nDig ital Loss Plan: 4
nInterd ig it Pause: short
nAnalog  Ring ing  Cad enc e: 4
nAnalog  Line Transmission: 4
nCustomized  Ind ivid ual Tones
Analog Trunk Administration
nCO Trunks
— Trunk Group  Sc reen
nGroup  Typ e: CO
nDirec tion: two-way
nDial Ac c ess: Customer Op tion (No is rec ommend ed  to avoid  
toll fraud ) (Yes, for app roval testing)
nCountry: 4
nTrunk Gain: hig h
nDig it Ab sorp tion List: b lank
nPre f i x -1 :  N o
    Add page 276 to Favourites
    image text
    Enable zoom 
    							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
268 Italy (Lucent Technologies) 
nTrunk Type: loop -start or g round -start
nOutg oing  Dial Typ e: tone
nTrunk Termination: rc  (c omp lex imp ed anc e)
nDisc onnec t Timing : 500 ms (This field  will not be used  with 
CPs that c an ac c ep t the Inc oming  Disc onnec t and  Outg oing  
Disc onnec t timers. Set these latter two timers from the 
Ad ministrab le Timers Sc reen.)
nParameters b ased  on loop  leng th (whic h itself is not 
ad ministrable)
nAuto Guard : no
nCall Still Held : no
nRec eive Answer Sup ervision: no
nAnswer Supervision Timeout: 10 (This sets both the CP 
firmware timer and  software timer. Set to 0 for any trunk that 
will rec eive answer sup ervision.)
nDisc onnec t Sup ervision - In: no
nDisc onnec t Sup ervision - Out: (Selec tion is c ustomers 
choice.
— Trunk Group  Ad ministration sc reen (Timing )
Set the following  timers from the Administrab le Timers sc reen 
d uring ad ministration of eac h trunk g roup . Selec t the following  CO 
trunk timer values for this c ountry:
nInc oming  Disc onnec t: 50 ms
nOutg oing  Disc onnec t: 50 ms
nOutg oing  Dial Guard : 1000 ms
nInc oming  Glare Guard : 200 ms
nOutg oing  Glare Guard : 200 ms
nRing  Monitor Timer: 5200 ms
nInc oming  Seizure: 500 ms
nOutg oing  End -of-Dial: 10 sec
nOutg oing  Seizure Resp onse: 20 sec
nProg rammed  Dial Pause: 1500 msLoop Length Trunk Gain Terminal Balance
short low y
long hig h y
    Add page 277 to Favourites
    image text
    Enable zoom 
    							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
269 Italy (Lucent Technologies) 
nDisc onnec t Sig nal Error: 255 sec  (only Ground  Start)
nFlash Leng th: 100 ms
nOutp ulsing  Information:
— PPS:  1 0  p p s
— Make: 50 ms
— Break: 50 ms
— PPM :  Ye s
— Freq uenc y: 12kHz
nEn d  t o  En d  Sig n a li n g
— Tone: 350 ms (ac c ep t default)
nDID Trunks
— Trunk Group  sc reen
nGroup  Typ e: DID
nCountry: 4
nTrunk Type: immed -start
nInc oming  Dial Typ e: tone
nTrunk Termination: rc  (c omp lex imp ed anc e)
nDisc onnec t Timing : 500 ms (This field  will not be used  with 
CPs that c an ac c ep t the Inc oming  Disc onnec t and  Outg oing  
Disc onnec t timers. Set these latter two timers from the 
Ad ministrab le Timers Sc reen.)
nDig it Treatment: b lank
nDig its: b lank
nExp ec ted  Dig its: d ep end s on system size and  numb ering  
plan
nTerminal Balanc ed : yes
nExtend ed  Loop  Range: (Used  Only with TN459) no
nDrop  Treatment: silenc e
nTrunk Gain: hig h
nDisc onnec t Sup ervision: no
nInc oming  Rotary Timeout (sec ): 5 sec  (This field  will not b e 
used  with CPs that c an ac c ept the Inc oming  Partial Dial 
timer. Set this timer from the Ad ministrab le Timers sc reen.)
    Add page 278 to Favourites
    image text
    Enable zoom 
    							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
270 Italy (Lucent Technologies) 
— Trunk Group  Ad ministration sc reen (Timing )
Set the following  timers from the Administrab le Timers sc reen 
d uring ad ministration of eac h trunk g roup . Selec t the following  DID 
trunk timer values for this c ountry:
nInc oming  Disc onnec t: 500 ms
nInc oming  Dial Guard : 50 ms
nFlash Leng th: 100 ms
nInc oming  Inc omplete Dial Alarm: 255 sec
nTi e  Tru n k s
The TN2140B is used  for E&M trunks that may b e ad ministered  as either 
Continuous or Disc ontinuous. This sec tion lists the only valid  
ad ministration c omb inations p ossib le for these trunks.
Use the following  ad ministration for these typ es:
— Continuous T1
nGroup  Typ e: tie, tand em, ac c ess, ap lt, or rlt
nDial Ac c ess: Customer Op tion (No is rec ommend ed  to avoid  
toll fraud ) (Yes, for app roval testing)
nTrunk Sig naling  Typ e: c ont
nTrunk Type (in/out): c ont/c ont
nSend  Release Ac k: y
nRec eive Release Ac k: y
nDisc onnec t Sup ervision - In: no
nDisc onnec t Sup ervision - Out: (Selec tion is c ustomers 
choice.)
nSend  Answer Sup ervision: n
nRec eive Answer Sup ervision: n
— Continuous T2
nGroup  Typ e: tie, tand em, ac c ess, ap lt, or rlt
nTrunk Sig naling  Typ e: c ont
nDial Ac c ess: Customer Op tion (No is rec ommend ed  to avoid  
toll fraud ) (Yes, for app roval testing)
nTrunk Type (in/out): immed /immed
nSend  Release Ac k: y
nRec eive Release Ac k: y
nDisc onnec t Sup ervision - In: no
    Add page 279 to Favourites
    image text
    Enable zoom 
    							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
271 Italy (Lucent Technologies) 
nDisc onnec t Sup ervision - Out: (Selec tion is c ustomers 
choice.)
nSend  Answer Sup ervision: y
nRec eive Answer Sup ervision: y
— Disc ontinuous T1
nGroup  Typ e: tie, tand em, ac c ess, ap lt, or rlt
nTrunk Signaling Type: dis
nDial Ac c ess: Customer Op tion (No is rec ommend ed  to avoid  
toll fraud ) (Yes, for app roval testing)
nTrunk Type (in/out): immed /immed
nSend  Release Ac k: y
nRec eive Release Ac k: y
nDisc onnec t Sup ervision - In: no
nDisc onnec t Sup ervision - Out: (Selec tion is c ustomers 
choice.)
nSend  Answer Sup ervision: n
nRec eive Answer Sup ervision: n
— Disc ontinuous T2
nGroup  Typ e: tie, tand em, ac c ess, ap lt, or rlt
nTrunk Signaling Type: dis
nDial Ac c ess: Customer Op tion (No is rec ommend ed  to avoid  
toll fraud ) (Yes, for app roval testing)
nTrunk Type (in/out): d isc /d isc
nSend  Release Ac k: n
nRec eive Release Ac k: n
nDisc onnec t Sup ervision - In: no
nDisc onnec t Sup ervision - Out: (Selec tion is c ustomers 
choice.)
nSend  Answer Sup ervision: y
nRec eive Answer Sup ervision: y
— Disc ontinuous T3
nGroup  Typ e: tie, tand em, ac c ess, ap lt, or rlt
nTrunk Signaling Type: dis
nDial Ac c ess: Customer Op tion (No is rec ommend ed  to avoid  
toll fraud ) (Yes, for app roval testing)
    Add page 280 to Favourites
    image text
    Enable zoom 
    							DEFINITY® Enterprise Communications Server Application Notes 
for Type Approval    Issue 1
June 1999
Application Notes for Type Approval 
272 Italy (Lucent Technologies) 
nTrunk Type (in/out): d isc /d isc
nSend  Release Ac k: n
nRec eive Release Ac k: n
nDisc onnec t Sup ervision - In: no
nDisc onnec t Sup ervision - Out: (Selec tion is c ustomers 
choice.)
nSend  Answer Sup ervision: n
nRec eive Answer Sup ervision: n
— Disc ontinuous T5
nGroup  Typ e: tie, tand em, ac c ess, ap lt, or rlt
nTrunk Signaling Type: dis
nDial Ac c ess: Customer Op tion (No is rec ommend ed  to avoid  
toll fraud ) (Yes, for app roval testing)
nTrunk Type (in/out): immed /immed
nSend  Release Ac k: n
nRec eive Release Ac k: n
nDisc onnec t Sup ervision - In: no
nDisc onnec t Sup ervision - Out: (Selec tion is c ustomers 
choice.)
nSend  Answer Sup ervision: n
nRec eive Answer Sup ervision: n
— Trunk Group  Ad ministration sc reen (Timing ) 
Set the following  timers from the Administrab le Timers sc reen 
d uring ad ministration of eac h trunk g roup . Selec t the following  Tie 
trunk timer values for this c ountry:
nInc oming  Disc onnec t: 300 ms (E&M c ont)
nOutg oing  Disc onnec t: 300 ms (E&M c ont)
nOutg oing  Dial Guard : 400 ms (E&M c ont, d is)
nInc oming  Glare Guard : 800 ms (E&M c ont, d is)
nOutg oing  Glare Guard : 1000 ms (E&M c ont) 
nOutg oing  Glare Guard : 1200 ms (E&M dis)
nOutg oing  Dial Pulse Rate (PPS): 10 p p s
nOutg oing  Rotary Dig it Dial Make: 40 ms
    All Lucent Technologies manuals Comments (0)

    Related Manuals for Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual