Canon printer MAXIFY MB2020 User Manual
Have a look at the manual Canon printer MAXIFY MB2020 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1600Cause Ink may have run out. Action Replacing the ink tank is recommended. If printing is in progress and you want to continue printing, press the machine's OK button with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The machine may be damaged if printing is continued under the ink out condition. Since the information contained in the fax may be lost if it is printed in this condition, the received fax will not be printed and will be stored in the machine's memory until the ink is replaced. You must manually print out faxes that were stored in the memory. You can change the setting so that the received fax is forcibly printed out instead of being stored in the memory, but all or part of the fax information may not be printed because of the ink out condition. Important • Do not remove an ink tank until a new one is prepared to be installed. • Once you remove an ink tank, the machine will not operate until a new one is installed. • Once you remove an ink tank, the machine will not operate even if the removed ink tank is just reinstalled. 1031
1660Cause The ink tank is not installed. Action Install the ink tank.1032
1688Cause The ink has run out. Action Replace the ink tank and close the front cover. Printing under the current condition may damage the machine. If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the machine's Stop button for at least 5 seconds, and then release it. With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition. Important • Do not remove an ink tank until a new one is prepared to be installed. • Once you remove an ink tank, the machine will not operate until a new one is installed. • Once you remove an ink tank, the machine will not operate even if the removed ink tank is just reinstalled. Note • Since the information contained in the fax may be lost if it is printed in this condition, the received fax will not be printed and will be stored in the machine's memory until the ink is replaced. You must manually print out faxes that were stored in the memory. You can change the setting so that the received fax is forcibly printed out instead of being stored in the memory, but all or part of the fax information may not be printed because of the ink out condition. 1033
1700Cause The ink absorber is almost full. Action Press the machine's OK button to continue printing. Contact the service center.1034
1701Cause The ink absorber is almost full. Action Press the machine's OK button to continue printing. Contact the service center.1035
1754Cause The ink tank is not installed properly. Action Open the front cover. Then push the ink tank. After installing the ink tank properly, close the front cover. If the problem is not resolved, contact the service center. Important • The ink tank that was once installed cannot be removed until the ink runs out. 1036
1755Cause The ink has run out. Action To maintain both machine and print quality, the machine cannot continue printing under the ink out condition. Cancel printing and replace the ink tank before printing again. Important • Do not remove an ink tank until a new one is prepared to be installed. • Once you remove an ink tank, the machine will not operate until a new one is installed. • Once you remove an ink tank, the machine will not operate even if the removed ink tank is just reinstalled. Note • Since the information contained in the fax may be lost if it is printed in this condition, the received fax will not be printed and will be stored in the machine's memory until the ink is replaced. You must manually print out faxes that were stored in the memory. 1037
1871Cause The cassette is not inserted. Action Insert the cassette. Note • The cassette paper information registration screen is displayed after inserting the cassette. Registerthe cassette paper information according to the paper you loaded in the cassette. • If you want to cancel printing, press the machine's Stop button. 1038
1890Cause The protective material for the print head holder or the tape may remain attached to the holder. Action Open the front cover, then confirm that the protective material or the tape does not remain attached to the print head holder. If you find the protective material or the tape remains attached, remove it, then close the front cover. If the problem is not resolved, contact the service center. 1039
2001Cause The device incompatible with the machine is connected. Action Check the device connected to the USB flash drive port. Printing photos directly is possible with a USB flash drive.1040