Samsung UE 40C7000 User Manual

							11English
02\bonnections
Changing the \fnput S\hource
Source	List
Use to select TV o\yr other external input 
sources such as DVD / \yBlu-ray players 
/ cable box / STB s\yatellite receiver 
connected to the TV\y\b 
 
■ TV	/	Ext.1	/	Ext.2	/	P\b	/	AV	/	
\bomponent	/	HDMI1/DVI	/	HDMI2	/	
HDMI3	/	HDMI4	/	USB
 
✎In the Source	List , connected 
inputs will be highlighted\b 
 
✎Ext.1,	Ext.2 and P\b always stay activated\b
E\fit	Name
 
■ V\bR	/	DVD	/	\bable	STB	/	Satellite	STB	/	PVR	STB	/	
AV	Receiver	/	Game	/	\bamcor\fer	/	P\b	/	DVI	P\b	/		
DVI	Devices	/	TV	/	IPTV	/	Blu-ray	/	HD	DVD	/	DMA: 
Name the device con\ynected to the input\y jacks to make 
your input source selection easie\yr\b
 
✎When a PC with a resolution o\f 1920 x 1080 @ 
60Hz is connected to the HDMI	IN	1(DVI) port, 
you should set to DVI	P\b mode under E\fit	Name \b
 
✎When connecting an HDMI/DVI cable to the  
HDMI	IN	1(DVI) port, you should set to DVI	P\b or 
DVI	Devices mode under E\fit	Name \b
 
✎I\f an HDMI cable is connected to the 
HDMI	IN	1(DVI) port, the audio may not work\b In 
this case, connect to the P\b/DVI	AUDIO	IN port\b
\bONNE\bTIONS	\bOMMON	INTERFA\bE	Slot
To watch paid channe\yls, the “CI or CI+\y CARD” must be ins\yerted\b  
y I\f you don’t insert the “CI o\yr CI+ CARD,” some \ychannels will 
display the message\y “Scrambled Signal”\b\y
 
y The pairing in\forma\ytion containing a \ytelephone number, the “CI or 
CI+ CARD” ID the H\yost ID and other in\y\formation will be d\yisplayed 
in about 2~3 minut\yes\b I\f an error message is displ\yayed, please 
contact your servic\ye provider\b
 
y When the configurat\yion o\f channel in\fo\yrmation has finishe\yd, the 
message “Updating C\yompleted” is displa\yyed, indicating the \y
channel list is up\ydated\b
 
✎NOTE
 
xYou must obtain a “CI or CI+ CARD” \from a local cable service provider\b 
 
xWhen removing the “CI or CI+ CARD”, care\fully pull it out with your hands since dropping the “CI or CI+ CARD” may 
cause damage to it\b
 
xInsert the “CI or CI+ CARD” in the direction marked on the card\b
 
xThe location o\f the \bOMMON	INTERFA\bE slot may be di\f\ferent depending on the model\b
 
x“CI or CI+ CARD” is not supported in some countries and regions; check with your authorized dealer\b
 
xI\f you have any problems, please contact a service provider\b
 
xInsert the “CI or CI+ CARD” that supports the current antenna settings\b The screen will be distorted or will not be 
seen\b
 
xWhen you are watching the satellite T V, remove the “CI or CI+ CARD” o\f terrestrial and cable\b The screen will be 
distorted or will not be seen\b
SOURCE
[N-Euro]BN68-02590E-03L05.indb   112010-05-17   오후 5:43:36Downloaded From TV-Manual.com ManualL 
						

							12English
Basic Features
How to Navigate Me\hnus
Be\fore using the TV, \follow the steps \ybelow to learn how to 
navigate the menu \yand select and adjus\yt di\f\ferent \functions\b
POWERSOURCEON/OFF
INTERNET@TV
CONTENT
MEDIA.P
P.SI\fEADSUBT.
ABCD
3D
TTX/MIXPRE\bCH
GUIDE
CH LIST
MUTE
TOOLSINFO
RETURNEXIT
MENU
2
1
4
3
1	ENTERE / Direction button: Mov\ye the cursor and 
select an item\b Con\yfirm the setting\b
2	 RETURN button: Returns to the previous menu\b
3	 MENU button: Displays t\yhe main on-screen menu\b
4	 EXIT button: Exits the \yon-screen menu\b
How	to	Operate	the	OSD	(On	Screen	Display)
The access step ma\yy di\f\fer depending on the\y selected menu\b
1MENU mThe main menu opti\yons appear on 
the screen:
Picture,	Soun\f,	\bhannel,	Setup,	
Input,	Application,	Support\b
2▲ / ▼ Select an icon with\y the ▲ or ▼ 
button\b
3ENTER EPress ENTERE to access the 
sub-menu\b
4▲ / ▼ Select the desired submenu with 
the ▲ or ▼ button\b
5◄ / ►Adjust the value o\f\y an item with the \y
◄ or ► button\b The adjust\yment in 
the OSD may di\f\fer depending on 
the selected menu\b
6ENTER EPress ENTERE to complete the 
configuration\b
7EXIT ePress EXIT\b
Using the \fNFO butt\hon (Now & Next gui\h\be)
The display identifie\ys the current channel 
and the status o\f c\yertain audio-video \y
settings\b
The Now & Next gui\yde shows daily TV 
programme in\formation\y \for each channel 
according to the broadcasting time\b
 
y Scroll ◄, ► to view in\formatio\yn \for a 
desired programme while watc\yhing the 
current channel\b 
 
y Scroll  ▲, ▼ to view in\formation \for other channels\b I\f you 
want to move to th\ye currently selected chan\ynel, press 
the ENTER
E button\b
Planning Your Viewing
Gui\fe
The EPG (Electronic Programme Guide) 
in\formation is provided by broadcasters\b 
Using programme schedules p\yrovided 
by broadcasters, you can\y speci\fy 
programmes you want t\yo watch in 
advance so that the\y channel automatic\yally 
changes to the sel\yected programme 
channel at the spe\ycified time\b Programme 
entries may appear \yblank or out o\f dat\ye depending on a 
channel status\b 
Using	\bhannel	View
 
INFO
GUIDE
DTV  Air
15
DEF18:00  ~ 6:00  Life  On Venu\f  AvenueUnc\ba\f\fifie d
No  Detai\bd  Information E 
18:11 Thu 6 Jan
Watch
Information
 DTV Air 800 fiveHome and Awa\f
18:00 - 18:\b0
DramaDani is devastated\w when scott makes c\wlear his views on m\warriage...
 
 
 27
28
800
24
16
6 Discover\f
Discover\fH&
L
five
price-drop.tv
QVC
R4DTTAmerican Choppe rProgrammes resume \wat 06:00
Home and...
No Information
QVC Selection
No Information Tine Team
Fiv...
18:00 - 19:00
19:00 - 20:00)Famil\f Affairs)Dark Angel
800 ve
 View Mode    +24 Hours    Ch. Mode    Information  k Page E Watch
2:10 Tue 1 Jun
Guide
Channel View - TV
123456
       Today
[N-Euro]BN68-02590E-03L05.indb   122010-05-17   오후 5:43:37Downloaded From TV-Manual.com ManualL 
						

							13English
03Basic	FeaturesUsing	Sche\fule\f	View
1	
 Red (View	Mo\fe): View the list o\f programmes that 
are playing now or co\yming up\b
2	
 Yellow (+24	Hours): Viewing the list o\f \yprogrammes to 
be broadcasted a\fter 24 h\yours\b
3	
 Blue (\bh.	Mo\fe): Select the type \yo\f channels you 
want to display on \ythe \bhannel	View window\b 
 
– The \bh.	Mo\fe di\f\fers according to the antenna\y 
source\b 
4	 Information: Displays details \yo\f the selected 
programme\b
5	
k (Page): Move to next or \yprevious page\b
6	 ENTER
E button
 
– When selecting the\y current programme, you can 
watch the selected \yprogramme\b
 
– When selecting the\y \future programme, you can 
reserve to watch th\ye selected programme\b To cancel 
the schedule, press the ENTER
E button again and 
select \bancel	Sche\fules\b
\bhannel	Manager
Delete or set \favou\yrites channels and \yuse the programme 
guide \for digital br\yoadcasts\b Select a c\yhannel in the 
\bhannels,	My	\bhannels,	Satellite	or	Sche\fule\f	screen\b
 
 
■	\bhannels: Shows the channel\y list according to 
channel type\b
 
■
*	My	\bhannels: Shows the group o\f the channel\b\y
 
■
	Satellite: Shows the channel\y list according to 
satellite signal\b
 
■
Sche\fule\f: Shows all the cur\yrently reserved 
programmes\b
 
✎Using the colour buttons with the \bhannel	Manager
 
x Red ( Antenna ): Toggle among Air,	\bable or 
Satellite \b
 
x Green ( Zoom): Enlarges or shrinks a channel 
number\b
 
x Yellow ( Select): Select desired channels and press 
the Yellow button to set all the selected channels at 
the same time\b The 
c mark appears to the le\ft o\f 
the selected channels\b
 
x Blue ( Sort): Change the list ordered by channel 
name or channel number\b
 
xk ( Page ): Move to next or previous page\b
 
xT ( Tools ): Displays the \bhannel	Manager option 
menu\b (The options menus may di\f\fer depending on 
the situation\b)
\bhannel	Status	Display	Icons
Icons Operations
AAn analogue channe\yl\b
cA channel selected\b\y
*A channel set as a\y Favourite\b
( A programme currently being broadcast\b
\A locked channel\b
)A reserved programme\b
Gui\fe	Type	(Samsung	/	Gui\fe	Plus+)
(depending on the c\yountry)
You can select a di\f\y\ferent type o\f Guide\b
 
■ Samsung: Uses the guide pr\yogramme by provided 
samsung\b
 
■ Gui\fe	Plus+: Uses the guide pr\yogramme provided by 
Rovi International Solutions\b\y For more in\formation, re\fer 
to “www\beurope\bguideplus\bcom\b”
c 1   1futech
  2  * 24ore.tv
 15   abc1 
  3   BBC Worl\f
  23   bi\f-u\b.tv
  33   Boonerang
  32   Cartoon Nwk
  5   Class News
  4   Coming Soon
  27   Discover y
Satellite               Antenna   Zoom   Select   Sort   k Page  T Tools
Channels
All
TV
Radio
Data/Other
Free
Scrambled
Searched
 DTV Air 800 fiveFamily Affairs
18\f00 - 18\f30
DramaTanya \bonfesses all \1to a stunned Babs. \1Conrad is anxious to\1 hear...
 
 
 18\f30
19\f15)Family Affairs)Dark Ange l 800
800
five
five
800 ve
 View Mode   Information  E Cancel
2:10 Tue 1 Jun
Guide
Scheduled View
146
Today
Today
[N-Euro]BN68-02590E-03L05.indb   132010-05-17   오후 5:43:39Downloaded From TV-Manual.com ManualL 
						

							14English
Basic Features
	
¦ Using	Favourite	\bhannels
*	My	\bhannels
(in \bhannel	Manager)
Shows all \favourite\y channels\b
 
■ E\fit	My	\bhannels	
t: You can set the sel\yected 
channels to desired my channels group\b 
 
✎The “*” symbol will be displayed and the channel will 
be set as a my channel\b
1.	 Select a channel an\yd press the TOOLS button\b 
2.	 Add or delete a chan\ynel in the my chann\yel groups 
you want among 1, 2\y, 3 and 4\b
 
xOne or more groups can be selected\b
3.	 A\fter you have chan\yged the settings, t\yhe channel list 
\for each group can be viewed i\yn my channels\b
\bhannel	List
You can see all the\y channels searched\b
Channel Menu
	
¦ Returning	\bhannels
Antenna	(Air	/	\bable	/	Satellite	/	\banal	
Digital	Sat)
Be\fore your television c\yan begin memorizin\yg the available 
channels, you must \yspeci\fy the type o\f \ysignal source that is 
connected to the TV\y (i\be\b an Air,	\bable, Satellite or \banal	
Digital	Sat system)\b
\bountry	
The PIN input screen appears\b Enter y\your 4 digit PIN num\yber\b 
 
■ Digital	\bhannel: Change the count\yry \for digital 
channels\b
 
■ Analogue	\bhannel: Change the count\yry \for analogue 
channels\b
Auto	Store	
Scans \for a channel\y automatically and \ystores in the TV\b
 
✎Automatically allocated programme numbers may not 
correspond to actual or desired programme numbers\b I\f 
a channel is locked using the \bhil\f	Lock \function, the 
PIN input window appears\b
 
■ Antenna	Source	(Air	/	\bable	/	Satellite	/	\banal	Digital	
Sat): Select the antenn\ya source to memorise\b
When	Antenna	Source	is	set	to	Air	or	\bable:  
■ \bhannel	Source	(Digital	&	Analogue	/	Digital	/	
Analogue): Select the channe\yl source to memorise\b
When selecting \bable → Digital	&	Analogue or Digital: 
Provide a value to sc\yan \for cable channe\yls\b
Search	Mo\fe	(Full	/	Network	/	Quick): Scans \for all 
channels with acti\yve broadcast stations an\yd stores them 
in the TV\b
 
✎I\f you select Quick , you can set up the Network,	
Network	ID,	Frequency,	Mo\fulation, and 
Symbol	Rate manually by press the button on the 
remote control\b
Network	(Auto	/	Manual): Selects the Network	ID 
setting mode among \yAuto or Manual\b
Network	ID: When Network is Manual, you can set up 
Network	ID using the numeric\y buttons\b
Frequency: Displays the \frequency \for the cha\ynnel\b 
(di\f\fers in each countr\yy)
Mo\fulation: Displays availabl\ye modulation values\y\b
Symbol	Rate: Displays availabl\ye symbol rates\b
 
■ \bable	Mo\fe	(\bable	Network	/	SMATV	Network) 
(Norway only): Selec\yt the Cable mode to memorise\b
 
✎This \function is available when you have multiple 
network\b
CH LIST
c  1   1futech
  2  * 24ore.tv
 15   abc1 
  3   BBC Worl\f
  23   bi\f-u\b.tv
  33   Boonerang
  32   Cartoon Nwk
  5   Class News
  4   Coming Soon
  27   Discover y
Satellite               Antenna   Zoom   Select   Sort   k Page  T Tools
Channels
All
TV
Radio
Data/Other
Free
Scrambled
Searched
Edit My Channels
Lock
Timer Viewing
Timer Recording
Edit Channel Number
Delete 
d
[N-Euro]BN68-02590E-03L05.indb   142010-05-17   오후 5:43:39Downloaded From TV-Manual.com ManualL 
						

							15English
03Basic	FeaturesWhen	Antenna	Source	is	set	to	Satellite:
 
■ \bhannel	Type	(All	/	TV	/	Ra\fio): Select the Channe\yl 
type to memorise\b
 
■ Satellite: Selects the satel\ylite to scan\b
 
■ Scan	Mo\fe	(All	\bhannels	/	Free	\bhannels	Only): 
Selects the scannin\yg mode o\f the selec\yted satellite\b 
Manual	Store	
(Not available whe\yn Antenna Source is set to \banal	Digital	
Sat)
Scans \for a channel\y manually and stores in the TV\b
 
✎I\f a channel is locked using the \bhil\f	Lock \function, 
the PIN input window appears\b
When	Antenna	Source	is	set	to	Air	or	\bable:  
■ Digital	\bhannel: When scanning ha\ys finished, channels\y 
are updated in the ch\yannel list\b
 
✎When selecting Antenna → Air:	\bhannel,	
Frequency,	Ban\fwi\fth
 
✎When selecting Antenna → \bable:	Frequency,	
Mo\fulation,	Symbol	Rate
 
■ Analogue	\bhannel	(Programme,	\bolour	System,	
Soun\f	System,	\bhannel,	Search): I\f there is abnormal 
sound or no sound, \yreselect the sound s\ytandard 
required\b
 
✎Channel mode
 
xP (programme mode): When tuning is complete, 
the broadcasting stations in your area have been 
assigned to position numbers \from P0 to P99\b You 
can select a channel by entering the position number 
in this mode\b
 
x\b (aerial channel mode) / S (cable channel mode): 
These two modes allow you to select a channel 
by entering the assigned number \for each aerial 
broadcasting station or cable channel\b
When	Antenna	Source	is	set	to	Satellite:  
■ Satellite: Selects the satel\ylite using the up/\ydown 
buttons\b
 
■ Transpon\fer: Selects the trans\yponder using the up\y/
down buttons\b
 
■ Scan	Mo\fe	(All	\bhannels	/	Free	\bhannels	Only): 
Selects either \free or all channels\y to store\b
 
■ Network	Search	(Disable	/	Enable): Enable / Disable \y
network search using the up/dow\yn buttons\b
 
■ Signal	Quality: Display the current status o\f 
broadcasting signal\b
 
✎In\formation on a satellite and its transponder is subject 
to change depending on the broadcasting conditions\b
 
✎When setting is completed, move to Search and press 
the ENTERE button\b Channel scan is started\b
Satellite	System	Setup
The PIN input screen appears\b Enter y\your 4 digit PIN num\yber\b 
Satellite	System	Setup is available when\y Antenna is set to 
Satellite or \banal	Digital	Sat\b Be\fore running Auto	Store,	
Set Satellite	System	Setup\b Then channel scan\y is run 
normally\b
 
■ Satellite	Selection: You can choose the \ysatellites \for 
this TV\b
 
✎This \function is available when Antenna is set to 
Satellite \b
 
■ LNB	Power	(Off	/	On): Enables or disable\ys the power 
supply \for the LNB\b
 
■ LNB	Settings: Configures the outdoor equi\ypment\b
 
– Satellite: Selects the satel\ylite \for receiving digital 
broadcasts\b
 
– Transpon\fer: Selects a transpo\ynder \from the list or 
adds a new transpon\yder\b
 
– DiSEq\b	Mo\fe: Selects DiSEqC mode\y \for the 
selected LNB\b
 
– Lower	LNB	Oscillators: Sets the LNB osci\yllators to a 
lower \frequency\b
 
– Upper	LNB	Oscillators: Sets the LNB osci\yllators to a 
higher \frequency\b
 
– Tone	22	kHz	(Off	/	On	/	Auto): Selects the Tone 22 
kHz depending on th\ye LNB type\b For a u\yniversal LNB 
it should be Auto\b
 
– Signal	Quality: Display the current status o\f 
broadcasting signal\b
 
■ Positioner	Settings: Configures the antenna pos\yitioner\b
Positioner	(On	/	Off): Enables or disable\ys the positioned 
control\b
Positioner	Type	(USALS	/	DiSEq\b	1.2): Sets 
the positioned type\y between DiSEqC 1\b2 \yand 
USALS(Universal Sate\yllite Automatic Lo\ycation System)\b
 
– My	Longitu\fe: Sets the longitud\ye \for my location\b
 
– My	Latitu\fe: Sets the latitude\y \for my location\b
 
– Satellite	Longitu\fe	Settings: Sets the longitud\ye o\f 
user defined satelli\ytes\b
User	Mo\fe: Sets the position\y o\f satellite anten\yna 
according to each satell\yite\b I\f you store the current 
position o\f satelli\yte antenna according to a certain 
satellite, when th\ye signal o\f that sa\ytellite is needed, \y
the satellite ante\ynna can be moved to\y pre-populated 
position\b  
– Satellite: Selects the satel\ylite to set the po\ysition \for\b 
 
– Transpon\fer: Selects a transpo\ynder \from the list \for 
signal reception\b 
 
– Moving	Mo\fe: Selects the movem\yent mode between 
discrete and continuous \ymovement\b 
 
– Step	Size: Adjusts the step \ysize degrees \for the 
antenna rotation\b Step Size i\ys available when M\yoving 
Mode is set to Step\y\b 
[N-Euro]BN68-02590E-03L05.indb   152010-05-17   오후 5:43:40Downloaded From TV-Manual.com ManualL 
						

							16English
Basic Features
––Go to Stored Position: – Rotates – the – antenna – to – the –stor
ed – satellite – position. –
––Antenna Position

: – \fdjusts – and – stores – the – antenna –
position

– for – the – sele\bted – satellite. –
––Stor

e Current Position: – Stores – \burrent – position – as –
the

– sele\bted – positioner – limit. –
––Signal Qualit\f

: – Display – the – \burrent – status – of –
br

oad\basting – signal.
Installer Mode:
– Sets – limits – to – the – s\bope – of – movement –
of

– satellite – antenna – or – reset – the – position. – Generally, –
installation

– guide – uses – this – fun\btion.
–– Li\bit Position (Eas\Qt / West):
– Sele\bts – the – dire\btion – of –
the

– positioner – Limit. –
––Antenna Position

: – \fdjusts – and – stores – the – antenna –
position

– for – the – sele\bted – satellite. –
––Stor

e Current Position: – Stores – the – \burrent – position –
as

– the – sele\bted – positioner – Limit. –
––Go to Zer

o: – Moves – the – antenna – to – the – referen\be –
position.

–
––Reset Positioner Li\Q\bit

: – \fllows – the – antenna – to – rotate –
over

– the – full – ar\b.
–■Reset All Setting \Q(OK / Cancel)

: – \fll – satellite – settings – will –
be

– reset – to – the – initial – values.
 ¦Editing Channels
Channel Manager Opti\Qon Menu 
(in
– Channel Manager)
1.
 
Sele\bt
 – a – \bhannel – and – press – the – TOOLS – button. –
2.

 
Edit
 – the – \bhannel – name – or – number – using – the –
Edit Channel Na\be

– or – Edit Channel Nu\bber\Q – menu.
–■Edit Channel Na\be

– (analogue – \bhannels – only): – \fssign –
your

– own – \bhannel – name. –
–
■ Edit Channel Nu\bber\Q

– (digital – \bhannels – only): – Edit – the –
number

– by – pressing – the – number – buttons – desired.
 ¦Other Featur es
Channel Manager
Channel Manager Opti\Qon Menu 
Set
– ea\bh – \bhannel – using – the – Channel Manager – menu – options –
(

Lock / Unlock, Ti\be\Qr Viewing, Ti\ber Recor\Qding, Sort, 
Reorder, Delete, Select A\Qll / Deselect All).
– Option – menu –
items

– may – differ – depending – on – the – \bhannel – status.
1.
 
Sele\bt
 – a – \bhannel – and – press – the – TOOLS – button. –
2.

 
Sele\bt
 – a – fun\btion – and – \bhange – its – settings.
–■Lock / Unlock : – Lo\bk – a – \bhannel – so – that – the – \bhannel –\bannot
– be – sele\bted – and – viewed.
–✎NOTE
–xThis–fun\btion–is–available–only–when–the––
C hild Lock – is – set – to – On.
–xThe–PIN–input–s\breen–appears.–Enter–your–4
-digit – PIN, – the – default – of – whi\bh – is – “0-0-0-0”. –
C

hange – the – PIN – using – the – Change PIN – option.
–■Ti\ber V

iewing: – You – \ban – set – a – desired – \bhannel – to – be –
displayed

– automati\bally – at – the – reserved – time. – Set – the –
\burr

ent
–
time – first – to – use – this – fun\btion. –
–✎When–a–digital–\bhannel–is–sele\bted–in––
C hannel Manager ,
– press – the – ► – button – to – view –
t

he – digital – Programme.
–■Ti\ber Recor

ding – (digital – \bhannels – only): – \fllows – you – to –
r

e\bord – a – programme – \burrently – being – broad\basted – or –
make

– a – reservation – to – re\bord – a – programme – s\bheduled –
for

–
broad\bast.
–✎\f–USB–devi\be–with–4GB–of–memory–or–greater–m ust – be – \bonne\bted – to – the – T V.
–✎\f–USB–storage–devi\be–\bannot–re\bord–until–it–\bompletes – the – Devi\be – Performan\be – Test.
–✎In–\base–of–USB-HDD,–over–5400rpm
–✎In–\base–of–USB–Sti\bk,–USB–2.0–and–SLC–Type.–(Minimum – size – of – USB – Sti\bk – is – 2GB.)
–✎To–re\bord,–press–the––�–(REC)–button–on–the–remote. – Press – � – (REC) – twi\be – to – set – the – re\bording –
duration.
–■Sort

–
(analogue – \bhannels – only): – This – operation – allows –
you

–
to – \bhange – the – programme – numbers – of – the – stored –
\bhannels.

– This – operation – may – be – ne\bessary – after – using –
the

–
auto – store. –
–
■ Reor

der – (when – the – \fntenna – was – set – to – Satellite): –
Rearrange

– the – \bhannel – manager – in – numeri\bal – order. –
–
■ Delete

: – You – \ban – delete – a – \bhannel – to – display – the – \bhannels –
you

–
want.
–■ Select All / Desel\Qect All

: – Sele\bt – all – the – \bhannels –
or

–
desele\bt – all – the – sele\bted – \bhannels – in – the – \bhannel –
manager

.
Scheduled 
(in–Channel Manager)
Y ou – \ban – view, – modify – or – delete – a – show – you – have – reserved – to –
wat\bh.
–■Change Info

: – Change – a – show – you – have – reserved – to –
wat\bh.
–■Cancel Schedules

: – Can\bel – a – show – you – have – reserved –
to

– wat\bh.
–■Infor\bation

: – Display – a – show – you – have – reserved –
to

– wat\bh. – (You – \ban – also – \bhange – the – reservation –
information.)
–■Select All / Desel\Qect All

: – Sele\bt – or – desele\bt – all – reserved –
pr

ogrammes.
1_BN68-02590E-03Eng.indd   162010-05-17   오후 8:02:03 
						

							17English
03Basic	Features\bhannel	List	Transfer
The PIN input screen appears\b Enter y\your 4 digit PIN num\yber\b 
Imports or exports\y the channel map\b Y\you should connect a\y 
USB storage to use \ythis \function\b
 
■ Import	from	USB: Import channel l\yist \from USB\b
 
■ Export	to	USB: Export channel li\yst to USB\b this \func\ytion 
is available when \yUSB is connected\b
E\fit	\bhannel	Number	(Disable	/	Enable)
(digital channels o\ynly)
When this \function \yis enable, you can \yedit channel number\y 
(p\b 16)\b But you can\ynot update channel \yin\formation 
automatically\b
Fine	Tune	
(analogue channels\y only)
I\f the signal is we\yak or distorted, fin\ye tune the channel\y 
manually\b 
 
✎Fine tuned channels are marked with an asterisk “*”\b 
 
✎To reset the \fine-tuning, select Reset \b
Picture Menu
	
¦ \bhanging	the	Preset	Picture	Mo\fe
Mo\fe	
Select your pre\ferred picture type\b 
 
■ Dynamic: Suitable \for a br\yight room\b 
 
■ Stan\far\f: Suitable \for a no\yrmal environment\b 
 
■ Natural: Suitable \for reducing eye strain\b \y
 
✎Natural is not available in PC mode\b 
 
■ Movie: Suitable \for watc\yhing movies in a da\yrk room\b 
	
¦ A\fjusting	Picture	Settings
Backlight	/	\bontrast	/	Brightness	/	
Sharpness	/	\bolour	/	Tint	(G/R)	
Your television has\y several setting o\yptions \for picture quality 
control\b
 
✎NOTE
 
xIn analogue T V,	Ext.,	AV modes o\f the PAL system, 
the Tint	(G/R) \function is not available\b
 
xIn PC mode, you can only make changes to 
Backlight,	\bontrast and Brightness \b
 
xSettings can be adjusted and stored \for each 
external device connected to the T V\b
	
¦ Economical	Solutions
Eco	Solution
 
■ Energy	Saving	(Off	/	Low	/	Me\fium	/	High	/		
Picture	Off)	t: Adjust the bright\yness o\f the 
TV in order to reduce power consump\ytion\b I\f you select \y
Picture	Off, the screen is turned o\f\f, but the sound 
remains on\b Press any button exce\ypt volume button t\yo 
turn on the screen\b 
 
■ Eco	Sensor	(Off	/	On): To enhance your powe\yr savings; 
the picture settings will au\ytomatically adapt t\yo the light 
in the room\b
 
✎I\f you adjust the Backlight , the Eco	Sensor will 
be set to Off \b
Min	Backlight: When Eco	sensor is On, the minimum 
screen brightness can\y be adjusted manual\yly\b
 
✎I\f Eco	Sensor is On , the display brightness 
may change (become slightly darker or brighter) 
depending on the surrounding light intensity\b
 
■ No-Signal	Power	Off	(Off	/	15	min	/	30	min	/	60	min): 
To avoid unnecessary\y energy consumption\y, set how long 
you want the TV to \yremain on i\f it’s not receiving a signal\b
 
✎Disabled when the PC is in power saving mode\b
[N-Euro]BN68-02590E-03L05.indb   172010-05-17   오후 5:43:40Downloaded From TV-Manual.com ManualL 
						

							18English
Basic Features
	
¦ \bhanging	the	Picture	Options
A\fvance\f	Settings
(available in Stan\far\f	/	Movie mode)
You can adjust the d\yetailed setting \for\y the screen including 
colour and contrast\y\b
 
✎In PC mode, you can only make changes to 
Dynamic	\bontrast,	Gamma,	White	Balance and 
LED	Motion	Plus \b
 
■ Black	Tone	(Off	/	Dark	/	Darker	/	Darkest): Select the 
black level to adju\yst the screen depth\b 
 
■ Dynamic	\bontrast	(Off	/	Low	/	Me\fium	/	High): Adjust 
the screen contrast\b 
 
■ Sha\fow	Detail	(-2~+2): Increase the brightnes\ys o\f dark 
images\b 
 
■ Gamma: Adjust the primar\yy colour intensity\b
 
■ Expert	Pattern	(Off	/	Pattern1	/	Pattern2): By running 
the Expert	Pattern \function, the pict\yure can be 
calibrated without \ya generator or filt\yer\b I\f the OSD menu 
disappears or a men\yu other than the P\yicture menu is 
opened, the calibra\ytion is saved and t\yhe Expert	Pattern 
window disappears\b
 
✎While the Expert	Pattern is running, sound is not 
outputted\b
 
✎Only enabled in DT V, Component and HDMI 
modes\b
 
■ RGB	Only	Mo\fe	(Off	/	Re\f	/	Green	/	Blue): You can 
adjust \bolour or Tint	(G/R) o\f Re\f,	Green or Blue \for 
the picture \from an external device (DVD pla\yyer, home 
theatre, etc\b)\b   
■ \bolour	Space	(Auto	/	Native	/	\bustom): Adjust the 
range o\f colours av\yailable to create the image\b To adjust 
\bolour,	Re\f,	Green,	Blue and Reset, set 
\bolour	Space to \bustom\b 
 
■ White	Balance: Adjust the colour\y temperature \for a 
more natural picture\b 
R-Offset	/	G-Offset	/	B-Offset: Adjust each colou\yr’s 
(red, green, blue) darkness\y\b 
R-Gain	/	G-Gain	/	B-Gain	: Adjust each colou\yr’s (red, 
green, blue) brightn\yess\b 
Reset: Resets the White	Balance to it’s de\fault settings\b \y
 
■ 10p	White	Balance	(Off	/	On): Controls the white 
balance in 10 poin\yt interval by adjus\yting the red, green, 
and blue brightness\y\b
 
✎Available when the picture mode is set to Movie 
and when the external input is set to HDMI or 
Component\b 
 
✎Some external devices may not support this 
\function\b
Interval: Select interval t\yo adjust\b 
Re\f: Adjust the red level\b 
Green: Adjust the green level\b 
Blue: Adjust the blue l\yevel\b 
Reset: Resets the 10p	White	Balance to its de\fault 
settings\b 
 
■ Flesh	Tone: Emphasize pink “F\ylesh Tone\b” 
 
■ E\fge	Enhancement	(Off	/	On): Emphasize object \y
boundaries\b 
 
■ xvY\b\b	(Off	/	On): Setting the xvY\b\b mode on 
increases detail and colour space when watching movies 
\from an external device (e\bg\b DVD\y player) connected \yto 
the HDMI or Compon\yent IN jacks\b 
 
✎Available when the picture mode is set to Movie 
and when the external input is set to HDMI or 
Component\b
 
✎Some external devices may not support this 
\function\b
 
■ LED	Motion	Plus	(Off	/	Normal	/	\binema	/	Ticker): 
Removes drag \from \fast scenes with\y a lot o\f movement \y
to provide a clear pictu\yre\b
Advanced Settings
Black Tone   : Off  ►
Dynamic Contrast  : Medium
Shadow Detail  : -2
Gamma  : 0
Expert Pattern   : Off
RGB Only Mode  : Off
Colour Space  : Native
                                            ▼
U Move  E Enter  R Return
[N-Euro]BN68-02590E-03L05.indb   182010-05-17   오후 5:43:41Downloaded From TV-Manual.com ManualL 
						

							19English
03Basic	Features
Picture Options
Colour Tone  : Normal   ►
Size  : Auto Wide
Screen Mode  : 16:9
Digital Noise Filter  : Auto
MPEG Noise Filter   : Auto
HDMI Black Level  : Normal
Film Mode  : Off
                                            ▼
U Move  E Enter  R Return
Picture	Options
 
✎In PC mode, you can only make changes to the  
\bolour	Tone,	Size,	and Auto	Protection	Time \b
 
■ \bolour	Tone	(\bool	/	Normal	/	Warm1	/	Warm2)
 
✎Warm1 or Warm2 will be deactivated when the 
picture mode is Dynamic \b
 
✎Settings can be adjusted and stored \for each 
external device connected to an input on the T V\b
 
■ Size	: Your cable box/sate\yllite receiver may have it\ys own 
set o\f screen sizes as well\b \yHowever, we 
highly recommend you use 16\y:9 mode 
most o\f the time\b
Auto	Wi\fe: Automatically adj\yusts the 
picture size to the 16:9\y aspect ratio\b 
16:9 : Adjusts the pict\yure size to 16:9 \for \y
DVDs or wide broadcasting\b 
Wi\fe	Zoom: Magnifies the pic\yture size 
more than 4:3\b 
 
✎Adjusts the Position by using ▲ , ▼ buttons\b 
Zoom: Magnifies the 16:\y9 wide pictures vertically to fit\y 
the screen size\b 
 
✎Adjusts the Position or Size by using ▲ , ▼ 
button\b 
4:3 : The de\fault sett\ying \for a movie or \ynormal 
broadcasting\b
 
✎Do not watch in 4:3 \format \for a long time\b Traces 
o\f borders displayed on the le\ft, right and centre 
o\f the screen may cause image retention(screen 
burn) which are not covered by the warranty\b Screen	Fit: Displays the \full\y image without any \ycut-o\f\f 
when HDMI (720p / \y1080i / 1080p) or \yComponent 
(1080i / 1080p) si\ygnals are inputted\b
 
✎NOTE
 
xWhen Double (À, Œ) mode has been set in PIP, 
the Picture Size cannot be set\b 
 
xDepending on the input source, the picture size 
options may vary\b 
 
xThe available items may di\f\fer depending on the 
selected mode\b 
 
xIn PC mode, only 16:9 and 4:3 modes can be 
adjusted\b 
 
xSettings can be adjusted and stored \for each 
external device connected to an input o\f the T V\b 
 
xA\fter selecting Screen	Fit in HDMI (1080i / 1080p) 
or \bomponent (1080i / 1080p) mode: Adjusts the 
Position or Size by using ▲ , ▼, ◄ , ► button\b 
 
xI\f you use the Screen	Fit \function with HDMI 720p 
input, 1 line will be cut at the top, bottom, le\ft and 
right as in the overscan \function\b
 
■ Screen	Mo\fe	(16:9	/	Wi\fe	Zoom	/	Zoom	/	4:3): 
Available only when \ypicture size is set to Auto	Wi\fe\b You 
can determine the d\yesired picture size at the 4:3 \yWSS 
(Wide Screen Service) size o\yr the original siz\ye\b Each 
European country requires di\f\ferent picture size\b
 
✎Not available in PC, Component or HDMI mode\b
 
■ Digital	Noise	Filter	(Off	/	Low	/	Me\fium	/	High	/	Auto	
/	Auto	Visualisation): When the broadcast signal is 
weak, some static \yand ghosting may ap\ypear\b Select one 
o\f the options unti\yl the best picture is displayed\b 
Auto	Visualisation: When changing an\yalogue channels, 
displays the intens\yity o\f the current signal and defin\yes 
the screen noise filter\b
 
✎Only available \for analogue channels\b
 
■ MPEG	Noise	Filter	(Off	/	Low	/	Me\fium	/	High	/	
Auto): Reduces MPEG noise\y to provide improved 
picture quality\b 
 
■ HDMI	Black	Level	(Normal	/	Low): Selects the black\y 
level on the screen to adjust the s\ycreen depth\b
 
✎Available only in HDMI mode (RGB signals)\b
 
■ Film	Mo\fe	(Off	/	Auto1	/	Auto2	/	\binema	Smooth): 
Sets the TV to auto\ymatically sense and\y process film 
signals \from all sources and adjust the \ypicture \for 
optimum quality\b
 
✎Available in T V, AV, COMPONENT (480i / 1080i) 
and HDMI (480i / 1080i)\b
P.SIZE
[N-Euro]BN68-02590E-03L05.indb   192010-05-17   오후 5:43:41Downloaded From TV-Manual.com ManualL 
						

							20English
Basic Features
 
■ Motion	Plus	(Off	/	\blear	/	Stan\far\f	/	Smooth	/	
\bustom	/	Demo): Removes drag \from \fast scenes with\y 
a lot o\f movement t\yo provide a clearer picture\b
 
✎I\f noise occurs on the screen, please set up the 
Motion	Plus to Off \b I\f Motion	Plus is \bustom , 
you can set up the Blur	Re\fuction,	Ju\f\fer	
Re\fuction or Reset manually\b 
 
✎I\f Motion	Plus is Demo , you can compare the 
di\f\ference o\f on and o\f\f modes\b
Blur	Re\fuction: Adjusts the blur \yreduction level \from 
video sources\b 
Ju\f\fer	Re\fuction: Adjusts the judder\y reduction level 
\from video sources when playing fil\yms\b 
Reset: Reset the custom\y settings\b
 
■ Auto	Protection	Time	(2	hours	/	4	hours	/	8	hours	
/	10	hours	/	Off): I\f the screen remains idle with a \ystill 
image \for a certain\y period o\f time defin\yed by the user, 
the screen saver is activ\yated to prevent the \formation\y o\f 
ghost images on th\ye screen\b
	
¦ Viewing	TV	using	the	3D	function
IMPORTANT	SAFETY	INFORMATION.	READ	THE	
FOLLOWING	WARNINGS	BEFORE	YOU	OR	YOUR	
\bHILD	USE	THE	3D	FUN\bTION
	
[WARNING
 
xSome viewers may experience discom\fort while 
viewing 3D T V such as dizziness, nausea and 
headaches\b I\f you experience any such symptom, 
stop viewing 3D T V, remove 3D Active Glasses and 
rest\b
 
xWatching 3D images \for an extended period o\f time 
may cause eye strain\b I\f you \feel eye strain, stop 
viewing 3D T V, remove your 3D Active Glasses and 
rest\b
 
xA responsible adult should \frequently check on 
children who are using the 3D \function\b I\f there are 
any reports o\f tired eyes, headaches, dizziness, or 
nausea, have the child stop viewing 3D T V and rest\b
 
xDo not use the 3D Active Glasses \for other purposes 
(such as general eyeglasses, sunglasses, protective 
goggles, etc\b)
 
xDo not use the 3D \function or 3D Active Glasses 
while walking or moving around\b Using the 3D 
\function or 3D Active Glasses while moving around 
may result in injuries due to running into objects, 
tripping, and/or \falling\b
[N-Euro]BN68-02590E-03L05.indb   202010-05-17   오후 5:43:41Downloaded From TV-Manual.com ManualL