Canon printer MAXIFY MB2020 User Manual
Have a look at the manual Canon printer MAXIFY MB2020 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Setting a Page Size and OrientationThe paper size and orientation are essentially determined by the application software. When the page size and orientation set for Page Size and Orientation on the Page Setup tab are same as those set with the application software, you do not need to select them on the Page Setup tab. When you are not able to specify them with the application software, the procedure for selecting a page size and orientation is as follows: You can also set page size and orientation on the Quick Setup tab.1. Open the printer driver setup window 2. Select the paper size Select a page size from the Page Size list on the Page Setup tab. 3. Set Orientation Select Portrait or Landscape for Orientation . Check Rotate 180 degrees check box when you want to perform printing with the original being rotated 180 degrees. 4. Complete the setup Click OK. When you execute print, the document will be printed with the selected page size and the orientation. Note • If Normal-size is selected for Page Layout, then Automatically reduce large document that the printer cannot output is displayed. Normally, you can leave the check box checked. During printing, if you do not want to reduce large documents that cannot be printed on the printer, uncheck the check box. 391
Setting the Number of Copies and Printing OrderThe procedure for specifying the number of copies and printing order is as follows: You can also set the number of copies on the Quick Setup tab.1. Open the printer driver setup window 2. Specify the number of copies to be printed For Copies on the Page Setup tab, specify the number of copies to be printed. 3. Specify the print order Check the Print from Last Page check box when you want to print from the last page in order, and uncheck the check box when you want to print from the first page. Check the Collate check box when you are printing multiple copies of a document and want to print out all pages in each copy together. Uncheck this check box when you want to print all pages with the same page number together. • Print from Last Page : /Collate : • Print from Last Page : /Collate : • Print from Last Page : /Collate : 392
• Print from Last Page: /Collate : 4. Complete the setup Click OK. When you execute print, the specified number of copies will be printed with the specified printing order. Important • When the application software that you used to create the document has the same function, specify the settings on the printer driver. However, if the print results are not acceptable, specify the function settings on the application software. When you specify the number of copies and the printing order with both the application software and this printer driver, the number of copies may be multiplied numbers of the two settings or the specified printing order may not be enabled. • Print from Last Page appears grayed out and is unavailable when Tiling/Poster is selected for Page Layout . • When Booklet is selected for Page Layout, Print from Last Page and Collate appear grayed out and cannot be set. • When Duplex Printing is selected, Print from Last Page appears grayed out and cannot be set. Note • By setting both Print from Last Page and Collate , you can perform printing so that papers are collated one by one starting from the last page. These settings can be used in combination with Normal-size, Fit-to-Page , Scaled , and Page Layout . 393
Setting the Stapling Margin The procedure for setting the staple side and the margin width is as follows: 1. Open the printer driver setup window 2. Specify the side to be stapledCheck the position of the stapling margin from Stapling Side on the Page Setup tab. The printer analyzes the Orientation and Page Layout settings, and automatically selects the best staple position. When you want to change the setting, select from the list. 3. Set the margin width If necessary, click Specify Margin... and set the margin width, and then click OK. 394
Note• The printer automatically reduces the print area depending on the staple position margin. 4. Complete the setup Click OK on the Page Setup tab. When you execute print, the data is printed with the specified staple side and margin width. Important • Stapling Side and Specify Margin... appear grayed out and are unavailable when: • Tiling/Poster or Booklet is selected for Page Layout • Scaled is selected for Page Layout (When Duplex Printing is also selected, only Stapling Side can be specified.) 395
Fit-to-Page Printing The procedure for printing a document that is automatically enlarged or reduced to fit the page size to be used is as follows: 1. Open the printer driver setup window 2. Set fit-to-page printing Select Fit-to-Page from the Page Layout list on the Page Setup tab. 3. Select the paper size of the document Using Page Size , select the page size that is set with your application software. 4. Select the print paper size Select the size of the paper loaded in the printer from the Printer Paper Size list. When the Printer Paper Size is smaller than the Page Size, the page image will be reduced. When the Printer Paper Size is larger than the Page Size, the page image will be enlarged. The current settings are displayed in the settings preview on the left side of the printer driver. 396
5. Complete the setup Click OK. When you execute print, the document will be enlarged or reduced to fit to the page size. 397
Scaled Printing The procedure for printing a document with pages enlarged or reduced is as follows: 1. Open the printer driver setup window 2. Set scaled printingSelect Scaled from the Page Layout list on the Page Setup tab. 3. Select the paper size of the document Using Page Size , select the page size that is set with your application software. 4. Set the scaling rate by using one of the following methods: • Select a Printer Paper Size When the printer paper size is smaller than the Page Size, the page image will be reduced. When the printer paper size is larger than the Page Size, the page image will be enlarged. 398
• Specify a scaling factorDirectly type in a value into the Scaling box. The current settings are displayed in the settings preview on the left side of the printer driver. 5. Complete the setup Click OK. When you execute print, the document will be printed with the specified scale. Important • When the application software which you used to create the original has the scaled printing function, configure the settings on your application software. You do not need to configure the same setting in the printer driver. 399
Note• Selecting Scaled changes the printable area of the document.400