Ricoh Aficio MP2500LN User Manual
Have a look at the manual Ricoh Aficio MP2500LN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 36
Connecting the Machine
28
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for delivering data to network with IEEE
1394 interface cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒If [Delivery Option] is set to [On], check that IPv4 Address is set.
Reference
p.58...](http://img.usermanuals.tech/thumb/64/37675/w64_Ricoh_Aficio_MP2500LN-35.png "Page 36
Connecting the Machine
28
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for delivering data to network with IEEE
1394 interface cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒If [Delivery Option] is set to [On], check that IPv4 Address is set.
Reference
p.58...")
![Page 37
Network Settings
29
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for delivering data to network with IEEE
802.11b (wireless LAN).
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the...](http://img.usermanuals.tech/thumb/64/37675/w64_Ricoh_Aficio_MP2500LN-36.png "Page 37
Network Settings
29
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for delivering data to network with IEEE
802.11b (wireless LAN).
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the...")
![Page 38
Connecting the Machine
30
1
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
Ethernet cable.
For details about how to specify the settings, see “Interface Settings”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is...](http://img.usermanuals.tech/thumb/64/37675/w64_Ricoh_Aficio_MP2500LN-37.png "Page 38
Connecting the Machine
30
1
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
Ethernet cable.
For details about how to specify the settings, see “Interface Settings”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is...")
![Page 39
Network Settings
31
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using network TWAIN Scanner with
IEEE 1394 interface cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
Reference
p.58 “Interface Settings”
IEEE 802.11b (wireless LAN)
This section lists the settings...](http://img.usermanuals.tech/thumb/64/37675/w64_Ricoh_Aficio_MP2500LN-38.png "Page 39
Network Settings
31
1
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using network TWAIN Scanner with
IEEE 1394 interface cable.
For details about how to specify the settings, see “Interface Settings” and “File
Transfer”.
Note
❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
Reference
p.58 “Interface Settings”
IEEE 802.11b (wireless LAN)
This section lists the settings...")
![Page 40
Connecting the Machine
32
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface takes precedence.
Reference
p.58 “Interface Settings”
Settings Required to Use Document Server
This section lists the settings required for using Document Server function under
the network environment....](http://img.usermanuals.tech/thumb/64/37675/w64_Ricoh_Aficio_MP2500LN-39.png "Page 40
Connecting the Machine
32
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected interface takes precedence.
Reference
p.58 “Interface Settings”
Settings Required to Use Document Server
This section lists the settings required for using Document Server function under
the network environment....")
![Page 41
Network Settings
33
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed.
When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
lected interface takes precedence.
Reference
p.58 “Interface Settings”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using Document Server function with
IEEE 1394 interface cable.
For details about how to specify the...](http://img.usermanuals.tech/thumb/64/37675/w64_Ricoh_Aficio_MP2500LN-40.png "Page 41
Network Settings
33
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed.
When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
lected interface takes precedence.
Reference
p.58 “Interface Settings”
IEEE 1394 (IPv4 over 1394)
This section lists the settings required for using Document Server function with
IEEE 1394 interface cable.
For details about how to specify the...")
![Page 42
Connecting the Machine
34
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using Document Server function with
IEEE 802.11b (wireless LAN).
For details about how to specify the settings, see “Interface Settings”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected...](http://img.usermanuals.tech/thumb/64/37675/w64_Ricoh_Aficio_MP2500LN-41.png "Page 42
Connecting the Machine
34
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using Document Server function with
IEEE 802.11b (wireless LAN).
For details about how to specify the settings, see “Interface Settings”.
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are
connected, the selected...")
![Page 44
Connecting the Machine
36
1
❖[Network] → [Machine IPv6 Address] → [Manual Configuration Address]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [IPv6 Stateless Address Autoconfiguration]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the...](http://img.usermanuals.tech/thumb/64/37675/w64_Ricoh_Aficio_MP2500LN-43.png "Page 44
Connecting the Machine
36
1
❖[Network] → [Machine IPv6 Address] → [Manual Configuration Address]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [IPv6 Stateless Address Autoconfiguration]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the...")
![Page 45
Network Settings
37
1
❖[Network] → [WINS Configuration] → [On] → [Secondary WINS Server]
Web Image Monirot:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [WINS Configuration] → [On] → [Scope ID]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting....](http://img.usermanuals.tech/thumb/64/37675/w64_Ricoh_Aficio_MP2500LN-44.png "Page 45
Network Settings
37
1
❖[Network] → [WINS Configuration] → [On] → [Secondary WINS Server]
Web Image Monirot:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [WINS Configuration] → [On] → [Scope ID]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting....")
![Page 46
Connecting the Machine
38
1
❖[Network] → [NW Frame Type] → [Auto Select]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [NW Frame Type] → [Ethernet II]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [NW Frame...](http://img.usermanuals.tech/thumb/64/37675/w64_Ricoh_Aficio_MP2500LN-45.png "Page 46
Connecting the Machine
38
1
❖[Network] → [NW Frame Type] → [Auto Select]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [NW Frame Type] → [Ethernet II]
Web Image Monitor:Can be used for specifying the setting.
SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
telnet:Can be used for specifying the setting.
❖[Network] → [NW Frame...")
Network Settings 33 1 Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se- lected interface takes precedence. Reference p.58 “Interface Settings” IEEE 1394 (IPv4 over 1394) This section lists the settings required for using Document Server function with IEEE 1394 interface cable. For details about how to specify the settings, see “Interface Settings”. Note ❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed. ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. Reference p.58 “Interface Settings” Menu User Tool Setting Requirements Interface Settings/IEEE 1394IPv4 Address Neccessary Interface Settings/IEEE 1394DDNS Configuration As required Interface Settings/IEEE 1394Host Name As required Interface Settings/IEEE 1394Domain Name As required Interface Settings/IEEE 1394WINS Configuration As required Interface Settings/IEEE 1394IPv4 over 1394 Neccessary Interface Settings/NetworkIPv4 Gateway Address As required Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkEffective Protocol Neccessary Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 34 1 IEEE 802.11b (wireless LAN) This section lists the settings required for using Document Server function with IEEE 802.11b (wireless LAN). For details about how to specify the settings, see “Interface Settings”. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.58 “Interface Settings” Menu User Tool Setting Requirements Interface Settings/NetworkMachine IPv4 Address Neccessary Interface Settings/NetworkIPv4 Gateway Address As required Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required Interface Settings/NetworkDomain Name As required Interface Settings/NetworkWINS Configuration As required Interface Settings/NetworkEffective Protocol Neccessary Interface Settings/NetworkLAN Type As required/Neccessary Interface Settings/NetworkPermit SNMPv3 Communication As required Interface Settings/NetworkPermit SSL/TLS Communication As required Interface Settings/NetworkHost Name As required Interface Settings/IEEE 802.11bCommunication Mode Neccessary Interface Settings/IEEE 802.11bSSID Setting As required Interface Settings/IEEE 802.11bChannel As required Interface Settings/IEEE 802.11bSecurity Method As required Interface Settings/IEEE 802.11bTransmission Speed As required Downloaded From ManualsPrinter.com Manuals
Network Settings 35 1 Using Utilities to Make Network Settings You can also specify network settings using utilities such as Web Image Monitor, SmartDeviceMonitor for Admin, and telnet. Note ❒For details about using Web Image Monitor, see “Using Web Image Moni- tor”, Network Guide. ❒For details about using SmartDeviceMonitor for Admin, see “Using SmartDe- viceMonitor for Admin”, Network Guide. ❒For Details about using telnet, see “Remote Maintenance”, Network Guide. Reference “Using Web Image Monitor”, Network Guide “Using SmartDeviceMonitor for Admin”, Network Guide “Remote Maintenance by telnet”, Network Guide Interface Settings Change settings by using Web Image Monitor, SmartDeviceMonitor for Admin, and telnet. ❖[Network] → [Machine IPv4 Address] → [Auto-Obtain (DHCP)] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [Machine IPv4 Address] → [Specify] → [IPv4 Address] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [Machine IPv4 Address] → [Specify] → [Sub-net Mask] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [IPv4 Gateway Address] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 36 1 ❖[Network] → [Machine IPv6 Address] → [Manual Configuration Address] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [IPv6 Stateless Address Autoconfiguration] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [DNS Configuration] → [Auto-Obtain (DHCP)] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [DNS Configuration] → [Specify] → [DNS Server1-3] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [DDNS Configuration] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [Domain Name] → [Auto-Obtain (DHCP)] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [Domain Name] → [Specify] → [Domain Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [WINS Configuration] → [On] → [Primary WINS Server] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Network Settings 37 1 ❖[Network] → [WINS Configuration] → [On] → [Secondary WINS Server] Web Image Monirot:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [WINS Configuration] → [On] → [Scope ID] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [Effective Protocol] → [IPv4] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:You can make the TCP/IP settings if SmartDeviceMonitor for Admin is communicating with the machine using IPX/SPX. telnet:Can be used for specifying the setting. ❖[Network] → [Effective Protocol] → [IPv6] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [Effective Protocol] → [NetWare] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:You can make the IPX/SPX settings if SmartDeviceMonitor for Admin is communicating with the machine using TCP/IP. telnet:Can be used for specifying the setting. ❖[Network] → [Effective Protocol] → [SMB] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [Effective Protocol] → [AppleTalk] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [NCP Delivery Protocol] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Cannot be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 38 1 ❖[Network] → [NW Frame Type] → [Auto Select] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [NW Frame Type] → [Ethernet II] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [NW Frame Type] → [Ethernet 802.2] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [NW Frame Type] → [Ethernet 802.3] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [NW Frame Type] → [Ethernet SNAP] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [SMB Computer Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [SMB Work Group] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [Ethernet Speed] Web Image Monitor:Cannot be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Network Settings 39 1 ❖[Network] → [LAN Type] → [Ethernet] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [LAN Type] → [IEEE 802.11b] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [Host Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [Machine Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394] → [IPv4 Address] → [Auto-Obtain (DHCP)] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394] → [IPv4 Address] → [Specify] → [Machine IPv4 Address] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394] → [IPv4 Address] → [Specify] → [Sub-net Mask] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394] → [DDNS Configuration] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 40 1 ❖[IEEE 1394] → [IPv4 over 1394] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394] → [WINS Configuration] → [On] → [Primary WINS Server] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394] → [WINS Configuration] → [On] → [Secondary WINS Server] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. ❖[IEEE 1394] → [WINS Configuration] → [On] → [Scope ID] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394] → [Host Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 1394] → [Domain Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 802.11b] → [Communication Mode] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 802.11b] → [SSID Setting] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Network Settings 41 1 ❖[IEEE 802.11b] → [Channel] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 802.11b] → [Security Method] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[IEEE 802.11b] → [Transmission Speed] Web Image Monitor:Cannot be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[File Transfer] → [SMTP Server] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer] → [SMTP Authentication] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer] → [POP before SMTP] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer] → [Reception Protocol] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer] → [POP3 / IMAP4 Settings] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 42 1 ❖[File Transfer] → [Administrators E-mail Address] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer] → [E-mail Communication Port] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer] → [E-mail Reception Interval] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer] → [Max. Reception E-mail Size] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer] → [E-mail Storage in Server] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer] → [Default User Name/Password (Send)] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. ❖[File Transfer] → [Fax E-mail Account] Web Image Monitor:Cannot be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Cannot be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals