HP CM8060 User Manual

							
Electrical specifications
WARNING!Power requirements are based on the country/r egion where the device is installed. Do
not convert operating voltages, which could damage the device.
Table A-3   Electrical specifications
Power requirements 110–127 VAC nominal (+6%, -10%), 20 A, 50–60 Hz
120 V~ 16 A, 60 Hz
200–240 VAC nominal (+6%, -10%), 10 A, 50–60 Hz (USA and Canada)
NOTE: Connect only to a dedicated circuit.
Table A-4   Power consumption (average, in watts)1
ModelActive2Sleep
HP CM8060 Color MFP with Edgeline Technology1,200 W48 W
HP CM8050 Color MFP with Edgeline Technology 1,200 W 48 W
1Values subject to change. See www.hp.com/support/CM8060edgeline  or www.hp.com/support/CM8050edgeline for current
information.
2Power reported is highest values measured for color and  monochrome printing/copying using all standard voltages.
ENWW Electrical specifications 257
 
						

							
Acoustic specifications
Table A-5  Acoustic emissions
Sound Power LevelDeclared per ISO 9296
Printing/CopyingLWAd = 7.3 Bels (A) [73 dB(A)]
ReadyLWAd = 5.2 Bels (A) [52 dB(A)]
Sound Pressure Level (bystander position)Declared per ISO 9296
Printing/CopyingLpAm = 57 dB(A)
Ready LpAm = 33 dB(A)
1Values subject to change. See www.hp.com/support/CM8060edgeline  or www.hp.com/support/CM8050edgeline for current
information.
258 Appendix A   Specifications ENWW
 
						

							
Environmental specifications
ConditionRecommended for
operatingMaximum for operatingStorage
Temperature15 to 25°C (59 to 77°F)10 to 30°C (50 to 86°F)-40 to 60°C (-40 to 140°F)
Humidity 40 to 55% RH, non-condensing20 to 80% RH, non-
condensingless than 90% RH, non-
condensing
ENWW Environmental specifications 259
 
						

							
260 Appendix A   Specifications ENWW
 
						

							
B Worksheets
Print the pages in this appendix, and fill in the information for your reference.
●
HP Support information sheet
●
Digital-send setup worksheet
●
Security configuration checklist
ENWW 261
 
						

							
HP Support information sheet
Table B-1  HP Support information sheet
HP sales representative name 
HP sales representative phone number 
HP-authorized support representative name 
HP-authorized support representative phone number 
262 Appendix B   Worksheets ENWW
 
						

							
Digital-send setup worksheet
If you would like the HP-authorized support representative to assist you with setting up the digital-send
features, print these pages, fill out the information, and give them to the representative. To find some
information, you might need to contact other administrators within your organization.
If you set up the digital-send features without the he lp of the HP-authorized support representative, you
can use this page to record the necessary information for setting up these features.
NOTE: The HP-authorized support representative is no t responsible for resolving problems if the
information you provide is incorrect.
Table B-2   Digital-send setup worksheet
Security setup
Indicate the option that applies to your
system. This refers to setting up which
users have access to the device.Minimum Security
The device does not track users or where
jobs are sent. 
Custom Access Control
Local security. You will configure
usernames and passwords for people
who are allowed to use the device or
certain device features. Users must sign
in to the device before using it or before
using certain features. 
Maximum Security
Integration with Microsofts Active
Directory. The device uses the Active
Directory to authenticate all users. 
Send to E-mail
If you want the HP-authorized support
representative to assist you with setting
up this feature, provide the information in
this section.
Contact the administrator for the SMTP
server if you need to find this information.What is the host name of the SMTP
server? 
Do you want all e-mails sent from the
device to use the same “From” address?
What is the “send from address” friendly
name?
If so, what is that address? 
Does the SMTP server require
authentication?
If so, what is the username and
password for the SMTP server? 
Send to Folder
If you want the HP-authorized support
representative to assist you with setting
up this feature, provide the information in
this section.
Contact the network administrator for
your organization if you need to find this
information. The network administrator
might need to create a shared directory
for this feature.What are the share names for the first,
second, and third folders where scanned
files will be sent?
What is the domain name for the Send to
Folder server?
What are the username and password
that are required to access the Send to
Folder server?
Use the following format:
\\Servername\Sharename 
ENWW Digital-send setup worksheet 263
 
						

							
LAN Fax
If you want the HP-authorized support
representative to assist you with setting
up this feature, provide the information in
this section.
Contact the network administrator for
your organization if you need to find this
information.What is the IP address or server name
for the LAN Fax server? 
What is the path to the folder on the LAN
Fax server where the device should send
the scanned images? (Use UNC format.) 
What is the domain for the LAN Fax
server? 
What are the username and password
that are required to access the LAN Fax
server? 
What operating system does the LAN
Fax server use? 
If the LAN Fax server name is not in the
list of third-party LAN Fax servers that
are supported by HP, provide answers to
the questions in this section.What is the maximum transmission
speed for the LAN Fax server? 
Do you want the LAN Fax server to
generate a cover page for each fax? 
Does the LAN Fax server support error-
correction mode? 
What is the maximum number of times
that the LAN Fax server should attempt
to redial? 
How many minutes should the LAN Fax
server wait between redial attempts? 
What is the default resolution for images
that are sent to the LAN Fax server? 
For all LAN Fax servers, complete the
information in this section. If the LAN Fax server support
notifications, what length of time should
be used for the notification timeout? 
If you plan to use billing codes, what is
the default billing code? 
What is the minimum length for the billing
code? 
Do you want users to be able to edit the
billing codes from the device control
panel? 
Table B-2
  Digital-send setup worksheet (continued)
264 Appendix B   Worksheets ENWW
 
						

							
Internet Fax
If you want the HP-authorized support
representative to assist you with setting
up this feature, provide the information in
this section.
Contact the network administrator for
your organization and the Internet Fax
service provider if you need to find this
information. What is the domain name for the Internet
Fax service provider? 
What e-mail address do you want to use
for the default “from” address? 
Do you want to use the e-mail address
for the user who is signed in as the “Sent
from Fax” address? 
What is the T37 Prefix for the Internet
Fax provider? 
If you want to use auto-complete for the
fax number, based on the North
American Dialing plan, what is the area
code? 
If you plan to use billing codes, what is
the default billing code? 
What is the minimum length for the billing
code? 
Do you want users to be able to edit the
billing codes from the device control
panel? 
Table B-2
  Digital-send setup worksheet (continued)
ENWW Digital-send setup worksheet 265
 
						

							
Security configuration checklist
This device has a security configuration checklist that is approved by the National Institute of Standards
and Technology (NIST), which is a U.S. government organization. A security configuration checklist is
a document that contains instructions or procedures  for configuring an IT product to a baseline level of
security.
You can download the checklist for this device from this Web site: 
www.hp.com/go/secureprinting . Click
the link for  Configuration checklists , which is near the bottom of the page.
266 Appendix B   Worksheets ENWW