Xerox WorkCentre PE120i User Manual
Have a look at the manual Xerox WorkCentre PE120i User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
9 TROUBLESHOOTING This chapter gives helpful information for what to do if you encounter an error. This chapter includes: • Clearing Document Jams • Clearing Paper Jams • Clearing LCD Error Messages • Solving Other Problems Downloaded From ManualsPrinter.com Manuals
Troubleshooting9.2 Clearing Document Jams When a document jams while passing through the ADF (Automatic Document Feeder), “Document Jam” appears on the display. Input Misfeed 1Remove any remaining page(s) from the ADF. 2Open the ADF cover. 3Rotate the bushing on the right end of the ADF roller toward the ADF ( c) and remove the roller from the slot ( d). Pull the document gently to the left and out of the ADF. Downloaded From ManualsPrinter.com Manuals
Troubleshooting9.3 9 4Align the left end of the ADF roller with the slot and push the right end of the ADF roller into the right slot ( c). Rotate the bushing on the right end of the roller toward the document input tray ( d). 5Close the ADF cover. Then load the removed page(s), if any, back into the ADF. NOTE: To prevent document jams, use the document glass for thick, thin, or mixed paper-type documents. Exit Misfeed 1Remove any remaining page(s) from the ADF. 2Open the document cover and turn the release knob to remove the misfed documents from the document output tray. 3Close the document cover. Then load the removed page(s), if any, back into the ADF. Downloaded From ManualsPrinter.com Manuals
Troubleshooting9.4 Roller Misfeed 1Remove any remaining page(s) from the ADF. 2Open the document cover. 3Turn the release knob so that you can easily seize the misfed page, and remove the page from the roller or the feed area by carefully pulling it to the right using both hands. 4Close the document cover. Then load the removed page(s), if any, back into the ADF. Downloaded From ManualsPrinter.com Manuals
Troubleshooting9.5 9 Clearing Paper Jams When a paper jam occurs, “Paper Jam” appears on the display. Refer to the table below to locate and clear the paper jam. To avoid tearing the paper, pull out the jammed paper gently and slowly. Follow the instructions in the following sections to clear the jam. In Tray 1 1Open and close the front door. The jammed paper automatically exits the machine. If the paper does not exit, continue to step 2. 2Pull Tray 1 open. MessageLocation of JamGo to [Paper Jam 0] Open/Close DoorIn the paper tray (Tray 1 or Tray 2)below and page 9.7 [Paper Jam 1] Open/Close DoorIn the fuser area or around the toner cartridge.page 9.8 [Paper Jam 2] Check InsideIn the paper exit area page 9.9 Bypass Jam In the Bypass tray page 9.11 Downloaded From ManualsPrinter.com Manuals
Troubleshooting9.6 3Remove the jammed paper by gently pulling it straight out. If there is any resistance and the paper does not move when you pull, or if you cannot see the paper in this area, check the fuser area around the toner cartridge. See page 9.8. 4Insert the paper tray into the machine until it snaps into place. 5Open and close the front door to resume printing. Downloaded From ManualsPrinter.com Manuals
Troubleshooting9.7 9 In Optional Tray 2 1Pull the optional Tray 2 open. 2Remove the jammed paper from the machine. If there is any resistance and the paper does not move when you pull, or if you cannot see the paper in this area, go to step 3. 3Pull the standard Tray 1 open. 4Pull the paper straight up and out. 5Insert Tray 1 into the machine until it snaps into place. 6Open and close the front door to resume printing. Downloaded From ManualsPrinter.com Manuals
Troubleshooting9.8 In the Fuser Area or Around the Toner Cartridge NOTE: The fuser area is hot. Take care when removing paper from the machine. 1Remove paper from back by opening the back door cover and pulling it out of the fuser. 2Open the front door and pull the toner cartridge out, lightly pushing it down. 3Remove the jammed paper by gently pulling it straight out. Downloaded From ManualsPrinter.com Manuals
Troubleshooting9.9 9 4Replace the toner cartridge and close the front door. Printing automatically resumes. In the Paper Exit Area 1Open and close the front door. The jammed paper automatically exits the machine. If the paper does not exit, continue to step 2. 2Gently pull the paper out of the front output tray. Skip to step 6. Downloaded From ManualsPrinter.com Manuals
Troubleshooting9.10 3If there is any resistance and the paper does not move when you pull, or if you cannot see the paper in the front output tray, open the rear door. 4Remove the jammed paper by gently pulling it straight out. 5Close the rear door. 6Open and close the front door to resume printing. Downloaded From ManualsPrinter.com Manuals