Samsung UE 40C7000 User Manual

							31English
04A\fvance\f	FeaturesNetwork	Setup	(Auto)
Use the Automatic \yNetwork	Setup when connecting yo\yur 
TV to a network th\yat supports DHCP\b To set up your TV’s 
cable network conn\yection automatical\yly, \follow these st\yeps:
How	to	set	up	automatically
1.	Connect your TV to \yyour LAN as describ\yed in the 
previous section\b
2.	 Turn on your TV, press the MENU button on your 
remote, use the ▲ or ▼ button to select \ySetup, and 
then press the ENTER
E button\b
3.	 Use the ▲ or ▼ button to select \yNetwork in the Setup 
menu, and then press the ENTER
E button\b The 
Network screen appears\b
4.	 On the Network screen, select Network	Type\b
5.	 Set Network	Type to Wire\f\b
6.	 Select Network	Setup\b The Network	Setup screen 
appears\b
7.	 Set Internet	Protocol	Setup to Auto\b 
8.	 Auto acquires and enters the n\yeeded Internet values  automatically\b
9	 When done, press the RETURN button on your remote\b
10.	 I\f the Network Function has not \yacquired the network 
connection values,\y go to the directions \for Manual\b
Network	Setup	(Manual)
Use the Manual Network	Setup when connecting yo\yur TV to 
a network that requires a Static IP address\b 
Getting	the	Network	\bonnection	Values
To get the Network \yconnection values \yon most Windows 
computers, \follow t\yhese steps:
1.	 Right click the Ne\ytwork icon on the \ybottom right o\f the\y 
screen\b
2.	 In the pop-up menu\y that appears, cli\yck Status\b
3.	 On the dialog that \yappears, click the\y Support tab\b
4.	 On the Support Tab, click the Deta\yils button\b The 
Network connection\y values are displayed\b
How	to	set	up	manually
To set up your TV’s cable network co\ynnection manually, \y
\follow these steps:\y 
1.	 Follow Steps 1 through 6 in the “How\y to set up 
automatically” procedure\b
2.	 Set Internet	Protocol	Setup to Manual\b
3.	 Press the ▼ button on your remote to go to the\y first 
entry field\b
4.	 Enter the IP	A\f\fress, Subnet	Mask, Gateway, and 
DNS	Server values\b Use the nu\ymber buttons on you\yr 
remote to enter num\ybers and the arrow buttons to move\y 
\from one entry field t\yo another\b
5.	 When done, press the RETURN button on your remote\b
6.	 Select Network	Test to check the Inte\yrnet connectivity\b
Network Setup
IP Address   :    
Subnet Mask  :    
Gateway  :    
DNS  : Auto
DNS Server   : 
   
U Move  E Enter  R Return
Internet Protocol Setup  : Auto ►
Network
U Move  E Enter  R Return
Network Type   : Wired ►
Network Setup 
Network Test
SWL(Samsung Wireless Link)  : Off
SWL connect 
[N-Euro]BN68-02590E-03L05.indb   312010-05-17   오후 5:43:51Downloaded From TV-Manual.com ManualL 
						

							32English
Ad\fanced Features
	
¦ \bonnecting	to	a	Wireless	Network
To connect your TV t\yo your network wirelessly, you need a \ywireless router or modem and \ya Samsung Wireless LAN Adapter 
(WIS09ABGN, WIS09AB\yGN2, WIS10ABGN), wh\yich you connect to \yyour TV’s back or side pane\yl USB jack\b See the \yillustration 
below\b
Samsung’s Wireless LAN adapter i\ys sold separately a\ynd is o\f\fered by select retailers, Ecommerce sites and Samsun\ygparts\b
com\b Samsung’s Wireless LAN adapter s\yupports the IEEE 802\b\y11A/B/G and N commu\ynication protocols\b Samsung 
recommends using IEEE \y802\b11N\b When you pl\yay the video over a\y IEEE 802\b11B/G conne\yction, the video ma\yy not play 
smoothly\b
 
✎NOTE
 
xYou must use the “Samsung Wireless L AN Adapter” (WIS09ABGN, WIS09ABGN2, WIS10ABGN) to use a wireless 
network\b 
 
xSamsung’s Wireless L AN Adapter is sold separately\b The Samsung Wireless L AN Adapter is o\f\fered by select 
retailers, Ecommerce sites and Samsungparts\bcom\b 
 
xTo use a wireless network, your T V must be connected to a wireless IP sharer\b I\f the wireless IP sharer supports 
DHCP, your T V can use a DHCP or static IP address to connect to the wireless network\b 
 
xSelect a channel \for the wireless IP sharer that is not currently being used\b I\f the channel set \for the wireless IP sharer 
is currently being used by another device nearby, this will result in inter\ference and communication \failure\b 
 
xI\f you apply a security system other than the systems listed blow, it will not work with the T V\b 
 
xI\f Pure High-throughput (Green\field) 802\b11N mode is selected and the Encryption type is set to WEP, TKIP or TKIP-
AES (WPS2Mixed) \for your AP, Samsung T Vs will not support a connection in compliance with new Wi-Fi certi\fication 
speci\fications\b 
 
xI\f your AP supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button 
Con\figuration) or PIN (Personal Identi\fication Number)\b WPS will automatically con\figure the SSID and WPA key in 
either mode\b
 
xI\f your router, modem, or device isn’t certi\fied, it may not connect to the T V via the “Samsung Wireless L AN Adapter\b”
 
x\bonnection	Metho\fs : You can setup the wireless network connection six ways\b 
 
– Samsung Auto Configu\yration
 
– PB\b	(WPS)
 
– Auto Setup (Using t\yhe Auto Network Sea\yrch \function)
 
– Manual Setup
 
– SWL(Samsung	Wireless	Link)
 
– A\f-Hoc
 
xThe Samsung Wireless L AN Adapter may not be recognized or work properly when connecting via a USB hub or via 
a USB extension cable other than the one available \from Samsung\b
TV Rear Panel
(HDD)
The LAN Port on 
the Wall
LAN CableWireless IP sharer
(AP having DHCP server)
Samsung WirelessLAN Adapter
or
 
✎To use the  SWL(Samsung 	Wireless 	Link)  \function, connect to the  USB	1 	(HDD)  port\b
[N-Euro]BN68-02590E-03L05.indb   322010-05-17   오후 5:43:51Downloaded From TV-Manual.com ManualL 
						

							33English
04A\fvance\f	Features
Network	Setup	(Samsung	Auto	
\bonfiguration)
This \function is av\yailable in APs (Ac\ycess Points) that \ysupport 
Samsung Auto Configu\yration\b I\f your AP d\yoes not, you can 
connect through PB\b	(WPS), auto, or manuall\yy\b
 
✎This \function is available when SWL(Samsung	
Wireless	Link) is set to Off \b
 
✎You can check \for equipment that supports Samsung 
Auto Con\figuration on www\bsamsung\bcom\b
How	to	set	up	using	Samsung	Auto	\bonfiguration
1.	 Place the AP and TV\y next to each othe\yr and turn them 
on\b
 
✎Because the booting times o\f applications di\f\fer, 
you may have to wait \for approximately 2 minutes\b
 
✎I\f the L AN cable connected the WAN port o\f AP 
during Samsung Auto Con\figuration, you are able 
to complete until internet connection test\b I\f you 
do not connect, Samsung Auto Con\figuration will 
check only device connecting o\f AP (Not check 
internet)\b
2.	 A\fter 2 minutes, co\ynnect the Samsung W\yireless LAN 
Adapter to the TV\b When the Samsung \yWireless LAN 
Adapter is establis\yhed, the pop-up win\ydow appears\b
3.	 As soon as a conne\yction is establish\yed, place the AP in\y 
parallel with the \ySamsung Wireless LAN Adapter g\yiving a 
gap no larger than\y 25cm\b
4.	Wait until the conn\yection is automati\ycally established\b 
 
✎I\f Samsung Auto Con\figuration does not connect 
your T V to your AP, a pop-up window appears 
on the screen noti\fying you o\f the \failure\b Reset 
the AP, and then try again\b I\f the connection \fails 
again, choose one o\f the other connection setup 
methods, PBC (WPS), auto, or manual\b
5.	 A\fter the connectio\yn is established, l\yocate the sharer at 
the desired location\b
 
✎I\f the AP settings have been changed or it is the 
\first time you use the new AP a\fter purchase, you 
need to set up again beginning \from Step 1\b
Network	Setup	(PB\b	(WPS))
How	to	set	up	using	PB\b	(WPS)
I\f your router has a PBC (W\yPS) button, \follow \ythese steps:
1.	 Connect your TV to \ySamsung Wireless LAN Adapter a\ys 
described in the pr\yevious section\b
2.	 Turn on your TV, press the MENU button on your 
remote, use the ▲ or ▼ button to select \ySetup, and 
then press the ENTER
E button\b
3.	 Use the ▲ or ▼ button to select \yNetwork in the Setup 
menu, and then press the ENTER
E button\b
4.	 On the Network screen, select Network	Type\b
5.	 Set Network	Type to Wireless\b
6.	 Select Network	Setup\b The Network	Setup screen 
appears\b
Notice
The picture may appear corrup\yted or have static \y\for some channels w\yhen the TV is conn\yected to the Samsun\yg Wireless LAN 
Adapter\b In such a case, e\ystablish a connect\yion using one o\f th\ye \following methods\y or connect the Sam\ysung Wireless LAN 
Adapter using a USB\y cable in a place \ythat is not a\f\fected by radio inte\yr\ference\b
Metho\f	1 Metho\f	2
Connect using the \yUSB right angle ada\ypter Connect via an ext\yension cable
 
✎The Samsung Wireless L AN Adapter should be 
installed in an inter\ference-\free area in order to 
avoid inter\ference between the adapter and tuner\b
or
[N-Euro]BN68-02590E-03L05.indb   332010-05-17   오후 5:43:52Downloaded From TV-Manual.com ManualL 
						

							34English
Ad\fanced Features
7.	Press the Red button \yon your remote\b
8.	 Press the PBC (WPS) b\yutton on your router within 2 
minutes\b Your TV player autom\yatically acquires all the 
network setting va\ylues it needs and c\yonnects to your 
network\b
9.	 A\fter the network c\yonnection is set u\yp, press the 
RETURN button to exit th\ye Network	Setup screen\b
Network	Setup	(Auto)
Most wireless networks hav\ye an optional secu\yrity system 
that requires devices that acc\yess the network to\y transmit 
an encrypted securi\yty code called an Ac\ycess or Security 
Key\b The Security Ke\yy is based on a Pas\ys Phrase, typically\y 
a word or a series o\f le\ytters and numbers o\y\f a specified 
length you were asked to enter wh\yen you set up secur\yity \for 
your wireless network\b I\f yo\yu use this method o\y\f setting up 
the network connec\ytion, and have a Se\ycurity Key \for your \y
wireless network, you \ywill have to enter\y the Pass Phrase 
during the setup pr\yocess\b
How	to	set	up	automatically
To set up the wireless connection a\yutomatically, \follo\yw these 
steps:
1.	Follow Steps 1 through 6 in the “How\y to set up using 
PBC (WPS)” (p\b 33)\b
2.	 Press the ▼ button to select \yInternet	Protocol	Setup, 
and then press the ENTER
E button\b Press the ▲ or 
▼ button to select \yAuto, and then press the ENTERE 
button\b
3.	 Press the ▲ button to go to Select	a	Network, and 
then press the ENTER
E button\b The Network \function 
searches \for available \ywireless networks\b Whe\yn done, it 
displays a list o\f t\yhe available netwo\yrks\b
4.	 In the list o\f netw\yorks, press the ▲ or ▼ button to select \y
a network, and then\y press the ENTER
E button\b
 
✎I\f the AP is set to Hidden (Invisible), you have 
to select A\f\f	Network and enter the correct 
Network	Name	(SSID) and Security	Key to 
establish the connection\b 5.	
I\f the Security/PIN \ypop-up appears, go\y to Step 6\b I\f the 
Network Connecting\y Screen appears, go to\y Step 10\b
6.	 Press the ▲ or ▼ button to select \ySecurity or PIN\b For 
most home networks\y, you would select \ySecurity (\for 
Security	Key)\b The Security Screen appears\b
7.	 On the Security screen, enter your net\ywork’s Pass 
Phrase\b 
 
✎You should be able to \find the Pass Phrase on 
one o\f the set up screens you used to set up your 
router or modem\b
8.	 To enter the Pass P\yhrase, \follow these\y general 
directions:
 
– Press the number but\ytons on your remote to enter 
numbers\b
 
– Use the direction buttons on \yyour remote to move 
\from button to butto\yn on the Security	Key screen\b
 
– Press the Red button \yto change case or \ydisplay 
symbols/characters\b\y
 
– To a enter letter o\yr symbol, move to t\yhe letter or 
symbol, and then pr\yess the ENTER
E button\b
 
– To delete the last l\yetter or number you\y entered, press 
the Green button on your \yremote\b
9.	 When done, press the Blue butto\yn on your remote\b The 
Network Connecting\y screen appears\b
10.	 Wait until the conn\yection confirmation\y message is 
displayed, and then \ypress the ENTER
E button\b The 
Network	Setup screen re-appears\b
11.	 To test the connect\yion, press the RETURN button to 
select Network	Test, and then press the ENTER
E 
button\b
Network Setup
 PBC(WPS)  U Move  E Enter  R Return
Select a Network   : Not Selected ►
Internet Protocol Setup   : Auto 
IP Address   : 
   
Subnet Mask  :    
Gateway  :    
DNS  : Auto
DNS Server   : 
   
ABCDEFG
HIJKLMN
OPQRS\fU
VW\bYZ
0~9
Network Setup
n Move  E Enter  R Return
Security Key
0 enteredNumber
 
 Lower case
 
 Delete
 
 Space
[N-Euro]BN68-02590E-03L05.indb   342010-05-17   오후 5:43:52Downloaded From TV-Manual.com ManualL 
						

							35English
04A\fvance\f	FeaturesNetwork	Setup	(A\f-Hoc)
You can connect to \ya mobile device wit\yhout an access poi\ynt 
through the “Samsung W\yireless LAN Adapter” \yby using a 
peer to peer netwo\yrk\b
 
✎This \function is available when SWL(Samsung	
Wireless	Link) is set to Off \b
How	to	connect	to	new	A\f-hoc	\fevice
1.	 Follow Steps 1 through 6 in the “How\y to set up using 
PBC (WPS)” (p\b 33)\b \y
2.	 Choose Select	a	Network\b A list o\f devices/\ynetworks 
appears\b 
3.	 While in the device\y list, press the Blue butto\yn on the 
remote\b
 
✎The message A\f-hoc	is	a	\firect	Wi-Fi	
connection	with	cell	phone	or	P\b. The	existing	
network	system	may	have	limite\f	functionality.	
Do	you	want	to	change	the	network	
connection? is displayed\b
4.	 Input the generate\yd Network	Name	(SSID) and 
Security	Key into the device yo\yu want to connect\b
How	to	connect	an	existing	A\f-hoc	\fevice
1.	 Follow Steps 1 through 6 in the “How\y to set up using 
PBC (WPS)” (p\b 33)\b \y
2.	 Choose Select	a	Network\b The Device/Networ\yk list 
appears\b 
3.	 Select the device yo\yu want in the Devi\yce list\b 
4.	 I\f security key is r\yequired, input the secur\yity key\b
 
✎I\f network doesn’t operate normally, check 
the Network	Name	(SSID) and Security	Key 
again\b An incorrect Security	Key may cause a 
mal\function\b
Network	Setup	(Manual)
I\f the other method\ys do not work, you \yneed to enter the 
Network setting va\ylues manually\b
Getting	the	Network	\bonnection	Values
To get the Network \yconnection values \yon most Windows 
computers, \follow t\yhese steps:
1.	 Right click the Ne\ytwork icon on the \ybottom right o\f the\y 
screen\b
2.	 In the pop-up menu\y, click Status\b
3.	 On the dialog that \yappears, click the\y Support tab\b
4.	 On the Support tab,\y click the Details\y button\b The 
Network settings a\yre displayed\b
How	to	set	up	manually
To enter the Networ\yk connection value\ys manually, \follow \y
these steps:
1.	 Follow Steps 1 through 6 in the “How\y to set up using 
PBC (WPS)” (p\b 33)\b
2.	 Press the ▼ button to select \yInternet	Protocol	Setup, 
and then press the ENTER
E button\b Press the ▲ 
or ▼ button to select \yManual, and then press the 
ENTER
E button\b
3.	 Press the ▼ button to go to t\yhe first entry field \y(IP 
Address)\b
4.	 Use the number but\ytons to enter numb\yers\b
5.	 When done with each\y field, use the ► button to move 
successively to the\y next field\b You can also use th\ye other 
arrow buttons to move\y up, down, and back\y\b
6.	 Enter the IP	A\f\fress, Subnet	Mask, and Gateway 
values\b
7.	 Press the ▲ or ▼ button to go to DNS\b
8.	 Press the ▼ button to go to t\yhe first DNS entry fi\yeld\b 
Enter the numbers a\ys above\b
9.	 When done, press the ▲ button to go to Select	a	
Network\b Select your networ\yk, and then press the 
ENTER
E button\b
10.	 Go to Step 4 in the\y “How to set up au\ytomatically” (p\b 
34), and \follow the\y directions \from that point on\b
[N-Euro]BN68-02590E-03L05.indb   352010-05-17   오후 5:43:52Downloaded From TV-Manual.com ManualL 
						

							36English
Ad\fanced Features
SWL(Samsung	Wireless	Link)
This \function lets \yyou connect a Samsu\yng device that 
supports the PBC (WPS) to your TV\b You can connect 
devices to the TV e\yven i\f a sharer is not connecte\yd to the TV\b
 
✎To use the Internet@T V, the AP (access point) must be 
connected to the wireless network\b
 
✎I\f a Samsung Wireless L AN Adapter is connected to the 
USB	2 port, the network may not operate normally\b We 
recommend to connecting it to the USB	1	(HDD) port\b
 
✎Only sharers using the 2\b4 Ghz band are supported\b 
Sharers using the 5 Ghz band are not supported\b
SWL	connect
You can directly connect a dev\yice that supports \ythe PBC 
(WPS) to the TV\b
 
✎This \function is available when SWL(Samsung	
Wireless	Link) is set to On \b
How	to	connect	Samsung	Wireless	Link
For the procedures to establish a \yconnection, re\fer to the 
\following:
1.	 Follow Steps 1 through 5 in the “How\y to set up using 
PBC (WPS)” (p\b 33)\b
2.	 Select SWL(Samsung	Wireless	Link) by using the ▼ 
button and press the ENTER
E button to turn it On\b
3.	 Select SWL	connect by using the ▼ button and press 
the ENTER
E button\b
4.	 I\f the “Press	the	PB\b	button	on	the	PB\b(WPS)	
supporte\f	\fevice	to	connect	within	120	secon\fs.” 
message appears, p\yress the PBC button\y on the device 
to connect\b
 
✎For more in\formation, re\fer to the wireless network 
setup manual o\f the device to be connected\b 
5.	 I\f the device is co\ynnected properly to the TV a\f\yter 
starting count on \ymessage box then m\yessage box will 
be disappeared automatically\b
 
✎I\f the connection \fails, please retry a\fter 2 minutes\b
If	Your	TV	Fails	to	\bonnect	to	the	Internet
Your TV may not be a\yble to connect to \ythe Internet because 
your ISP has perman\yently registered the MAC address (a 
unique identi\fying n\yumber) o\f your PC o\yr modem, which it 
then authenticates\y each time you conn\yect to the Internet as 
a way o\f preventing unauthori\yzed access\b As your \yTV has 
a di\f\ferent MAC address, your ISP can n\yot authenticate it\ys 
MAC address, and your TV ca\yn not connect\b
To resolve this problem, ask your ISP\y about the procedures 
required to connect devic\yes other than a PC\y (such as your 
TV) to the Internet\b
I\f your Internet service provider requires an ID or passwo\yrd 
to connect to the \yInternet, your TV may no\yt be able to 
connect to the Int\yernet\b I\f this is the\y case, you must ent\yer 
your ID or password when connecting t\yo the Internet\b
The internet connection may \y\fail because o\f a fi\yrewall 
problem\b I\f this is t\yhe case, contact yo\yur Internet service 
provider\b 
I\f you cannot conne\yct to the Internet even a\fter you \yhave 
\followed the procedures o\f your Internet service provider, 
please contact Sams\yung Electronics at 1-800-SAMS\yUNG\b
  
[N-Euro]BN68-02590E-03L05.indb   362010-05-17   오후 5:43:53Downloaded From TV-Manual.com ManualL 
						

							37English
04A\fvance\f	FeaturesMe\bia Play
	
¦ \bonnecting	a	USB	De\hvice
1.	 Turn on your TV\b
2.	 Connect a USB devic\ye containing recorded tv, photo, musi\yc and/or movie fi les to 
the USB	1	(HDD) or USB	2 jack on the side o\y\f the TV\b
3.	 When USB is connect\yed to the TV, popup window appe\yars\b Then you can s\yelect 
Me\fia	Play\b
	
¦ \bonnecting	to	the	P\b	\hthrough	network
You can play pictures, music and video\ys saved on your PC \ythrough a network con\ynection in the Me\fia	Play mode\b 
 
✎I\f you use  Me\fia	Play through saved \file on your PC, you should download “PC Share Manager” and users manual \from 
“www\bsamsung\bcom\b”
1.	 For more in\formation on ho\yw to confi gure your network, re\fer to “Network Co\ynnection” (p\b 30)\b
 
– You are recommended to locat\ye both TV and PC in\y same subnet\b The fi\y rst 3 parts o\f the \ysubnet address o\f the TV and 
the PC IP addresses should be the\y same and only the \ylast part (the hos\yt address) should be chan\yged\b (e\bg\b IP Address: 
123\b456\b789\b**)
2.	 Using a LAN cable,\y connect between t\yhe external modem and the P\yC onto which the Sa\ymsung PC Share Manager 
programme will be in\ystalled\b
 
– You can connect the\y TV to the PC directly without conne\ycting it through a Sharer (Router)\b
Enjoy recorded tv, photos, mus\yic and/or movie 
fi les saved on a USB \yMass Storage Class \y(MSC) 
device and/or your P\yC\bMEDIA.P
USB Drive
TV Rear Panel
(HDD
)
or
LAN Adapter LAN Cable
LAN Cable
LAN Cable
LAN Cable PC
TV Rear Panel
(HDD)orLAN
Samsung Wireless
LAN Adapter
Wireless IP Sharer
External Modem
(ADSL/VDSL/Cable TV\y)
SUM Change Device View Devices  E Enter  R Return
MediaPlay
Recorded TV
Modem Cable
[N-Euro]BN68-02590E-03L05.indb   372010-05-17   오후 5:43:55Downloaded From TV-Manual.com ManualL 
						

							38English
Ad\fanced Features
 
✎No supported \functions when connecting to the PC through network:
 
xThe Backgroun\f	Music and Backgroun\f	Music	Setting \functions\b
 
xSorting \files by pre\ference in the Photos , Music, and Vi\feos \folders\b
 
xThe � (REW) or µ (FF) button while a movie is playing\b
 
✎The Divx DRM, Multi-audio, embedded caption does not supported\b
 
✎Samsung PC Share manager should be permitted by the \firewall programme on your PC\b
 
✎When you use Me\fia	Play mode through a network connection, According to \functions o\f the provided server:
 
xThe sorting method may vary\b
 
xThe scene search \function may not be supported\b
 
xThe Play	\bontinuously \function, which resumes playing o\f a video, may not be supported\b
 
– The Play	\bontinuously \function does not \ysupport multiple u\ysers\b (It will have\y only memorised the\y point where the 
most recent user stopped \yplaying\b)
 
xThe ◄ or ► button may not work depending on the content in\formation\b
 
xYou may experience \file stuttering while playing a video in Media Play through a network connection\b
 
✎It might not work properly with unlicenced multimedia \files\b
 
✎Need-to-Know List be\fore using Me\fia	Play
 
xMTP (Media Trans\fer Protocol) is not supported\b
 
xThe \file system supports FAT16, FAT32 and NTFS\b
 
xCertain types o\f USB Digital camera and audio devices may not be compatible with this T V\b
 
xMedia Play only supports USB Mass Storage Class (MSC) devices\b MSC is a Mass Storage Class Bulk-Only 
Transport device\b Examples o\f MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not 
supported)\b Devices should be connected directly to the T V’s USB port\b 
 
xBe\fore connecting your device to the T V, please back up your \files to prevent them \from damage or loss o\f data\b 
SAMSUNG is not responsible \for any data \file damage or data loss\b
 
xConnect a USB HDD to the dedicated port, USB	1	(HDD) port\b
 
xDo not disconnect the USB device while it is loading\b
 
xThe higher the resolution o\f the image, the longer it takes to display on the screen\b
 
xThe maximum supported JPEG resolution is 15360X8640 pixels\b
 
xFor unsupported or corrupted \files, the “Not Supported File Format” message is displayed\b
 
xI\f the \files are sorted by Basic View, up to 1000 \files can be displayed in each \folder\b
 
xMP3 \files with DRM that have been downloaded \from a non-\free site cannot be played\b Digital Rights Management 
(DRM) is a technology that supports the creation o\f content, the distribution and management o\f the content in an 
integrated and comprehensive way, including the protection o\f the rights and interests o\f the content providers, the 
prevention o\f the illegal copying o\f contents, as well as managing billings and settlements\b
 
xI\f more than 2 PTP devices are connected, you can only use one at a time\b
 
xI\f more than two MSC devices are connected, some o\f them may not be recognized\b A USB device that requires high 
power (more than 500mA or 5V) may not be supported\b
 
xI\f an over-power warning message is displayed while you are connecting or using a USB device, the device may not 
be recognized or may mal\function\b
 
xI\f the T V has been no input during time set in Auto	Protection	Time , the Screensaver will run\b
 
xThe power-saving mode o\f some external hard disk drives may be released automatically when connected to the T V\b
 
xI\f a USB extension cable is used, the USB device may not be recognized or the \files on the device may not be read\b
 
xI\f a USB device connected to the T V is not recognized, the list o\f \files on the device is corrupted or a \file in the list is 
not played, connect the USB device to the PC, \format the device and check the connection\b
 
xI\f a \file deleted \from the PC is still \found when Media Play is run, use the “Empty the Recycle Bin” \function on the PC 
to permanently delete the \file\b
[N-Euro]BN68-02590E-03L05.indb   382010-05-17   오후 5:43:55Downloaded From TV-Manual.com ManualL 
						

							39English
04A\fvance\f	Features	
¦ Screen	Display
Move to the file you\y desired using the up/dow\yn/right/le\ft button\ys and then press the ENTERE or � (Play) button\b The\y file is 
played\b
 
✎Supports the View	Devices and Home in Me\fia	Play homepage\b
 
Recor\fe\f	TV
To use the recording or Timeshift	Mo\fe \function, the conn\yected USB device mus\yt be available \for \yrecording\b Device	format 
is recommended to use U\ySB HDD\b
 
✎During the Device \formatting, do not disconnect the device while \formatting is in progress\b I\f you \format the device, all 
\files will be deleted\b
 
✎Be\fore \formatting your device to the tv, please back up your \files to prevent them \from damage or loss o\f data\b 
SAMSUNG is not responsible \for any data \file damage or data loss\b
Playing	Recor\fe\f	TV	Programme
1.	 Press the ◄ or ► button to select \yRecor\fe\f	TV, then press 
the ENTERE button in the Me\fia	Play menu\b
2.	 Press the ◄/►/▲/▼ button to select \ythe desired file in the file 
list\b
3.	 Press the ENTER
E button or � (Play) button\b
 
– The selected file is\y displayed on the to\yp with its playing \ytime\b
 
– During playing the \yrecorded TV programme, you can se\yarch 
using the ◄ and ► button\b
Operation	Buttons
B Green ( Section 	Repeat ): You can set up the \fuction to repeat some section\b 
You can also watch some section you want to\b
Movie 01.avi 00:04:03 / 00:07:3\
8
1/1
SUM Section Repeat   Play continuously E Chaptering L Jump T Tools 
Resumes playing from the last viewed 
scene. Play continuously
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
Jan.10.2010
/Movie 01.avi
1/1
Movie 01.avi
SUM Movie 03.avi
Movie 05.avi
Movie 07.avi
Movie 0\f.avi
Movie 02.avi
Movie 04.avi
Movie 06.avi
Movie 08.avi
Movie 10.avi
 Select   Sorting  T Tools
In\formation:
You can ascertain the selected 
file name and the number o\f files  and page\b
Sort List Section:
Displays sorting standard\b
 
✎Sorting standard is 
di\f\ferent depending on the 
contents\b
Operation Buttons
 Red (\bhange 	Device ): Selects a connected device\bB Green ( Preference ): Sets the file pre\ference\b (not supported in Basic view) Yellow (Select): Selects multiple files \from file list\b Selected files are marked with a symbol\b Blue (Sorting ): Selects the sort list\bT Tools : Displays the option menu\b
 
✎Using the (REW) � or µ (FF) button, file list can move to next or previous page\b
File List Section:
You can confirm the files 
and groups that is sorted by 
each category\b
Vi\feosPage
  \bhange	Device
[N-Euro]BN68-02590E-03L05.indb   392010-05-17   오후 5:43:57Downloaded From TV-Manual.com ManualL 
						

							40English
Ad\fanced Features
Using	the	Timeshift	Mo\fe	function	t
I\f you missed a live\y broadcast, you can se\ye \from the recorded broadcast using this \y\feature\b
When the Timeshift	Mo\fe is set to Auto, the TV stores the channel you \ywatch currently to record automatically\b
When the Timeshift	Mo\fe is set to Manual, i\f you press the 
� (Play) button, the\y TV stores the channel \from the point o\f 
view you want to record\b
 
✎NOTE
 
xRecorded videos are DRM (digital rights management) protected and cannot be played on a PC or other T Vs, nor can 
they be played when the main board o\f the T V is changed\b
 
xData broadcasts cannot be recorded\b
 
xThe availability o\f both recording and the Timeshift	Mo\fe \function may di\f\fer depending on picture quality and the 
\free space on the hard disk drive\b
 
xI\f you press the ▲ or ▼ button, you can see the current channel being on air, or can see the start point the recorded 
broadcast\b
 
xThe Timeshift	Mo\fe operates \for a maximum o\f 90 minutes\b
 
xA\fter the Timeshift	Mo\fe \function has run \for the maximum time, the time in\formation will be \fixed to “00:00:00\b” 
Note that i\f you have paused the recording the T V will automatically resume playback\b
 
xI\f the 5% \free memory space limit o\f the USB storage device is reached, the current recording process will be closed\b
 
xWhen recording is per\formed by both the PVR (Personal Video Recorder) \function and a device that supports the 
HDMI-CEC \feature, recording by the PVR \function takes precedence\b
 
xDuring a playback or the Timeshift	Mo\fe , the picture will be displayed according to the display settings o\f the T V\b
 
xI\f you change the input source during recording, the screen will go blank until the change is completed\b
 
xAn application which supports neither the recording nor the Timeshift	Mo\fe \function will close automatically i\f you 
try to use it during either \function\b
 
xA message may appear in \front o\f the application window indicating that the recording or the Timeshift	Mo\fe 
\function is closed\b
 
xTimeshift	Mo\fe \function is not supported \for analogue channels\b
 
xThe recording and the Timeshift	Mo\fe \functions are disabled \for channels locked with \bhil\f	Lock \b
 
xI\f the USB device has \failed the Device	Performance	Test , the USB device must go through the Device	Format and 
Device	Performance	Test again be\fore you record with the Gui\fe or \bhannel	Manager \b
 
xThe recording and Timeshift	Mo\fe \functions can only be used with a USB storage device that completed the 
Device	Performance	Test \b
 
xI\f you attempt the recording or Timeshift	Mo\fe \function with a device that did not have the Device	Performance	
Test , the \function will not start\b
 
xI\f you press � (REC) on the remote control while the \bhannel	Manager screen is being displayed or record with 
Timer	Recor\fing , the T V may start or stop recording 1 or 2 seconds later than you intended due to the time needed 
to process the command\b
 
xI\f a USB device dedicated to recording is connected, existing Timeshift	Mo\fe or recording \files that were saved 
abnormally will automatically be deleted\b
 
xI\f you switch to external input mode during recording, the recording will continue but the � (REC) button will be 
disabled\b
 
xI\f any \function that turns o\f\f the T V ( Sleep	Timer, O\f\f timer, etc\b) is set \for a time that con\flicts with recording, the T V 
will be turned o\f\f once the recording is complete\b
[N-Euro]BN68-02590E-03L05.indb   402010-05-17   오후 5:43:57Downloaded From TV-Manual.com ManualL