Epson Wf 3620 Manual

							

4.
Select Wi-FiSetup Wizard .
 Note:
Ifyou need todisable thewireless networktoset upyour product onanEthernet network,
 scroll
down andselect Disable Wi-Fiinstead. Thenfollow theinstructions onchanging toawired
 network
connection inthis manual.
 5.
Select thename ofyour wireless networkorenter thename manually.
 Note:
Toenter thewireless networknamemanually, selectOther Networks ,then select the
 Network
(SSID)field.Usethedisplayed keypadtoenter yournetwork name.
 6.
Select thePassword field,andenter yourwireless password usingthedisplayed keypad.
 7.
Press whenyou’re finished entering yourpassword, thenselect Proceed .
 8.
Confirm thedisplayed networksettingsandselect OKtosave them.
 Note:
Ifyou need tochange asetting, pressthebackbutton.
 9.
Ifyou want toprint anetwork setupreport, pressoneofthe buttons. (Otherwise, selectDone.)
 10.
Press the homebutton toreturn tothe Home screen.
 If
the network connection issuccessful, theWi-Fi iconinthe upper-right cornerofthe LCD screen is
 lit
as shown.
 Parent
topic:Wi-FiInfrastructure ModeSetup
 41    
						

							

Related
tasks
 Entering
Characters onthe LCD Screen
 Wi-Fi
Direct ModeSetup
 You
cansetupyour product tocommunicate directlywithyour computer oranother devicewithout
 requiring
awireless routeroraccess point.
 1
 Epson
product
 2
 Computer
withawireless interface
 3
 Other
wireless device
 Your
product automatically selectsoneofthese modes tocommunicate withyour computer ordevice:
 Access
pointmode
 If
your product isnot already connected toawireless network, itenters access pointmode andthe
 product
itselfactsasthe network accesspointforupto4devices. Whenoperating inthis mode, your
 product
displays anAP connection symbolonthe LCD screen.
 Peer-to-peer
mode
 If
your product isalready connected toawireless network, itenters peer-to-peer modeand
 disconnects
fromanyother networks. Thisalsodisables anyother product features requiring access
 to
the Internet. Whenoperating inthis mode, yourproduct displays aDirect orDconnection symbol
 on
the LCD screen.
 Note:
Todisconnect apeer-to-peer modeconnection, releasetheconnection toyour product from
 your
computer orother device. Yourproduct willreconnect tothe previously usednetwork.
 42  
						

							

Enabling
Wi-FiDirect Mode
 Parent
topic:Wi-FiorWired Networking
 Enabling
Wi-FiDirect Mode
 You
canenable Wi-FiDirect modetoallow direct communication betweenyourproduct andcomputer or
 other
devices withoutawireless routeroraccess point.
 1.
Press the homebutton, ifnecessary.
 2.
Press .
 3.
Select Wi-FiSetup .
 You
seethisscreen:
 4.
Scroll downandselect Wi-FiDirect Setup.
 5.
Select Connection Setup.
 6.
Select Change Password ,then select Yes.
 Note:
Ifyou have already connected devicesorcomputers toyour product viaWi-Fi Direct, theywill
 be
disconnected whenyouchange thepassword.
 7.
Enter aWi-Fi Direct password usingthedisplayed keyboard.
 Note:
Yourpassword mustbeatleast 8and nomore than22characters long.
 43  
						

							

8.
Press whenyou’re finished entering yourpassword.
 You
seethisscreen:
 9.
Scroll downtoview theSSID (Wi-Fi network name)andpassword.
 10.
Use your computer orwireless devicetoselect theWi-Fi network name(SSID) displayed onthe
 LCD
screen, thenenter thepassword shown.
 11.
Press the homebutton toreturn tothe Home screen.
 You
seeeither anAP ,D ,or Direct connection symbolonthe LCD screen andshould beable toprint
 directly
toyour product fromyourcomputer ordevice.
 Note:
Ifthe AP,D ,or Direct connection symbolisnot displayed onthe LCD screen, Wi-FiDirect
 mode
isnot enabled. Repeatthesestepstotry again.
 Parent
topic:Wi-FiDirect ModeSetup
 Related
tasks
 Entering
Characters onthe LCD Screen
 Wi-Fi
Protected Setup(WPS)
 If
your network usesaWPS-enabled wirelessrouteroraccess point,youcanquickly connect your
 product
tothe network usingWi-FiProtected Setup(WPS).
 44  
						

							

Note:
Tocheck ifyour router isWPS-enabled, lookforabutton labeled WPSonyour router oraccess
 point.
Ifthere isno hardware button,theremaybeavirtual WPSbutton inthe software forthe device.
 Check
yournetwork productdocumentation fordetails.
 Using
WPStoConnect toaNetwork
 Parent
topic:Wi-FiorWired Networking
 Using
WPStoConnect toaNetwork
 If
you have aWPS-enabled wirelessrouteroraccess point,youcanuseWi-Fi Protected Setup(WPS) to
 connect
yourproduct tothe network.
 1.
Press the homebutton, ifnecessary.
 2.
Press .
 3.
Select Wi-FiSetup .
 You
seethisscreen:
 4.
Select PushButton Setup(WPS).
 5.
Follow theinstructions onthe LCD screen tocomplete WPSsetup.
 6.
Press the homebutton toreturn tothe Home screen whenfinished.
 If
the network connection issuccessful, theWi-Fi iconinthe upper-right cornerofthe LCD screen is
 lit
as shown.
 45   
						

							

Parent
topic:Wi-FiProtected Setup(WPS)
 Printing
aNetwork StatusSheet
 You
canprint anetwork statussheettohelp youdetermine thecauses ofany problems youmay have
 using
yourproduct onanetwork.
 1.
Press the homebutton, ifnecessary.
 2.
Select Setup.
 You
seethisscreen:
 3.
Select Network Status.
 4.
Select Wi-Fi/Network Status.
 46  
						

							

You
seeascreen likethis:
 5.
Select Print,then press oneofthe buttons toprint thenetwork statussheet.
 Examine
thesettings shownonthe network statussheettodiagnose anyproblems youhave.
 Parent
topic:Wi-FiorWired Networking
 Changing
orUpdating NetworkConnections
 See
these sections tochange orupdate howyour product connects toanetwork.
 Accessing
theWeb Config Utility
 Changing
aUSB Connection toaWi-Fi Connection
 Changing
aWi-Fi Connection toaWired Network Connection
 Connecting
toaNew Wi-Fi Router
 Disabling
Wi-FiFeatures
 Parent
topic:Wi-FiorWired Networking
 Accessing
theWeb Config Utility
 You
canselect yourproducts networksettingsandconfirm itsoperating statususingaweb browser.
 You
dothis byaccessing yourproducts built-inWebConfig utilityfromacomputer orother device thatis
 connected
tothe same network asyour product.
 Note:
Formore information onthe Web Config utilityseetheAdministrator s Guide .
 47  
						

							

1.
Print anetwork statussheet.
 2.
Locate theIPAddress foryour product thatislisted onthe network statussheet.
 3.
Onacomputer orother device connected tothe same network asyour product, openaweb
 browser.

4.
Enter yourproducts IPaddress intotheaddress bar.
 You
seetheavailable WebConfig utilityoptions.
 Parent
topic:Changing orUpdating NetworkConnections
 Related
tasks
 Printing
aNetwork StatusSheet
 Changing
aUSB Connection toaWi-Fi Connection
 If
you have already connected yourproduct toyour computer usingaUSB connection, youcanchange
 to
aWi-Fi connection oradd aWi-Fi connection toprint wirelessly.
 1.
Doone ofthe following:
 •
Ifyou want touse only aWi-Fi connection, disconnecttheUSB cable fromyourproduct. With
 Windows,
alsouninstall yourproduct software.
 •
Ifyou want toadd aWi-Fi connection inaddition toaUSB connection, leavetheUSB cable
 connected
toyour product.
 2.
Download yourproduct software fromtheEpson website, orinstall itfrom theCD that came with
 your
product usingtheinstructions onthe Start Here sheet.
 Parent
topic:Changing orUpdating NetworkConnections
 Changing
aWi-Fi Connection toaWired Network Connection
 If
you have already connected yourproduct toyour computer wirelessly, youcanchange toawired
 network
connection ifnecessary.
 1.
Disable yourproducts Wi-Fifeatures.
 2.
Connect oneendofan Ethernet networkcabletothe products LANport.
 3.
Connect theother endtoany available LANportonyour router oraccess point.
 4.
Download andinstall yourproduct software fromtheEpson website, orinstall itfrom theCD that
 came
withyour product.
 5.
Follow theon-screen instructions toinstall thesoftware.
 48 
						

							

6.
When youseetheSelect YourConnection screen,selectWired network connection .
 7.
Ifyou seeaSelect SetupOption screen, selectSetup printer forthe first time.
 8.
Continue followingtherest ofthe on-screen instructions.
 Parent
topic:Changing orUpdating NetworkConnections
 Related
tasks
 Disabling
Wi-FiFeatures
 Connecting
toaNew Wi-Fi Router
 If
you change thewireless routeryouhave been using onyour network, youcanupdate yourproducts
 Wi-Fi
connection tothe new router.
 1.
Doone ofthe following:
 •
Windows :Uninstall yourproduct software.
 •
OS X:Go tothe next step.
 2.
Download yourproduct software fromtheEpson website, orinstall itfrom theCD that came with
 your
product usingtheinstructions onthe Start Here sheet.
 Parent
topic:Changing orUpdating NetworkConnections
 Related
tasks
 Uninstalling
ProductSoftware -Windows
 Disabling
Wi-FiFeatures
 You
may need todisable yourproducts Wi-Fifeatures ifyou change yournetwork connection typeor
 need
tosolve aproblem withyour network connection.
 Note:
Before disabling Wi-Fifeatures, makeanote ofyour products SSID(network name)and
 password,
andanynetwork settingsselected forthe Epson Connect servicesyoumay use.
 1.
Press the homebutton, ifnecessary.
 2.
Press .
 3.
Select Wi-FiSetup .
 You
seethisscreen:
 49  
						

							

4.
Scroll downandselect Disable Wi-Fi.
 5.
Select Yestodisable Wi-Fi.
 Parent
topic:Changing orUpdating NetworkConnections
 50