Home > Canon > Printer > Canon printer MAXIFY MB2020 User Manual

Canon printer MAXIFY MB2020 User Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer MAXIFY MB2020 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 1116
    Add page 291 to Favourites
    image text
    Enable zoom 
    							Changing the Settings in the Wireless LAN SheetTo change the wireless network settings of the printer, connect the printer and the computer with a USB
cable temporarily. If you modify the wireless network settings of the computer over wireless connection
without USB connection, your computer may not be able to communicate with the machine after modifying
the settings.
Note
•
This screen is not available depending on the printer you are using.
•
Activate the wireless LAN setting of the printer to change the settings in the  Wireless LAN sheet.
1.
Start up IJ Network Tool.
2.
Select the printer in  Printers:.
When the printer is connected to the computer with a USB cable temporarily, select the printer with "USBnnn" (where "n" is a number) appearing in the  Port Name column.
3.
Select Configuration...  from the Settings menu.
4.
Click the  Wireless LAN  tab.
The  Wireless LAN  sheet is displayed.
For details on the  Wireless LAN sheet, see Wireless LAN Sheet .
5.
Change the settings or confirm.
SSID: Enter the same value that was set for the target access point.
When the printer is connected with USB, the  Search screen appears by clicking  Search.... Set the
SSID of the access point by selecting the one of the detected access points.
Search Screen
291
    Add page 292 to Favourites
    image text
    Enable zoom 
    							Note•
Enter the same SSID that the access point is configured to use. The SSID is case-sensitive.
Encryption Method: Select the encryption method used over the wireless LAN.
You can change WEP settings with selecting  Use WEP and clicking  Configuration... .
Changing the WEP Detailed Settings
You can change WPA/WPA2 settings with selecting  Use WPA/WPA2 and clicking Configuration... .
Changing the WPA/WPA2 Detailed Settings
Important
•
If all encryption types of the access point, printer, or computer do not match, the printer cannot
communicate with the computer. If the printer cannot communicate with the computer after the encryption type of the printer was switched, make sure that encryption types for the computer andthe access point match that set to the printer.
•
If you connect to a network that is not protected with security measures, there is a risk of disclosing
data such as your personal information to a third party.
TCP/IP Setup: Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for your
network environment.
6.
Click  OK.
After changing configuration, a screen is displayed asking you for confirmation before the settings are
sent to the printer. If you click  Yes, the settings are sent to the printer and the  Transmitted Settings
screen is displayed.
Note
•
Changing the network settings with the USB cable temporarily may switch the default printer. In
this case, reset  Set as Default Printer .
292
    Add page 293 to Favourites
    image text
    Enable zoom 
    							Changing the WEP Detailed Settings
Note
•
This screen is not available depending on the printer you are using.
To change the wireless network settings of the printer, connect the printer and the computer with a USB
cable temporarily. If you modify the wireless network settings of the computer over wireless connection
without USB connection, your computer may not be able to communicate with the machine after modifying the settings.
1.
Start up IJ Network Tool.
2.
Select the printer in  Printers:.
When the printer is connected to the computer with a USB cable temporarily, select the printer with "USBnnn" (where "n" is a number) appearing in the  Port Name column.
3.
Select Configuration...  from the Settings menu.
4.
Click the  Wireless LAN  tab.
5.
Select Use WEP  in Encryption Method:  and click Configuration... .
The  WEP Details  screen is displayed.
6.
Change the settings or confirm.
When changing the password (WEP key), the same change must be made to the password (WEP key)
of the access point.
1.
WEP Key:
Enter the same key as the one set to the access point. The number of characters and character type that can be entered differ depending on the combination of the key length and key format.
 Key Length64bit128bitKey FormatASCII5 characters13 charactersHexadecimal ( Hex
)10 digits26 digits
293
    Add page 294 to Favourites
    image text
    Enable zoom 
    							2.Key Length:
Select either  64bit or 128bit .3.
Key Format:
Select either  ASCII or Hex .
4.
Key ID:
Select the Key ID (index) set to the access point.
5.
Authentication:
Select the authentication method to authenticate the printer's access to the access point. Normally, select  Auto. If you want to specify the method manually, select  Open System or
Shared Key  according to the setting of the access point.
7.
Click OK.
Important
•
If the printer cannot communicate with the computer after the encryption type of the printer was
switched, make sure that encryption types for the computer and the access point match that set to
the printer.
Note
•
Changing the network settings with the USB cable temporarily may switch the default printer. In
this case, reset  Set as Default Printer .
294
    Add page 295 to Favourites
    image text
    Enable zoom 
    							Changing the WPA/WPA2 Detailed Settings
Note
•
This screen is not available depending on the printer you are using.
To change the wireless network settings of the printer, connect the printer and the computer with a USB
cable temporarily. If you modify the wireless network settings of the computer over wireless connection
without USB connection, your computer may not be able to communicate with the machine after modifying the settings.
The example screenshots in this section refer to the WPA detailed settings.
1.
Start up IJ Network Tool.
2.
Select the printer in  Printers:.
When the printer is connected to the computer with a USB cable temporarily, select the printer with "USBnnn" (where "n" is a number) appearing in the  Port Name column.
3.
Select Configuration...  from the Settings menu.
4.
Click the  Wireless LAN  tab.
5.
Select Use WPA/WPA2  in Encryption Method:  and click Configuration... .
The  WPA/WPA2 Details  screen is displayed.
If encryption is not set to the printer, the  Authentication Type Confirmation screen is displayed. Go to
step 7.
6.
Click  Change Settings... .
7.
Check the client authentication type and click  Next>.
295
    Add page 296 to Favourites
    image text
    Enable zoom 
    							8.
Enter the passphrase, then click Next>.
Enter the passphrase set to the access point. The passphrase should be a string of 8 to 63 alphanumeric
characters or a 64-digit hexadecimal value.
If you do not know the access point passphrase, refer to the instruction manual provided with the access point or contact its manufacturer.
The dynamic encryption method is selected from either TKIP (basic encryption) or AES (secure
encryption) automatically.
Important
•
If  Auto  is not displayed on  Dynamic Encryption Type: , select either TKIP(Basic Encryption)  or
AES(Secure Encryption) .
9.
Click Finish .
296
    Add page 297 to Favourites
    image text
    Enable zoom 
    							Important
•
If the printer cannot communicate with the computer after the encryption type of the printer wasswitched, make sure that encryption types for the computer and the access point match that set to
the printer.
Note
•
Changing the network settings with the USB cable temporarily may switch the default printer. In
this case, reset  Set as Default Printer .
297
    Add page 298 to Favourites
    image text
    Enable zoom 
    							Changing the Settings in the Wired LAN Sheet
Note
•
This screen is not available depending on the printer you are using.
•
Activate the wired LAN setting of the printer to change the settings in the Wired LAN sheet.
1.
Start up IJ Network Tool.
2.
Select the printer in  Printers:.
3.
Select Configuration...  from the Settings menu.
4.
Click the  Wired LAN  tab.
The  Wired LAN  sheet is displayed.
For details on the  Wired LAN sheet, see Wired LAN Sheet .
5.
Change the settings or confirm.
Set the IP address of the printer to be used over the LAN. Specify a value appropriate for your network
environment.
6.
Click  OK.
After changing configuration, a screen is displayed asking you for confirmation before the settings are
sent to the printer. If you click  Yes, the settings are sent to the printer and the  Transmitted Settings
screen is displayed.
298
    Add page 299 to Favourites
    image text
    Enable zoom 
    							Changing the Settings in the Admin Password Sheet
Note
•
You cannot change the settings when using the access point mode.
1.
Start up IJ Network Tool.
2.
Select the printer in Printers:.
3.
Select Configuration...  from the Settings menu.
4.
Click the  Admin Password  tab.
The  Admin Password  sheet is displayed.
For details on the Admin Password  sheet, see Admin Password Sheet .
5.
Change the settings or confirm.
To use an administrator password, select the  Use admin password check box and enter a password.
Important
•
The password should consist of alphanumeric characters and be no longer than 32 characters.
The password is case-sensitive. Do not forget the password you set.
If you forget the administrator password you specified, initialize the printer to revert the passwordto the default setting.
6.
Click  OK.
A screen is displayed asking you for confirmation before the settings are sent to the printer. If you click
Yes , the settings are sent to the printer and the  Transmitted Settings screen is displayed.
299
    Add page 300 to Favourites
    image text
    Enable zoom 
    							Monitoring Wireless Network Status
Note
•
This screen is not available depending on the printer you are using.
•
When using the machine over the wired LAN, you cannot monitor network status.
1.
Start up IJ Network Tool.
2.
Select the printer in Printers:.
3.
Select Status from the  View menu.
The  Status  screen is displayed and you can check the printer status and connection performance.
Important
•
If the indicated value is low, move your printer closer to the wireless network device.
4.
If you measure the connection performance in detail, click  Advanced Measurement....
The  Connection Performance Measurement  screen is displayed.
5.
Click Next> .
The measurement starts and the status displays. Measurement takes a few minutes.
300
    All Canon manuals Comments (0)

    Related Manuals for Canon printer MAXIFY MB2020 User Manual