Samsung UE 40C7000 User Manual
Have a look at the manual Samsung UE 40C7000 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
21English 03 Basic Features3D This exciting new \bfeature enables \fou to view 3\b content. In \border to full\f enjo\f \b this feature, \fou must purchase a pair of Samsung 3\b Active \bGlasses (SSG- 2100AB, SSG-2200AR, \bSSG-2200KR) to view 3\b video. Samsung 3\b Active Gla\bsses are sold separatel\f. For mor\be detailed purchasing information, conta\bct the retailer where \fou purchased this TV. ✎If there is an\f obstacle between the emitter and 3\b Active Glasses, the proper 3\b effect ma\f not be obtained. ■3D Mode : Select the 3\b inpu\bt format. ✎If \fou want to feel the 3\b effect full\f, please wear the 3\b Active Glasses first, and then select 3D Mode from the list below that provides the best 3\b viewing experience. ✎When watching 3\b im\bages, turn on 3\b Active Glasses. 3D Mode Operatio\f Off Turns the 3\b function \boff. 2D → 3DChanges a 2\b image \bto 3\b. Side \by Side\bispla\fs two images\b next to each other. Top & Bottom\bispla\fs one image \babove another. Li\fe \by Li\fe\bispla\fs the images\b for the left and right e\fe alter\bnatel\f in rows. Vertical Stripe\bispla\fs the images\b for the left and right e\fe \balternatel\f in columns. Checker Board\bispla\fs the images\b for the left and right e\fe \balternatel\f in pixels. Freque\fcy \bispla\fs the images\b for the left and right e\fe \balternatel\f in frames. ✎“ Side b\f Side” and “Top & Bottom” are available when the resolution is 720p, 1080i and 1080p in DT V, HDMI and USB mode or set to PC connecting through H\bMI/\bVI cable. ✎“Vertical Strip”, “Line b\f Line” and “Checker Board” are available when the resolution is set to PC connecting through H\bMI/\bVI cable. ✎“Frequenc\f” displa\fs the frequenc\f (60Hz onl\f) when the resolution is set to PC. ■ 3D → 2D (Off / O\f): \bispla\fs the imag\be for the left e\fe \b onl\f. ✎This function is deactivated when 3D Mode set to “2\b → 3\b” or Off . ■3D V iew poi\ft: The overall adjus\btment of 3\b perspective. ✎This function is deactivated when 3D Mode set to “2\b → 3\b” or Off . ■Depth : Adjusts focus / \bdepth in “2\b → 3\b” mode. ✎This function is onl\f activated when the 3D Mode is “2\b → 3\b”. ■ Pictur e Correctio\f: Adjusts the imag\bes for the left an\bd right e\fe. ■ 3D Auto V iew (Off / O\f): If 3D Auto View is set to O\f, a “Side b\f Side” form\bat H\bMI signal with\b one of the resolutions below is\b automaticall\f swit\bched to 3\b. Here, correct 3\b information \bmust be sent from the Standard H\bMI 3\b Format. ✎If a 3\b failure occurs due to a 3\b information error, set 3D Auto View to Off and manuall\f select a 3D Mode using the 3D button or corresponding menu. ✎Support resolution (16:9 onl\f) Resolutio\f Freque\fcy (Hz) 1280 x 720p 50 / 60 Hz 1920 x 1080i 50 / 60 Hz 1920 x 1080p 24 / 30 / 50 / 60 H\bz ■ 3D Optimisatio\f : The overall adjus\btment of 3\b effect. Resolutio\f supported\p for HDMI PC mode The resolution for H\bMI \bPC mode is optimiz\bed to 1920 x 1080 input. An input resolution other th\ban 1920 x 1080 ma\f \bnot be displa\fed properl\f in 3\b displa\f\b or full screen mode. 3\b emitter 1_BN68-02590B-03Eng.indd 212010-05-18 오전 11:38:47
22English Basic Features How to watch the 3D image 1. Press the \bONTENT button, then the \y\bontent View menu will appear\b 2. Press the ◄ or ► button, then sele\yct 3D\b To watch in 3D, wea\yr 3D Active Glasse\ys and press the power button on th\ye glasses\b 3. Select OK, then press the ENTER E button\b 4. Using the ◄ or ► buttons on your remote control, selects the 3D Mo\fe o\f the image you w\yant to view\b ✎Some 3D modes may not be available depending on the \format o\f the image source\b Supporte\f formats an\f operating specifications for Stan\far\f HDMI 3D ✎The 3D \formats indicated below are recommended by the HDMI association and must be supported\b Source signal format Stan\far\f HDMI 1.4 3D 1920x1080p@24Hz x 2 1920x2205p@24Hz 1280x720p@60Hz x 2 1280x1470p@60Hz 1280x720p@50Hz x 2 1280x1470p@50Hz The mode is automat\yically switched to \y3D mode \for the 3D \y video input in one \yo\f the \formats abov\ye\b For the Standard HDMI 3D \format wi\yth 24Hz, the TV is\y optimized as \follow\ys: – Resolution First Display Mo\fe: I\f Motion Plus is set to Off, \blear or Stan\far\f, you can watch the\y video at a high resolution optimize\yd to the resolution o\f the source video\b – Ju\f\fer Re\fuction Display Mo\fe: When Motion Plus is set to Smooth or \bustom, you can watch a smooth pic\yture without judder\b Before using 3D function... ✎NOTE xYou may notice a small amount o\f screen \flickering when watching 3D images in poor light conditions (\from a strobe light, etc\b), or under a \fluorescent lamp (50Hz ~ 60Hz) or 3 wavelength lamp\b I\f so, dim the light or turn the lamp o\f\f\b x3D mode is automatically disabled in \following cases: when changing a channel or the input source, or accessing Me\fia Play or Internet@T V \b xSome Picture \functions are disabled in 3D mode\b xPIP and Data broadcasts (MHEG / MHP) are not supported in 3D mode\b x3D Active Glasses \from other manu\facturers may not be supported\b xWhen the T V is initially powered on, may take some time until the 3D display is optimized\b xThe 3D Active Glasses may not work properly i\f there is any other 3D product or electronic devices turned on near the glasses or T V\b I\f there is a problem, keep other electronic devices as \far away as possible \from the 3D Active Glasses\b xWhen watching pictures \from a 50Hz 3D source with its Game mode On, visually-sensitive viewers may see some \flicker on bright images\b xPhotos o\f Me\fia Play are shown in “2D → 3D” mode only\b xI\f you lie on your side while watching T V with 3D active glasses, the picture may look dark or may not be visible\b xBe sure to stay within the viewing angle and optimum T V viewing distance when watching 3D pictures\b – Otherwise, you may \ynot be able to enj\yoy proper 3D e\f\fects\b xThe ideal viewing distance should be three times or more the height o\f the screen\b We recommend sitting with viewer’s eyes on a level with the screen\b 3D OK To watch in 3D, wear 3D glasses and press the power button on the glasses. Viewing 3D TV motion pictures for long periods may cause eye fatigue and/or dizziness. Cancel L Move E Enter e Exit 3D3D Using the LEFT / RIGHT keys on the remote control, select the icon suitable for the picture on screen.Using the LEFT / RIGHT keys on the remote control, select the icon suitable for the picture on screen. L Move E Enter e ExitL Move E Enter e Exit [N-Euro]BN68-02590E-03L05.indb 222010-05-17 오후 5:43:43Downloaded From TV-Manual.com ManualL
23English 03Basic FeaturesPicture Reset (OK / \bancel) Resets your current picture mode to its de\faul\yt settings\b ¦ Setting up the TV with Your P\b Set the input source to PC\b Auto A\fjustment t Adjust \frequency values/posi\ytions and fine tune \ythe settings automatically\b ✎Not available when connecting with an HDMI/DVI cable\b Screen ■ \boarse / Fine: Removes or reduces picture noise\b I\f the noise is not removed by Fine-tuni\yng alone, then adju\yst the \frequency as best as \ypossible (\boarse) and Fine- tune again\b A\fter t\yhe noise has been \yreduced, readjust the picture so that it is al\yigned to the centre o\f screen\b ■ Position: Adjust the PC scr\yeen position with \ydirection button (▲ / ▼ / ◄ / ►)\b ■ Image Reset: Resets the image\y to de\fault setting\ys\b Using Your TV as a \bomputer (P\b) Display Setting Up Your PC So\ftware (Based on Windows XP) Depending on the ve\yrsion o\f Windows and the video\y card, the actual screens on your PC may\y di\f\fer in which case t\yhe same basic set-up \yin\formation will al\ymost always be appl\yied\b (I\f not, contact yo\yur computer manu\fac\yturer or Samsung Dealer\b) 1. Click on “Control Panel” on the W\yindows start menu\b \y 2. Click on “Appearan\yce and Themes” in t\yhe “Control Panel” window and a\y display dialog-box \ywill appear\b 3. Click on “Display” \yand a display dialog\y box will appear\b 4. Navigate to the “Se\yttings” tab on the\y display dialog-box\b\y y The correct size setting (\yresolution) [Optimu\ym: 1920 X 1080 pixels] y I\f a vertical-\frequency option exis\yts on your display settings dialog box\y, the correct value is “60” \yor “60 Hz”\b Otherwise, just cl\yick “OK” and exit t\yhe dialog box\b Soun\b Menu ¦ \bhanging the Preset Soun\f Mo\fe SRS TheaterSoun\f t ■ Stan\far\f: Selects the norma\yl sound mode\b ■ Music: Emphasizes music \yover voices\b ■ Movie: Provides the best sou\ynd \for movies\b ■ \blear Voice: Emphasizes voices\y over other sounds\b\y ■ Amplify: Increase the intensity \yo\f high-\frequency sound to allow a better \ylistening experien\yce \for the hearing \y impaired\b ¦ A\fjusting Soun\f Settings Equalizer Adjusts the sound m\yode (standard sound mode only)\b ■ Balance L/R: Adjusts the balan\yce between the rig\yht and le\ft speaker\b ■ 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjust\ys the level o\f spec\yific bandwidth \frequencies\b ■ Reset: Resets the equal\yizer to its de\fault\y settings\b ¦ Soun\f Systems, Etc. SRS TruSurroun\f HD (Off / On) t (standard sound mode only) This \function provides a virtual 5\b\y1 channel surround sound experience through a pair o\f spea\ykers using HRTF (Head Related Trans\fer Function) t\yechnology\b SRS TruDialog (Off / On) (standard sound mode only) This \function allow\ys you to increase the intensity \yo\f a voice over background music or sound\y e\f\fects so that dialo\yg can be heard more clearly\b [N-Euro]BN68-02590E-03L05.indb 232010-05-17 오후 5:43:43Downloaded From TV-Manual.com ManualL
24English Basic Features Au\fio Language (digital channels o\ynly) Change the de\fault \yvalue \for audio lan\yguages\b ✎The available language may di\f\fer depending on the broadcast\b Au\fio Format (digital channels o\ynly) When sound is emitt\yed \from both the main s\ypeaker and the audio receiver, a sound echo may \yoccur due to the de\ycoding speed di\f\ference between the m\yain speaker and the\y audio receiver\b In this case, use\y the TV Speaker \fun\yction\b ✎Au\fio Format option may di\f\fer depending on the broadcast\b 5\b1ch Dolby digital sound is only available when connecting an external speaker through an optical cable\b Au\fio Description (not available in \yall locations) (dig\yital channels only) This \function handl\yes the Audio Stream \for the AD (Audio Description)\y which is sent along with th\ye Main audio \from the broadcaster\b ■ Au\fio Description (Off / On): Turn the audio descripti\yon \function on or o\f\f\b ■ Volume: Adjust the audio \ydescription volume\b\y Auto Volume (Off / Normal / Night) To equalize the vol\yume level on each \ychannel, set to Normal\b ■ Night: This mode provides an improved sound experience compared to Normal mode, making almos\yt no noise\b It is use\y\ful at night\b Speaker Select (External Speaker / TV Speaker) A sound echo may oc\ycur due to a di\f\ference in decoding speed between the m\yain speaker and the\y audio receiver\b In this case, set the\y TV to External Speaker. ✎When Speaker Select is set to External Speaker , the volume and MUTE buttons will not operate and the sound settings will be limited\b ✎When Speaker Select is set to External Speaker xT V Speaker: Off, External Speaker: On ✎When Speaker Select is set to T V Speaker xT V Speaker: On, External Speaker: On ✎I\f there is no video signal, both speakers will be mute\b A\f\fitional Setting (digital channels o\ynly) ■ DTV Au\fio Level (MPEG / HE-AA\b): This \function allows you to reduce the disparity \yo\f a voice signal (which is one o\f th\ye signals received during a dig\yital TV broadcast) to a desir\yed level\b ✎According to the type o\f broadcast signal, MPEG / HE-A A\b can be adjusted between -10dB and 0dB\b ✎To increase or decrease the volume, adjust between the range 0 and -10 respectively\b ■ SPDIF Output: SPDIF (Sony Philip\ys Digital InterFac\ye) is used to provide digital sound,\y reducing inter\ference going to speakers \yand various digital\y devices such as a \y DVD player\b Au\fio Format: During the reception o\f a digit\yal TV broadcast, you can se\ylect the Digital A\yudio output (SPDIF) \format \from the options P\bM or Dolby Digital\b Au\fio Delay: Correct audio-video sync\y problems, when watching TV or vide\yo, and when listeni\yng to digital audio\y output using an ex\yternal device such as \yan AV receiver (0ms ~ 250ms)\b ■ Dolby Digital \bomp (Line / RF): This \function minimizes signal disparity be\ytween a dolby digita\yl signal and a voice signal (i\be\b \yMPEG Audio, HE-AAC, \yATV Sound)\b ✎Select Line to obtain dynamic sound, and RF to reduce the di\f\ference between loud and so\ft sounds at night time\b Line: Set the output le\yvel \for signals greater or less than\y -31dB (re\ference) to either -2\y0dB or -31dB\b RF: Set the output le\yvel \for signals greater or less than\y -20dB (re\ference) to either -1\y0dB or -20dB\b AD [N-Euro]BN68-02590E-03L05.indb 242010-05-17 오후 5:43:44Downloaded From TV-Manual.com ManualL
25English 03Basic FeaturesSoun\f Reset (OK / \bancel) Reset all sound set\ytings to the \factor\yy de\faults\b ¦ Selecting the Soun\f Mo\fe t When you set to Dual f-g, the current sound mode is displayed on the scr\yeen\b Audio Type Dual f-g De\fault A2 Stereo Mono Mono Automatic change Stereo Stereo ↔ Mono Dual Dual f ↔ Dual g Dual f NICAM Stereo Mono Mono Automatic change Stereo Mono ↔ Stereo Dual Mono ↔ Dual f Dual g Dual f ✎I\f the stereo signal is weak and an automatic switching occurs, then switch to the mono\b ✎Only activated in stereo sound signal\b ✎Only available when the Input source is set to T V \b Setup Menu ¦ Setting the Time Time ■ \block: Setting the clock\y is \for using vario\yus timer \features o\f the TV\b OThe current time will appe\yar every time you p\yress the INFO button\b ✎I\f you disconnect the power cord, you have to set the clock again\b \block Mo\fe (Auto / Manual) ✎Depending on the broadcast station and signal, the auto time set up may not be correct\b In this case, set the time manually\b ✎The antenna must be connected in order to set the time automatically\b \block Set: Set the Day, Month, Year, Hour and Minute manually\b ✎Available only when \block Mo\fe is set to Manual \b Time Zone (depending on the \ycountry): Select you\yr time zone\b ✎When \bountr y is set to Others , you can use this \function\b ✎This \function is only available when the \block Mo\fe is set to Auto \b ¦ Using the Sleep Timer ■ Sleep Timer t: Automatically shu\yts o\f\f the TV a\fter a preset period o\f time\y\b (30, 60, 90, 120,\y 150 and 180 minutes)\b ✎To cancel Sleep Timer , select Off\b ¦ Setting the On / Off Timer ■ Timer 1 / Timer 2 / Timer 3: Three di\f\ferent on / o\f\f timer settings can\y be made\b You must set the cl\yock first\b On Time / Off Time: Set the hour, minute, and activ\yate / inactivate\b (To activate timer w\yith the setting you\y’ve chosen, set to Activate\b) Volume: Set the desired volume level\b Source: Select TV or USB content to be pla\yyed when the TV is turned on automaticall\yy\b (USB can be selected only when a USB devi\yce is connected to \ythe TV) Antenna (when the Source is set to TV): Select ATV or DTV\b \bhannel (when the Source is set to TV): Select the desired channel\b \bontents (when the Source is set to USB): Select a \folder in the USB de\yvice containing mu\ysic or photo files \y to be played when t\yhe TV is turned on automaticall\yy\b ✎NOTE xI\f there is no music \file on the USB device or the \folder containing a music \file is not selected, the Timer \function does not operate correctly\b xWhen there is only one photo \file in the USB device, the Slide Show will not play\b xI\f a \folder name is too long, the \folder cannot be selected\b xEach USB you use is assigned its own \folder\b When using more than one o\f the same type o\f USB, make sure the \folders assigned to each USB have di\f\ferent names\b 10 TVATV 1 0000 0000 Timer 1On Time Off Time Volume Inactivate Inactivate Sun Mon TueWed Thu FriSatOnce Source AntennaChannel Repeat L Move U Adjust E Enter R Return [N-Euro]BN68-02590E-03L05.indb 252010-05-17 오후 5:43:44Downloaded From TV-Manual.com ManualL
26English Basic Features Repeat: Select Once, Every\fay, Mon~Fri, Mon~Sat, Sat~Sun or Manual to set at you conv\yenience\b I\f you select Manual, you \ycan set up the day \yyou want to activate the timer\y\b ✎The c mark indicates the day is selected\b ✎Auto Power O\f\f (available only when the T V is turned on by Timer): The T V will be automatically turned o\f\f a\fter 3 hours o\f being le\ft idle to prevent overheating\b ¦ Locking Programmes Security ✎The PIN input screen appears be\fore the setup screen\b ✎Enter your 4-digit PIN, the de\fault o\f which is “0-0-0-0”\b Change the PIN using the \bhange PIN option\b ■ \bhil\f Lock (Off / On): Lock channels in\y \bhannel Manager, to prevent unauthorized \yusers, such as children, \from watching unsuit\yable programme\b ✎Available only when the Input source is set to T V \b ■ Parental Lock (Depending on the \ycountry): Prevent unauthorized users,\y such as children, \from watching unsuitable programme with a use\yr-defined 4-digit PIN \y code\b I\f selected ch\yannel is locked, th\ye “ \” symbol will be displayed\b ■ Allow All: Unlock All TV ra\ytings (Not support\yed in Sweden)\b ✎You can block T V programs by set up rating in Parental Lock as the Children, Youth or Adult (Sweden only)\b ■ \bhange PIN: Change your perso\ynal ID number required to set up the TV\b ✎I\f you \forget the PIN code, press the remote control buttons in the \following sequence, which resets the PIN to “0-0-0-0”: POWER (o\f\f) → MUTE → 8 → 2 → 4 → POWER (on)\b ¦ Other Features Language ■ Menu Language: Set the menu lang\yuage\b ■ Teletext Language: Set a desired language \for tel\yetext\b ✎English is the de\fault in cases where the selected language is unavailable in the broadcast\b ■ Preference (Primary Au\fio Language / Secon\fary Au\fio Language / Primary Subtitle Language / Secon\fary Subtitle Language / Primary Teletext Language / Secon\fary Teletext Language): Select a language\y, which will be th\ye de\fault language when a ch\yannel is selected\b \y Subtitle Use this menu to s\yet the Subtitle mode\b ■ Subtitle (Off / On): Switches subtitle\ys on or o\f\f\b ■ Mo\fe (Normal / Hearing Impaire\f): Sets the subtitle\y mode\b ■ Subtitle Language: Sets the subtitle\y language\b ✎I\f the programme you are watching does not support the Hearing Impaire\f \function, Normal automatically activates even i\f the Hearing Impaire\f mode is selected\b ✎English is the de\fault in cases where the selected language is unavailable in the broadcast\b Network (Network Type / Network Setup / Network Test / SWL(Samsung Wireless Link) / SWL connect) For details on set \yup options, re\fer to the “Networ\yk Connection” instru\yctions (p\b 30)\b General ■ Game Mo\fe (Off / On): When connecting \yto a game console such as Pl\yayStation™ or Xbox™\y, you can enjoy a more realistic gaming ex\yperience by selecti\yng game mode\b ✎NOTE xPrecautions and limitations \for game mode – To disconnect the ga\yme console and conn\yect another external device, set Game Mo\fe to Off in the setup menu\b – I\f you display the T\yV menu in Game Mo\fe, the screen shakes slightl\yy\b xGame Mo\fe is not available when the input source is set to T V or P\b \b xA\fter connecting the game console, set Game Mo\fe to On \b Un\fortunately, you may notice reduced picture quality\b xI\f Game Mo\fe is On : – Picture mode is set to Stan\far\f and Soun\f mode is set to Movie\b – Equalizer is not available\b [N-Euro]BN68-02590E-03L05.indb 262010-05-17 오후 5:43:44Downloaded From TV-Manual.com ManualL
27English 03Basic Features ■ BD Wise (Off / On): Provides the optimal \ypicture quality \for Samsung DVD, Bl\yu-ray and Home Thea\ytre products which support BD Wise\b When BD Wise is turned On, the picture mode is automatic\yally changed to the\y optimal resolution\b ✎Available when connecting Samsung products that support BD Wise through a HDMI cable\b ■ Menu Transparency (Bright / Dark): Se t the Transparency o\f the menu\b ■ Melo\fy (Off / Low / Me\fium / High): Set so that a melody plays when th\ye TV is turned on or o\f\f\b ✎Melo\fy is disabled when FastStart is On \b ■ FastStart (Off / On): When the TV is p\yowered on, the screen will come on q\yuickly with this \fe\yature\b \bommon Interface ■ \bI Menu: This enables the\y user to select \from the CAM- provided menu\b Select \ythe CI Menu based o\yn the menu PC Card\b ■ Application Info: View in\formation on \ythe CAM inserted into the CI slot a\ynd on the “CI or CI\y+ CARD” which is inserted into the C\yAM\b You can install the\y CAM anytime whether the TV is \yon or o\f\f\b 1. Purchase a CI CAM modu\yle at your nearest dealer or by phone\b 2. Firmly insert the “\yCI or CI+ CARD” in\yto the CAM in the \y direction o\f the arrow\b 3. Insert the CAM wit\yh the “CI or CI+ C\yARD” into the common inter\face sl\yot, in the direction o\f the arrow so that it aligns par\yallel with the slo\yt\b 4. Check i\f you can se\ye a picture on a scrambled si\ygnal channel\b Wireless Remote \bontrol Turn wireless remote controls on or o\f\f or give permissio\yn to wireless remote controls\b ¦ Picture In Picture (PIP) PIP t You can watch the T\yV tuner and one ext\yernal video source simultaneously\b PIP (Picture-in-Picture) does not \functio\yn in the same mode\b ✎NOTE xFor PIP sound, re\fer to the Soun\f Select instructions\b xI\f you turn the T V o\f\f while watching in PIP mode, the PIP window will disappear\b xYou may notice that the picture in the PIP window becomes slightly unnatural when you use the main screen to view a game or karaoke\b xWhile Internet@T V is in operation, the PIP \function cannot be used\b xPIP settings Main picture Sub picture \bomponent, HDMI1/DVI, HDMI2, HDMI3, HDMI4, P\b TV ■ PIP (Off / On): Activate or deact\yivate the PIP \funct\yion\b ■ \bhannel: Select the channe\yl \for the sub-screen\b ■ Size ( Õ / à / À / Œ): Select a size \for\y the sub- picture\b ■ Position ( à / – / — / œ): Select a position\y \for the sub-picture\b ✎In Double (À, Œ) mode, Position cannot be selected\b ■ Soun\f Select (Main / Sub): You can choose the \y desired sound (Main / Sub) in PIP mode\b [N-Euro]BN68-02590E-03L05.indb 272010-05-17 오후 5:43:45Downloaded From TV-Manual.com ManualL
28English Basic Features Support Menu Self Diagnosis ✎Sel\f Diagnostic might take \few seconds, this is part o\f the normal operation o\f the T V\b ■ Picture Test (Yes / No): Use to check \for \ypicture problems\b ■ Soun\f Test (Yes / No): Use the built-in\y melody sound to check \for sound problems\b ✎I\f you hear no sound \from the T V’s speakers, be\fore per\forming the sound test, make sure Speaker Select is set to T V Speaker in the Soun\f menu\b ✎The melody will be heard during the test even i\f Speaker Select is set to External Speaker or the sound is muted by pressing the MUTE button\b ■ Signal Information: (digital channels\y only) HDTV channel’s reception quality is\y either per\fect or \ythe channels are unavailable\b Adju\yst your antenna to \y increase signal strength\b ■ Troubleshooting: I\f the TV seems t\yo have a problem, re\fer to this descri\yption\b ✎I\f none o\f these troubleshooting tips apply, contact the Samsung customer service centre\b Software Upgra\fe Software Upgra\fe can be per\formed v\yia a broadcasting signal or by networ\yk connection or dow\ynloading the latest\y firmware \from “www\bsamsung\bcom,” to a\y USB memory device\b \burrent Version the so\ftware already installed in th\ye TV\b ✎So\ftware is represented as “Year/Month/Day_Version”\b Installing the Latest Version ■ By USB: Insert a USB drive containing th\ye firmware upgrade file, downloaded \from “www\bsamsung\bcom,” into the TV\b Please be care\ful not to disconnect the powe\yr or remove the USB drive until upgrade\ys are complete\b The TV \ywill be turned o\f\f and on automatica\ylly a\fter completin\yg the firmware upgrade\b When so\ftwa\yre is upgraded, video\y and audio settings you have m\yade will return to their de\fault \y settings\b We advise you to to \ywrite down your set\ytings so that you can eas\yily reset them a\fter the\y upgrade\b ■ By Online: Upgrade the so\ftw\yare using the Internet\b ✎First, con\figure your network\b For detailed procedures on using the Network Setup, re\fer to the “Network Connection” instructions\b ✎I\f the internet connection doesn’t operate properly, the connection may be broken\b Please retry downloading\b I\f the problem persists, download by USB and upgrade\b ■ By \bhannel: Upgrade the so\ftw\yare using the broadcasting signal\b ✎I\f the \function is selected during the so\ftware transmission period, so\ftware will be automatically searched and downloaded\b ✎The time required to download the so\ftware is determined by the signal status\b ■ Stan\fby Mo\fe Upgra\fe: A manual upgrade \ywill be automatically per\fo\yrmed at selected ti\yme\b Since the power o\f the unit i\ys turned on internally, the screen may be turned on slightly \for \ythe LED product\b This phenomenon may cont\yinue \for more than 1 hour unti\yl the so\ftware upgrade is comple\yte\b ■ Alternative Software (backup): Displays\y the so\ftware version downloaded t\yhrough By Online\b During the so\ftware upgrading, When t\yhe Upgrade will dis\ycontinue \from last step, this\y \function be activa\yted\b HD \bonnection Gui\fe Re\fer to this in\for\ymation when connec\yting external devices to the TV\b \bontact Samsung View this in\formatio\yn when your TV does\y not work properly or when you want to\y upgrade the so\ftwa\yre\b You can find in\formation regarding our call centr\yes, and how to down\yload products and so\ftware\b Software Upgrade By USB ► By Online By Channel Standby Mode Upgrade : 2 Hours Later Alternative Software 2010/01/15_00000 U Move E Enter R Return Current Version 2010/01/18_000001 USB Drive TV Rear Panel (HDD ) or [N-Euro]BN68-02590E-03L05.indb 282010-05-17 오후 5:43:46Downloaded From TV-Manual.com ManualL
29English 04A\fvance\f Features Ad\fanced Features Connecting to a PC Using an HDMI/DVI \bable / a D-sub \bable AUDIO OUT AUDIO OUTPC OUT DVI OUT Display Mo\fes (D-Sub an\f HDMI/DVI Input) Optimal resolution is 1920 \yX 1080 @ 60 Hz\b Mo\fe ResolutionHorizontal Frequency (KHz) Vertical Frequency (Hz) Pixel \block Frequency (MHz) Sync Polarity (H / V) IBM 640 x 350 720 x 400 31\b469 31\b469 70\b086 70\b087 25\b175 28\b322 +/- -/+ MA\b 640 x 480 832 x 624 1152 x 870 35\b000 49\b726 68\b681 66\b667 74\b551 75\b062 30\b240 57\b284 100\b000 -/- -/- -/- VESA \bVT 720 x 576 1152 x 864 1280 x 720 1280 x 960 35\b910 53\b783 56\b456 75\b231 59\b950 59\b959 74\b777 74\b857 32\b750 81\b750 95\b750 130\b000 -/+ -/+ -/+ -/+ VESA DMT 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 1024 1280 x 1024 1280 x 720 1280 x 800 1280 x 800 1280 x 960 1360 x 768 1440 x 900 1440 x 900 1600 x 1200 1680 x 1050 31\b469 37\b861 37\b500 37\b879 48\b077 46\b875 48\b363 56\b476 60\b023 67\b500 63\b981 79\b976 45\b000 49\b702 62\b795 60\b000 47\b712 55\b935 70\b635 75\b000 65\b290 59\b940 72\b809 75\b000 60\b317 72\b188 75\b000 60\b004 70\b069 75\b029 75\b000 60\b020 75\b025 60\b000 59\b810 74\b934 60\b000 60\b015 59\b887 74\b984 60\b000 59\b95425\b175 31\b500 31\b500 40\b000 50\b000 49\b500 65\b000 75\b000 78\b750 108\b000 108\b000 135\b000 74\b250 83\b500 106\b500 108\b000 85\b500 106\b500 136\b750 162\b000 146\b250 -/- -/- -/- +/+ +/+ +/+ -/- -/- +/+ +/+ +/+ +/+ +/+ -/+ -/+ +/+ +/+ -/+ -/+ +/+ -/+ VESA GTF 1280 x 720 1280 x 1024 52\b500 74\b620 70\b000 70\b00089\b040 128\b943 -/+ -/- VESA DMT / DTV \bEA 1920 x 1080p 67\b500 60\b000148\b500 +/+ ✎NOTE xFor HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack\b xThe interlace mode is not supported\b xThe set might operate abnormally i\f a non-standard video \format is selected\b xSeparate and Composite modes are supported\b SOG(Sync On Green) is not supported\b [N-Euro]BN68-02590E-03L05.indb 292010-05-17 오후 5:43:47Downloaded From TV-Manual.com ManualL
30English Ad\fanced Features Network Connection\h You can set up your \yTV so that it can \yaccess the Internet through your local area network (LAN) u\ysing a wired or wireless connection\b ¦ \bonnecting to a Wire\f Network You can attach your \yTV to your LAN usin\yg cable in three ways: y You can attach your \yTV to your LAN by c\yonnecting the LAN \yport on the back o\y\f your TV to an ext\yernal modem using a C\yat 5 cable\b See the dia\ygram below\b y You can attach your \yTV to your LAN by c\yonnecting the LAN \yport on the back o\y\f your TV to a IP Sh\yarer which is connec\yted to an external modem\b Use Cat \y5 cable \for the con\ynection\b See the dia\ygram below\b y Depending on how yo\yur network is confi\ygured, you may be able \yto attach your TV t\yo your LAN by conne\ycting the LAN port on the back o\y\f your TV directly to a network \ywall outlet using \ya Cat 5 cable\b See \ythe diagram below\b Note that the wal\yl outlet is attached \yto a modem or router elsewhere in your house\b I\f you have a Dynami\yc Network, you shou\yld use an ADSL modem\y or router that support\ys Dynamic Host Confi\yguration Protocol (DHCP)\b Mode\yms and routers that suppor\yt DHCP automatical\yly provide the IP address, subnet mask, \ygateway, and DNS values your \yTV needs to access \ythe Internet so you don’t have to enter th\yem manually\b Most h\yome networks are Dynamic Networks\b Some networks require a Static IP address\b I\f your network\y requires a Static IP address, you must enter\y the IP address, subnet mask, gatew\yay, and DNS values m\yanually on your TV’\ys Cable Setup Screen when you set up\y the network connection\b To get the IP address, subnet mask, \ygateway, and DNS val\yues, contact your I\ynternet Service Provider (ISP)\b I\f you have a Windows computer, you can also get \ythese values through your computer\b ✎You can use ADSL modems that support DHCP i\f your network requires a Static IP address\b ADSL modems that support DHCP also let you use Static IP addresses\b ANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE) ANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE) ANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE) The Modem Port on the Wall TV Rear Panel Modem Cable External Modem (ADSL / VDSL / Cabl\ye TV) LAN Adapter LAN CableANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE) ANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE) ANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE) LAN Adapter The Modem Port on the Wall TV Rear Panel LAN Cable Modem Cable LAN Cable ANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE) ANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE) ANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE)ANT 2 IN(SATELLITE)ANT 2 IN(AIR/CABLE) TV Rear Panel LAN Cable The LAN Port on the Wall External Modem (ADSL / VDSL / Cabl\ye TV) IP Sharer (having DHCP serve\yr) LAN Adapter [N-Euro]BN68-02590E-03L05.indb 302010-05-17 오후 5:43:50Downloaded From TV-Manual.com ManualL