HP LaserJet M3035xs MFP User Manual

							Acoustic emissions
Table C-5  Sound power and pressure level1,2
Sound power levelDeclared per ISO 9296
Printing3LWAd= 6.5 Bels (A) [65 dB(A)]
ReadyEssentially Inaudible
Sound pressure levelDeclared per ISO 9296
Printing3LpAm=56 dB (A)
ReadyEssentially Inaudible
1Values subject to change. See www.hp.com/support/LJM3027mfp  or www.hp.com/support/LJM3035mfp for current
information.
2Configuration tested: base printer, simplex printing with A4 paper size.3Print speed is 27 or 35 ppm.
Operating environment
Table C-6   Necessary conditions
Environmental condition PrintingStorage/standby
Temperature (printer and print cartridge)15° to 32.5°C (59° to 89°F)0° to 40°C (32° to 104°F)
Relative humidity 10% to 80% 0% to 95%
ENWW Acoustic emissions 219
 
						

							220 Appendix C   Specifications ENWW
 
						

							D Regulatory information
This section contains the following regulatory information:
●
FCC regulations
●
Environmental product stewardship program
●
Telecom statement
●
Declaration of conformity
●
Safety statements
ENWW 221
 
						

							FCC regulations
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy. If this equipment is not installed a nd used in accordance with the instructions, it may
cause harmful interference to radio communications.  However, there is no guarantee that interference
will not occur in a particular insta llation. If this equipment does caus e harmful interference to radio or
television reception, which can be determined  by turning the equipment off and on, the user is
encouraged to try to correct the interference  by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase separation between equipment and receiver.
● Connect equipment to an outlet on a circuit differen
t from that to which the receiver is located.
● Consult your dealer or an experienced radio/TV technician.
NOTE
Any changes or modifications to the printer th at are not expressly approved by HP could
void the user’s authority  to operate this equipment.
Use of a shielded interface cable is required to co mply with the Class A limits of Part 15 of FCC
rules.
222 Appendix D   Regulatory information ENWW
 
						

							Environmental product stewardship program
Protecting the environment
Hewlett-Packard Company is committed to providing quality products in an environmentally sound
manner. This product has been designed with several a ttributes to minimize impacts on our environment.
Ozone production
This product generates no appreciable ozone gas (O3).
Power consumption
Power usage drops significantly while in Ready and Sleep modes, which saves natural resources and
saves money without affecting the high performance of this product. This product qualifies for ENERGY
STAR® (Version 3.0), which is a voluntary program to encourage the development of energy-efficient
office products.
ENERGY STAR® and the ENERGY STAR mark are U.S. registered marks. As an ENERGY STAR
partner, Hewlett-Packard Company has determined  that this product meets ENERGY STAR Guidelines
for energy efficiency. For more information, see 
www.energystar.gov .
Toner consumption
Economode uses significantly less toner, whic h might extend the life of the print cartridge.
Paper use
This product’s manual/optional automatic duplex feature (two-sided printing, see Print on both sides of
the paper (Windows) or Printing on both sides of the paper  (Mac)) and N-up printing (multiple pages
printed on one page ) capability can reduce paper usage  and the resulting demands on natural
resources.
Plastics
Plastic parts over 25 grams are marked according to  international standards that enhance the ability to
identify plastics for recycling purpos es at the end of the product’s life.
HP LaserJet print supplies
It’s easy to return and recycle your empty HP LaserJ et print cartridges—free of charge—with HP Planet
Partners. HP is committed to pr oviding inventive, high-quality pr oducts and services that are
environmentally sound, from product design and ma nufacturing to distribution, operation and recycling
processes. We ensure your returned HP LaserJet  print cartridges are recycled properly, processing
them to recover valuable plastics an d metals for new products and diverting millions of tons of waste
from landfills. Since this cartridg e is being recycled and used in new ma terials, it will not be returned to
ENWW Environmental product stewardship program 223
 
						

							you. Your empty HP LaserJet print cartridges are recycled responsibly when you participate in the
HP Planet Partners program. Thank you for being environmentally responsible!
In many countries/regions, this product’s printing supplies (for example, print cartridges) can be returned
to HP through the HP Printing  Supplies Returns and Recycling Program. An easy-to-use and free take
back program is available in more than 35 countr ies/regions. Multilingual program information and
instructions are included in every new HP  LaserJet print cartridge and supplies package.
HP print supplies returns and recycling program information
Since 1992, HP has offered HP LaserJet supplies retu rn and recycling free of charge. In 2004, HP Planet
Partners for LaserJet Supplies was available in 85 % of the world market where HP LaserJet supplies
are sold. Postage-paid and pre-addressed labels are included within the instruction guide in most
HP LaserJet print cartridge boxes. Labels and bulk  boxes are also available through the Web site:
www.hp.com/recycle.
Use the label to return empty, original HP LaserJet pr int cartridges only. Please do not use this label for
non-HP cartridges, refilled or rem anufactured cartridges, or warranty re turns. Printing supplies or other
objects inadvertently sent to the HP Planet Partners program cannot be returned.
More than 10 million HP LaserJet  print cartridges were recycled globally in 2004  through the HP Planet
Partners supplies recycling  program. This record number represents  26 million pounds of print cartridge
materials diverted from landfills.  Worldwide, in 2004, HP recycled  an average of 59% of the print
cartridge by weight consisting primarily of plastic  and metals. Plastics and metals are used to make new
products such as HP products, plastic trays, and sp ools. The remaining materials are disposed of in an
environmentally responsible manner.
● U.S. returns.
 For a more environmentally responsible re turn of used cartridges and supplies, HP
encourages the use of bulk retu rns. Simply bundle two or more cartridges together and use the
single, pre-paid, pre-addressed UPS label that is  supplied in the package. For more information in
the U.S., call 1-800-340-2445 or visit the HP Web site at 
www.hp.com/recycle .
● Non-U.S. returns.
 Non-U.S. customers should visit the 
www.hp.com/recycle Web site for further
information regarding availability of the  HP Supplies Returns and Recycling Program.
Paper
This product is capable of using recycled papers w hen the paper meets the guidelines outlined in the
HP LaserJet Printer Family Print Media Guide . This product is suitable for the use of recycled paper
according to EN12281:2002.
Material restrictions
This HP product contains mercury in the fluorescent lamp of the scanner and/or control panel liquid
crystal display that may require  special handling at end-of-life.
This HP product contains a battery that might require special handling at end-of-life. The batteries
contained in or supplied by Hewlett-Packard for this product include the following:
HP LaserJet M3027/M3035 device
TypeCarbon monofluoride lithium battery BR1632
Weight(1.5 g)
224 Appendix D   Regulatory information ENWW
 
						

							HP LaserJet M3027/M3035 device
LocationOn formatter board
User-removableNo
For recycling information, you can go to www.hp.com/recycle, or contact your local authorities or the
Electronics Industries Alliance: 
www.eiae.org .
Disposal of waste equipment by us ers in private households in the
European Union
This symbol on the product or on its packaging indica tes that this product must not be disposed of with
your other household waste. Instead, it is your re sponsibility to dispose of your waste equipment by
handing it over to a designated collection point for  the recycling of waste electrical and electronic
equipment. The separate collection and recycling of  your waste equipment at the time of disposal will
help to conserve natural resources and ensure that it  is recycled in a manner that protects human health
and the environment. For more information about  where you can drop off your waste equipment for
recycling, please contact your local  city office, your household waste disposal service or the shop where
you purchased the product.
Material Safety Data Sheet (MSDS)
Material Safety Data Sheets (MSD S) for supplies containing chemical substances (for example, toner)
can be obtained by contacting the HP Web site at 
www.hp.com/go/msds  or www.hp.com/hpinfo/
community/environment/productinfo/safety .
For more information
To obtain information about these environmental topics:
●Product environmental profile sheet fo
r this and many related HP products
● HP’s commitment to the environment
ENWW Environmental product stewardship program 225
 
						

							●HP’s environmental management system
● HP’s end-of-life pr
oduct return and recycling program
● Material Safety Data Sheets
Visit 
www.hp.com/go/environment  or www.hp.com/hpinfo/community/environment/productinfo/safety .
226 Appendix D   Regulatory information ENWW
 
						

							Telecom statement
The HP LaserJet M3027x and HP LaserJet M3035xs models have the HP LaserJet Analog Fax
Accessory 300 already installed to provide communi cation to the public switch telephone network
(PSTN) for fax functionality. See the  HP LaserJet Analog Fax Accessory 300 User Guide  for all
regulatory approval information and regulatory notic es associated with the fax functionality and that
device.
ENWW Telecom statement 227
 
						

							Declaration of conformity
Declaration of Conformity
according to ISO/IEC Guide 22 and EN 45014
Manufacturers Name:Hewlett-Packard Company
Manufacturers Address: 11311 Chinden Boulevard,
Boise, Idaho 83714-1021, USA
declares, that the product
Product Name: HP LaserJet M3027 / M3035 Series
Accessories
5): Q7817A – Optional 1x500 Sheet Tray
BOISB-0308-00 – Fax module
Regulatory Model Number
3): BOISB-0406-01
Product Options: ALL
Print Cartridge: Q7551A, Q7551X
conforms to the following Product Specifications:
Safety: IEC 60950-1:2001 / EN60950-1: 2001 +A11 IEC 60825-1:1993 +A1 +A2 / EN 60825-1:1994 +A1 +A2 (Class 1 Laser/LED Product)
GB4943-2001
EMC: CISPR 22:1993 +A1 +A2 / EN 55022:1994 +A1 +A2 - Class A
1,4)
EN 61000-3-2:2000
EN 61000-3-3:1995 +A1
EN 55024:1998 +A1 +A2
FCC Title 47 CFR, Part 15 Class A
2) / ICES-003, Issue 4
TELECOM: TBR-21:1998; EG 201 121:1998
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 89/336/EEC, the Low Voltage Directive 73/23/EEC, the R &TTE
Directive 1999/5/EC (Annex II), and carries the CE-Marking accordingly.
1) The product was tested in a typical configurati on with Hewlett-Packard Personal Computer Systems.
2) This Device complies with Part 15 of the FCC Rules. Operat ion is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interf erence received, including interference that may cause undesire d operation.
3) For regulatory purposes, this product  is assigned a Regulatory model number. This  number should not be confused with the marketing
name or the product number(s).
4) The product meets the requirements of EN55022 & CNS13438 Class A in which case the following applies: “Warning – This is a c lass A
product. In a domestic environment this product may cause radio in terference in which case the user may be required to take adequate
measures”.
5) All worldwide modular approvals for analog fax accessory obtai ned by Hewlett-Packard under the regulatory model number BOISB -0308-00
incorporate the Multi-Tech Systems MT5634SMI Socket Modem Module.
Boise, Idaho , USA
19 April, 2006
For regulatory topics only:
Australia Contact: Product Regulations Manager, Hewlett-Packard Aust ralia Ltd., 31-41 Joseph Street, Blackburn, Victoria 3130, Australia
European Contact: Your Local Hewlett-Packard Sales and Service  Office or Hewlett-Packard GmbH, Department HQ-TRE / Standards
Europe, Herrenberger Strasse 140, , D-71034, Böblingen, (FAX: +49-7031-14-3143)
USA  Contact: Product Regulations Manager, Hewlett-Packard Company ,, PO Box 15, Mail Stop 160, Boise, ID 83707-0015, , (Phone:
208-396-6000)
228 Appendix D   Regulatory information ENWW