Home
>
Lucent Technologies
>
Communications System
>
Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual
Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual
Have a look at the manual Lucent Technologies DEFINITY Enterprise Communications Server Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 413 Lucent Technologies manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
413 South Africa
change trunk-group 3 Page 1 of 10
TRUNK GROUP
Group Number: 3 Group Type: did CDR Reports: n
Group Name: MFC-R2 COR: 1 TAC: 32
Country: 8
Auth Code? n
Prefix-1? n Trunk Flash? n Toll Restricted? n
TRUNK PARAMETERS
Trunk Type: immed-start Incoming Rotary Timeout (sec): 5
Incoming Dial Type: mf
Trunk Termination: rc Disconnect Timing(msec): 500
Digit Treatment: Digits:
Expected Digits: 4 Sig Bit Inversion: none
Terminal Balanced? n RA Trunk Loss: 2db
Extended Loop Range? n Trunk Gain: low Drop Treatment: silence
Disconnect Supervision - In? y
change trunk-group 3 Page 2 of 10
TRUNK FEATURES
ACA Assignment? n Measured: none
Maintenance Tests? y
Data Restriction? n
Suppress # Outpulsing? n
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
414 South Africa
nMFC-R2 Outg oing
change trunk-group 3 Page 3 of 10
TRUNK GROUP
ADMINISTRABLE TIMERS
Incoming Disconnect(msec): 500
Incoming Dial Guard (msec): 70
Flash Length (msec): 540 Incoming Incomplete Dial Alarm (sec): 255
END TO END SIGNALING
Tone(msec): 350 Pause(msec): 150
change trunk-group 5 Page 1 of 10
TRUNK GROUP
Group Number: 5 Group Type: diod CDR Reports: y
Group Name: outgoing mfc COR: 1 TAC: 35
Direction: two-way Outgoing Display? n Trunk Signaling Type:
Dial Access? y Busy Threshold: 99 Night Service:
Queue Length: 0 Country: 8
Auth Code? n Digit Absorption List:
Prefix-1? y Trunk Flash? n Toll Restricted? y
TRUNK PARAMETERS
Trunk Type : immed-start
Outgoing Dial Type: mf Incoming Dial Type: mf
Trunk Termination: rc
Digit Treatment: Digits:
Expected Digits: 4 Sig Bit Inversion: none
Terminal Balanced? n RA Trunk Loss: 0db
Trunk Gain: low Drop Treatment: silence
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 10 Receive Answer Supervision? n
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
415 South Africa
nA-Bit E1 Trunk for Transtel
change trunk-group 5 Page 2 of 10
TRUNK FEATURES
ACA Assignment? n Measured: none
Maintenance Tests? y
Data Restriction? n
Suppress # Outpulsing? n
change trunk-group 5 Page 3 of 10
TRUNK GROUP
ADMINISTRABLE TIMERS
Incoming Disconnect(msec): 500 Outgoing Disconnect(msec): 500
Incoming Dial Guard (msec): 70 Outgoing Dial Guard(msec): 1600
Incoming Glare Guard (msec): 1500 Outgoing Glare Guard(msec): 1500
Ringing Monitor (msec): 5200 Incoming Seizure (msec): 500
Outgoing End of Dial(sec): 10 Outgoing Seizure Response (msec): 5
Programmed Dial Pause(msec): 1500
Flash Length (msec): 5 Incoming Incomplete Dial Alarm (sec): 255
END TO END SIGNALING
Tone(msec): 350 Pause(msec): 150
OUTPULSING INFORMATION
PPS: 10 Make(msec): 35 Break(msec): 65 PPM? n
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
416 South Africa
change trunk-group 6 Page 1 of 10
TRUNK GROUP
Group Number: 6 Group Type: tie CDR Reports: y
Group Name: a bit COR: 1 TAC: 36
Direction: two-way Outgoing Display? n Trunk Signaling Type:
Dial Access? y Busy Threshold: 99 Night Service:
Queue Length: 0 Incoming Destination:
Comm Type: voice Auth Code? n
TRUNK PARAMETERS
Trunk Type (in/out): immed/immed Incoming Rotary Timeout (sec): 5
Outgoing Dial Type: tone Incoming Dial Type: tone
Disconnect Timing(msec): 500
Digit Treatment: Digits:
Sig Bit Inversion: none
Connected to Toll? n STT Loss: normal DTT to DCO Loss: normal
Incoming Dial Tone? n
Disconnect Supervision - In? y Out? n
Answer Supervision Timeout: 10 Receive Answer Supervision? n
change trunk-group 6 Page 2 of 10
TRUNK FEATURES
ACA Assignment? n Measured: none
Internal Alert? n Maintenance Tests? y
Data Restriction? n
Used for DCS? n
Suppress # Outpulsing? n
Seize When Maintenance Busy: neither-end
DEFINITY® Enterprise Communications Server Application Notes
for Type Approval Issue 1
June 1999
Application Notes for Type Approval
417 South Africa
Station Administration
The ad ministrator c an selec t user-d efined on station administration and
attend ant ad ministration to pic k a display lang uag e for the c orresp ond ing
d isp lay set user.
n603/302B1 Terminal Parameters
— Default Parameter Set: 13
— Customize Parameters: Y
— Primary Levels:
nVoic e Transmit (d B): + 13.0
nVoic e Sid etone (d B): -21.5
nVoice Receive (dB): -8.5
n8434 Terminal Parameters
— Default Parameter Set: 13
— Customize Parameters: Y
— Primary Levels:
nVoic e Transmit (d B): + 12.0
nVoic e Sid etone (d B): -5.0
nVoice Receive (dB): -11.5
change trunk-group 6 Page 3 of 10
TRUNK GROUP
ADMINISTRABLE TIMERS
Incoming Disconnect(msec): 500 Outgoing Disconnect(msec): 500
Incoming Dial Guard (msec): 70 Outgoing Dial Guard(msec): 1600
Incoming Glare Guard (msec): 1500 Outgoing Glare Guard(msec): 1500
Outgoing End of Dial(sec): 10 Outgoing Seizure Response(sec): 5
Programmed Dial Pause(msec): 1500 Disconnect Signal Error (sec): 240
Incoming Incomplete Dial Alarm (sec): 255
END TO END SIGNALING
Tone(msec): 350 Pause(msec): 150
OUTPULSING INFORMATION
PPS: 10 Make(msec): 40 Break(msec): 60
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 418 South Africa n8403/8410 Terminal Parameters — Default Parameter Set: 13 — Customize Parameters: Y — Primary Levels: nVoice Transmit (dB): + 9.0 nVoic e Sid etone (d B): -5.0 nVoice Receive (dB): -11.5
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 419 Spain Spain Ta b l e 5 4 shows the rec ommended c irc uit p ac ks. Table 54. Recommended and Available CPs in Spain Equipment Equipment Type Cab inet Typ e & Power GAC-MCC DC-MCC AC-SCC AC-CSCC AC-CMC AC Power Voltag e & Freq 220V/50Hz Ring Generator 25Hz Tone Detec tor > TN2182B > TN744D TN420C Tone Cloc k > TN2182B TN780 R2MFC Circ uit > TN744D TN744Bv2 Speech Synthesizer > TN457 Call Classifier > TN744D Announc ement TN750C TN750B Analog DID Trunk n/a Analog CO Trunk (No PPM) > TN2147C Analog CO Trunk (w/PPM) > TN465C TN465B 4 Wire Tie Trunk n/a 2 Wire Tie Trunk n/a Auxiliary Trunk > TN763D Dig ital CO/DID Trunk > TN464F TN464E D i g i t a l Ti e Tr u n k n / a Dig ital PRI CO Trunk > TN464F TN464E Dig ital BRI Trunk > TN2185 Dig ital Converter PRI-DASS Dig ital Converter PRI-DPNSS Dig ital Converter PRI-BRI 8 Port Analog Line n/a 16 Port Analog Line #TN2183 > TN2180 24 Port Analog Line n/a Continued on next page
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 420 Spain Country-Specific Features When the Country Code is 11, the Pub lic Network Call Priority feature (Multifreq uenc y Esp ana (MFE) Sig naling ) c an b e ad ministered on CO and DID trunk g roup s. See “ Pub lic Network Call Priority” feature for information ab out Call Retention and Re-ring in the DEFINITY ECS Ad ministration and Feature Desc rip tion. You c an also use the Europ ean CEPT Ad vic e of Charg e feature in Sp ain. See DEFINITY ECS Administration and Feature Desc rip tion for more information on Ad vic e of Charg e. Feature Administration The sc reen d isp lays shown in this sec tion were effec tive the d ate the typ e ap p roval was award ed . The sc reens may have c hang ed sinc e that d ate. Only those feature-related p arameters that may have a Typ e Ap p roval or b asic c onnec tivity imp lic ation for a p artic ular c ountry are listed here. System Parameter Administration Only those feature-related p arameters that may have a Typ e Ap p roval or b asic c onnec tivity imp lic ation for a p artic ular c ountry are listed here. nSystem Parameters Customer Op tions —ARS: y — Multifreq uenc y Sig naling : y n Feature-Related System Parameters Ad ministration — Trunk-to-Trunk Transfer: y 4 Wire Digital Line > TN754B 2 Wire Digital Line #TN2224 > TN2181 Data Line > TN726B BRI-U Line BRI-ST Line Ta b l e 5 4 .Recommended and Available CPs in Spain — Continued Equipment Equipment Type Continued on next page
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 421 Spain — Off-Premises Tone Detec t Timeout Interval (sec ): 10 — DID/Tie/ISDN Interc ep t Treatment: attd — Pub lic Network Trunks on Conferenc e Call: 5 — Conferenc e Parties With PNTs: 6 — Conferenc e Parties Without PNTs: 6 — Nig ht Servic e Disc onnec t Timer (sec ): 180 — Short Interd ig it Timer (sec ): 3 — Line Interc ep t Tone Timer (sec ): 30 — Auto-Start: n —Auto-Hold: y — Attend ant Tone: y — Bridg ing Tone: y — Conferenc e Tone: y — Intrusion Tone: y — DID Busy Treatment: attend ant — Pull Transfer: No — Distinc tive Aud ib le Alerting : nInternal: 1 External: 2 Priority: 3 — Level of Tone Detec tion: prec ise — Wait Answer Sup ervision Timer: y — Rep etitive Call Waiting Tone: y — Outp ulse Without Tone: n — Network Feed b ac k During Tone Detec tion: y — Interc ept Treatment On Failed Trunk Transfers: n — Rec all Timing (Switc hhook Flash and Rec all Button): n Flashhook Interval: y n Up p er Bound (msec ): 1020 n Lower Bound (msec ): 150 — Rec all Timing (Button Only): nFlashhook Interval: y nUp p er Bound (msec ): 160 nLower Bound (msec ): 150
DEFINITY® Enterprise Communications Server Application Notes for Type Approval Issue 1 June 1999 Application Notes for Type Approval 422 Spain n System Parameter Country Op tions — Comp and ing Mode: A-law — Base Tone Generation Set: 11 — 440Hz PBX-d ial Tone: n — 440Hz Sec ond ary-dial Tone: n — Dig ital Loss Plan: 11 — Analog Line Transmission: 11 — Analog Ring ing Cad enc e: 11 — Tone Detec tion Mod e: 4 — Dial Tone Valid ation Timer (msec ): 1000 — Interd ig it Pause: long [ (Freq uenc y/Level)|silenc e|g oto)] [ (Duration ms)|(Step)] — Ringback Tone: n(425/-4.0)(1500msec ) n(silenc e)(3000msec ) n(goto)(1) — Busy Tone: n(425/-4.0)(200msec ) n(silenc e)(5000msec ) n(goto)(1) — Reord er Tone: n(425/-4.0)(200msec ) n(silenc e)(200msec ) n(425/-4).0(200msec ) n(silenc e)(200msec ) n(425/-4.0)(200msec ) n(silenc e)(600msec ) n(goto)(1) — Interc ept Tone: n(425/-4.0)(200msec ) n(silenc e)(200msec ) n(425/-4.0)(200msec ) n(silenc e)(600msec )