Konica Minolta bizhub C451 User Manual

							Saving documents2
C4512-56
4Select the width of the area to be erased.
– To use frame erasing, touch [Yes].
– To erase the same width on all sides, touch [Frame], and then spec-
ify a value.
– To specify different widths for the top, left, right and bottom, touch 
the button for the desired location, and then specify a value. To 
cancel frame erasing, touch [None].
– On the North American (inch) model:
– On the European (metric) model:
5Touch [OK], and then touch [OK] in the next two screens that appear.
Downloaded From ManualsPrinter.com Manuals 
						

							Saving documents2
C4512-57 Book Copy (Book Scan)
Select the method for scanning page spreads. The following four scanning 
methods are available. In addition, the binding position and erase settings 
can be specified.
2
Note 
Specify the size of the page spread as the scan size.
The document can be scanned while erasing the shadows typical for page 
spreads.
2
Note 
If a width to be erased around the document is specified with “Frame 
Erase” with the “Book Copy” function, the same settings are also applied 
on the Frame Erase screen (displayed from the Erase screen).
1In the Save Document screen, touch [Scan Settings].
SettingDescription
Book Spread Select this setting to scan a page spread as a single page.
Separation Select this setting to scan a page spread as two separate pages (left 
and right).
Front Cover Select this setting to scan the first page as the front cover.
Front + Back Covers Select this setting to scan the first page as the front cover, the sec-
ond page as the back cover, and the remaining pages as the body.
ParameterDescription
Frame  Erase An area around the edge of the document can be erased. Areas with 
a width between 1/16 and 2 inches on the North American (inch) 
model (between 0.1 and 50.0 mm on the European (metric) model) 
can be specified separately for the left and right sides and the top 
and bottom.
Center Erase An area along the center of the document can be erased. An area 
with a width between 1/16 and 1-3/16 inches on the North American 
(inch) model (between 0.1 and 30.0 mm on the European (metric) 
model) can be specified.
Downloaded From ManualsPrinter.com Manuals 
						

							Saving documents2
C4512-58
2Touch [Book Scan].
3Touch [Book Copy].
4Specify the settings for the “Book Copy” function.
Downloaded From ManualsPrinter.com Manuals 
						

							Saving documents2
C4512-59 – If “Separation”, “Front Cover” or “Front + Back Covers” was select-
ed, touch [Binding Position], and then select the binding position.
5Touch [OK], and then touch [OK] in the next two screens that appear.
Scan Size (Application)
Select the size of paper that is to be scanned.
The following Scan Size settings are available.
2
Note 
If the “Book Copy” function was set, specify the size of the page spread.
1In the Save Document screen, touch [Scan Settings].
SettingDescription
Auto Select this setting to detect the size of the first page in the loaded 
document.
Standard sizes Select a preset paper size (such as A4 or B5) and orientation.
Custom  Size Type in the dimensions of a custom size that is not available as a pre-
set size. The size in the X direction can be set between 2 and 17 
inches on the North American (inch) model (30.0 and 432.0 mm on 
the European (metric) model), and the size in the Y direction can be 
set between 2 and 17 inches on the North American (inch) model 
(30.0 and 297.0 mm on the European (metric) model).
Photo Size On the North American (inch) model, 3 × 5 or 2-1/4 × 3-1/4 can be 
selected.
On the European (metric) model, 13 × 18, 10 × 15 or 9 × 13 can be 
selected.
Downloaded From ManualsPrinter.com Manuals 
						

							Saving documents2
C4512-60
2Touch [Application].
3Touch [Scan Size].
4Select the desired size and orientation.
– On the North American (inch) model:
Downloaded From ManualsPrinter.com Manuals 
						

							Saving documents2
C4512-61 – On the European (metric) model:
– Select the orientation and size of the paper to be scanned.
– Touching [Custom Size] displays the Custom Size screen. Use the 
keypad to type in the size, and then touch [OK].
– The values can be specified in 1/16-inch increments on the North 
American (inch) model (in 0.1 mm increments on the European 
(metric) model).
– On the North American (inch) model:
Downloaded From ManualsPrinter.com Manuals 
						

							Saving documents2
C4512-62 – On the European (metric) model:
– Touching [Photo Size] displays the Photo Size screen. Select the 
orientation and size of the photo to be scanned, and then touch 
[OK].
– On the North American (inch) model:
– On the European (metric) model:
5Touch [OK], and then touch [OK] in the next two screens that appear.
Downloaded From ManualsPrinter.com Manuals 
						

							Saving documents2
C4512-63 Original Settings
Specify the type of document that is loaded, for example, if it contains mixed 
page sizes or is folded in a zigzag.
2
Note 
The original settings and direction settings can be used together.
1In the Save Document screen, touch [Original Settings].
2Select settings for the Original Settings functions.
ParameterDescription
Mixed  Original Select this setting when documents of different sizes are loaded into 
the ADF (optional). The scan speed is decreased since the size of 
each page is detected before it is scanned.
Z-Folded Original Select this setting to detect the size of a zigzag-folded document by 
the length fed through the ADF.
Long Original Select this setting for documents that are longer than the standard 
size.
Original Direction Select the orientation of the document. After the document is 
scanned, the data is processed so that it is correctly oriented.
Binding Position Select the binding position, such as when holes are punched in the 
document or the document is stapled.
This adjusts the scan of double-sided documents so that the binding 
position is not reversed.
Left Select this setting for a document with binding on the left side.
Top Select this setting for a document with binding at the top.
Auto: The binding is on the long side if the page is 297 mm or less, 
or it is on the short side if the page is more than 297 mm.
Despeckle Select this setting to reduce the effect that dust on the left partition 
glass has on images when the document is loaded into the ADF.
Downloaded From ManualsPrinter.com Manuals 
						

							Saving documents2
C4512-64 – Touching [Original Direction] displays the Original Direction screen. 
Touch the button for the desired orientation, and then touch [OK].
– Touching [Binding Position] displays the Binding Position screen. 
Touch the button for the binding position, and then touch [OK].
– To apply the “Despeckle” setting, touch [Despeckle] to select it.
3Touch [OK], and then touch [OK] in the next screen that appears.
Downloaded From ManualsPrinter.com Manuals 
						

							Saving documents2
C4512-65
!
Detail 
The scanning speed will be reduced if the “Despeckle” setting is select-
ed.
Clean the left partition glass when it becomes extremely dirty. For details, 
refer to the User’s Guide [Copy Operations].
Downloaded From ManualsPrinter.com Manuals