Konica Minolta bizhub C360 User Manual

							bizhub C360/C280/C2204-7
4.4 Using the Web service4
Installation procedure
1From the [Start] button, select [Network].
Devices connected to the network appear.
2Right-click the scanner icon representing this machine, and select [Install].
%Depending on the settings on the computer, the UAC (User Account Control) dialog box may ap-
pear. Check the details, and continue.
%If both of the scan and printer functions of the Web service are enabled on the machine, the machine 
is represented by the printer icon.
%The driver software is automatically installed. When the confirmation dialog box appear, click 
[Close].
3Select [Web Service] on the control panel of this machine, to ensure that the connection to the compu-
ter is established.
Downloaded From ManualsPrinter.com Manuals 
						

							5Sending
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C360/C280/C2205-2
5.1 Operation flow5
5Sending
This section describes the procedure for sending fax and scanned data, and available functions.
5.1 Operation flow
5.1.1 Scan/Network Fax
The following describes the operation flow for sending scanned data and for using Network Fax function.
Press Fax/Scan.
Specify the destination
Address Book (p. 5-20) Direct Input (p. 5-25)Job History (p. 5-32) Address Search (p. 5-33)
Configure Scan Settings (p. 5-36), Original Set-
tings (p. 5-55) and Communication Settings 
(p. 5-58).
Load the original
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C360/C280/C2205-3
5.1 Operation flow5
Reference
-If the optional Security Kit SC-507 is installed, and [Security Details] − [Password Copy] is set to [Yes] 
in Administrator Settings, when scanning an original with a password embedded, a message prompting 
you to enter a password appears. Press [Password], enter the password, and then press [OK]. On the 
screen that reappears, press [Begin Authentication] to start sending.
-If the optional Security Kit SC-507 is installed, and [Security Details] − [Copy Guard] is set to [Yes] in 
Administrator Settings, you cannot send an original with copy guard patterns embedded. To check the advanced preview, press Proof 
Copy.(p. 5-9)
Press Start.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C360/C280/C2205-4
5.1 Operation flow5
5.1.2 G3 fax
The following describes the operation flow for using G3 fax function.
Press Fax/Scan.
Specify the destination
Address Book (p. 5-20) Direct Input (p. 5-25) Job History (p. 5-32)
Configure Scan Settings (p. 5-36), Original Set-
tings (p. 5-55) and Communication Settings 
(p. 5-58).
Load the original
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C360/C280/C2205-5
5.1 Operation flow5
Reference
-If the optional Security Kit SC-507 is installed, and [Security Details] − [Password Copy] is set to [Yes] 
in Administrator Settings, when scanning an original with a password embedded, a message prompting 
you to enter a password appears. Press [Password], enter the password, and then press [OK]. On the 
screen that reappears, press [Begin Authentication] to start sending.
-If the optional Security Kit SC-507 is installed, and [Security Details] − [Copy Guard] is set to [Yes] in 
Administrator Settings, you cannot send an original with copy guard patterns embedded.
5.1.3 Recalling a program
The following describes the procedure to use the scan/fax program. To check the advanced preview, press Proof 
Copy.(p. 5-9)
Press Start .
Press Fax/Scan.
Press Mode Memory.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C360/C280/C2205-6
5.1 Operation flow5
Select a program, and press [OK].
Configure Scan Settings (p. 5-36), Original Set-
tings (p. 5-55) and Communication Settings 
(p. 5-58).
Load the original
To check the advanced preview, press Proof 
Copy.(p. 5-9)
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C360/C280/C2205-7
5.1 Operation flow5
Reference
-If the optional Security Kit SC-507 is installed, and [Security Details] − [Password Copy] is set to [Yes] 
in Administrator Settings, when scanning an original with a password embedded, a message prompting 
you to enter a password appears. Press [Password], enter the password, and then press [OK]. On the 
screen that reappears, press [Begin Authentication] to start sending.
-If the optional Security Kit SC-507 is installed, and [Security Details] − [Copy Guard] is set to [Yes] in 
Administrator Settings, you cannot send an original with copy guard patterns embedded.
dReference
For the description and procedure on registering a program, refer to page 9-20.
5.1.4 Broadcasting
The following describes the procedure for sending a fax to multiple destinations simultaneously. Press Start.
Press Fax/Scan.
Specify multiple destinations.
Address Book (p. 5-20) Direct Input (p. 5-25)Job History (p. 5-32) Address Search (p. 5-33)
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C360/C280/C2205-8
5.1 Operation flow5
Reference
-If the optional Security Kit SC-507 is installed, and [Security Details] − [Password Copy] is set to [Yes] 
in Administrator Settings, when scanning an original with a password embedded, a message prompting 
you to enter a password appears. Press [Password], enter the password, and then press [OK]. On the 
screen that reappears, press [Begin Authentication] to start sending.
-If the optional Security Kit SC-507 is installed, and [Security Details] − [Copy Guard] is set to [Yes] in 
Administrator Settings, you cannot send an original with copy guard patterns embedded. Configure Scan Settings (p. 5-36), Original Set-
tings (p. 5-55) and Communication Settings 
(p. 5-58).
Load the original
To check the advanced preview, press Proof 
Copy.(p. 5-9)
Press Start.
Downloaded From ManualsPrinter.com Manuals 
						

							bizhub C360/C280/C2205-9
5.2 Using the advanced preview5
5.2 Using the advanced preview
Loading the original in the fax or scan mode and entering the address allows you to preview the finishing im-
age on the control panel by pressing Proof Copy. In the Preview screen, the orientation of the scanned orig-
inal can be checked or the settings can be changed.
Reference
-If Encryption is selected, you cannot display the preview image.
5.2.1 Preview screen
Preview - View Pages
Displays the scanned image.
Item Description
[Previous Page]/[Next Page] If the saved document contains multiple pages, 
use these buttons to switch the display to another 
page.
[Zoom] Press either of [ ]/[ ] to change the display size 
to check the details of the document. Each time 
pressing [ ], the display size changes to 2 times, 
4 times and 8 times of the full size display in this or-
der. In the enlarged display mode, use the scroll 
bars located in the right and the bottom of the im-
age to view to the desired portion of the document.
Downloaded From ManualsPrinter.com Manuals