Ricoh Aficio MP2500LN User Manual
Have a look at the manual Ricoh Aficio MP2500LN User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Network Settings 23 1 IEEE 802.11b (wireless LAN) This section lists the settings required for sending e-mail with IEEE 802.11b (wireless LAN). For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Menu User Tool Setting Requirements Interface Settings/NetworkMachine IPv4 Address Neccessary Interface Settings/NetworkIPv4 Gateway Address Neccessary Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required Interface Settings/NetworkDomain Name As required Interface Settings/NetworkWINS Configuration As required Interface Settings/NetworkEffective Protocol Neccessary Interface Settings/NetworkLAN Type Neccessary Interface Settings/NetworkPermit SNMPv3 Communication As required Interface Settings/NetworkPermit SSL/TLS Communication As required Interface Settings/NetworkHost Name As required Interface Settings/IEEE 802.11bCommunication Mode Neccessary Interface Settings/IEEE 802.11bSSID Setting As required Interface Settings/IEEE 802.11bChannel As required Interface Settings/IEEE 802.11bSecurity Method As required Interface Settings/IEEE 802.11bTransmission Speed As required File Transfer SMTP Server Neccessary File Transfer SMTP Authentication As required File Transfer POP before SMTP As required File Transfer Reception Protocol As required File Transfer POP3 / IMAP4 Settings As required File Transfer Administrators E-mail Address As required File Transfer E-mail Communication Port As required File Transfer Program / Change / Delete E-mail MessageAs required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 24 1 Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in- terface takes precedence. ❒When [POP before SMTP] is set to [On], also make setting for [Reception Protocol] and [POP3 / IMAP4 Settings]. ❒When setting [POP before SMTP] to [On], check[POP3] port number in [E-mail Communication Port]. Reference p.58 “Interface Settings” p.68 “File Transfer” Settings Required to Use Scan to Folder Function This section lists the settings required for sending file. Ethernet This section lists the settings required for sending file with ethernet cable. For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Menu User Tool Setting Requirements Interface Settings/NetworkMachine IPv4 Address Neccessary Interface Settings/NetworkIPv4 Gateway Address Neccessary Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required Interface Settings/NetworkDomain Name As required Interface Settings/NetworkWINS Configuration As required Interface Settings/NetworkEffective Protocol Neccessary Interface Settings/NetworkEthernet Speed As required Interface Settings/NetworkLAN Type Neccessary Interface Settings/NetworkPermit SNMPv3 Communication As required Interface Settings/NetworkPermit SSL/TLS Communication As required Interface Settings/NetworkHost Name As required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required Downloaded From ManualsPrinter.com Manuals
Network Settings 25 1 Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in- terface takes precedence. Reference p.58 “Interface Settings” p.68 “File Transfer” IEEE 1394 (IPv4 over 1394) This section lists the settings required for sending file with IEEE 1394 interface cable. For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Note ❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed. ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. Reference p.58 “Interface Settings” p.68 “File Transfer” Menu User Tool Setting Requirements Interface Settings/IEEE 1394IPv4 Address Neccessary Interface Settings/IEEE 1394DDNS Configuration As required Interface Settings/IEEE 1394Host Name As required Interface Settings/IEEE 1394Domain Name As required Interface Settings/IEEE 1394WINS Configuration As required Interface Settings/IEEE 1394IPv4 over 1394 Neccessary Interface Settings/NetworkIPv4 Gateway Address Neccessary Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkEffective Protocol Neccessary File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 26 1 IEEE 802.11b (wireless LAN) This section lists the settings required for sending file with IEEE 802.11b (wire- less LAN). For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. If both ethernet and wireless LAN (IEEE 802.11b) are con- nected, the selected interface takes precedence. Reference p.58 “Interface Settings” p.68 “File Transfer” Menu User Tool Setting Requirements Interface Settings/NetworkMachine IPv4 Address Neccessary Interface Settings/NetworkIPv4 Gateway Address Neccessary Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required Interface Settings/NetworkDomain Name As required Interface Settings/NetworkWINS Configuration As required Interface Settings/NetworkEffective Protocol Neccessary Interface Settings/NetworkLAN Type Neccessary Interface Settings/NetworkPermit SNMPv3 Communication As required Interface Settings/NetworkPermit SSL/TLS Communication As required Interface Settings/NetworkHost Name As required Interface Settings/IEEE 802.11bCommunication Mode Neccessary Interface Settings/IEEE 802.11bSSID Setting As required Interface Settings/IEEE 802.11bChannel As required Interface Settings/IEEE 802.11bSecurity Method As required Interface Settings/IEEE 802.11bTransmission Speed As required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required Downloaded From ManualsPrinter.com Manuals
Network Settings 27 1 Settings Required to Use the Network Delivery Scanner This section lists the settings required for delivering data to network. Ethernet This section lists the settings required for delivering data to network with ether- net cable. For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. When both ethernet and wireless LAN (IEEE 802.11b) are connected, the se- lected interface takes precedence. ❒If [Delivery Option] is set to [On], check that IPv4 Address is set. Reference p.58 “Interface Settings” p.68 “File Transfer” Menu User Tool Setting Requirements Interface Settings/NetworkMachine IPv4 Address Neccessary Interface Settings/NetworkIPv4 Gateway Address As required Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required Interface Settings/NetworkDomain Name As required Interface Settings/NetworkWINS Configuration As required Interface Settings/NetworkEffective Protocol Neccessary Interface Settings/NetworkEthernet Speed As required Interface Settings/NetworkLAN Type Neccessary Interface Settings/NetworkPermit SNMPv3 Communication As required Interface Settings/NetworkPermit SSL/TLS Communication As required Interface Settings/NetworkHost Name As required File Transfer Delivery Option As required File Transfer Fax RX File Transmission As required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 28 1 IEEE 1394 (IPv4 over 1394) This section lists the settings required for delivering data to network with IEEE 1394 interface cable. For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Note ❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed. ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒If [Delivery Option] is set to [On], check that IPv4 Address is set. Reference p.58 “Interface Settings” p.68 “File Transfer” Menu User Tool Setting Requirements Interface Settings/IEEE 1394IPv4 Address Neccessary Interface Settings/IEEE 1394DDNS Configuration As required Interface Settings/IEEE 1394Host Name As required Interface Settings/IEEE 1394Domain Name As required Interface Settings/IEEE 1394WINS Configuration As required Interface Settings/IEEE 1394IPv4 over 1394 Neccessary Interface Settings/NetworkIPv4 Gateway Address As required Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkEffective Protocol Neccessary File Transfer Delivery Option As required File Transfer Fax RX File Transmission As required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required Downloaded From ManualsPrinter.com Manuals
Network Settings 29 1 IEEE 802.11b (wireless LAN) This section lists the settings required for delivering data to network with IEEE 802.11b (wireless LAN). For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. ❒If [Delivery Option] is set to [On], check that IPv4 Address is set. Reference p.58 “Interface Settings” p.68 “File Transfer” Menu User Tool Setting Requirements Interface Settings/NetworkMachine IPv4 Address Neccessary Interface Settings/NetworkIPv4 Gateway Address As required Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required Interface Settings/NetworkDomain Name As required Interface Settings/NetworkWINS Configuration As required Interface Settings/NetworkEffective Protocol Neccessary Interface Settings/NetworkLAN Type Neccessary Interface Settings/NetworkPermit SNMPv3 Communication As required Interface Settings/NetworkPermit SSL/TLS Communication As required Interface Settings/NetworkHost Name As required Interface Settings/IEEE 802.11bCommunication Mode Neccessary Interface Settings/IEEE 802.11bSSID Setting As required Interface Settings/IEEE 802.11bChannel As required Interface Settings/IEEE 802.11bSecurity Method As required Interface Settings/IEEE 802.11bTransmission Speed As required File Transfer Delivery Option As required File Transfer Fax RX File Transmission As required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 30 1 Settings Required to Use Network TWAIN Scanner This section lists the settings required for using TWAIN Scanner under the net- work environment. Ethernet This section lists the settings required for using network TWAIN Scanner with Ethernet cable. For details about how to specify the settings, see “Interface Settings”. Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se- lected interface takes precedence. Reference p.58 “Interface Settings” Menu User Tool Setting Requirements Interface Settings/NetworkMachine IPv4 Address Neccessary Interface Settings/NetworkIPv4 Gateway Address As required Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required Interface Settings/NetworkDomain Name As required Interface Settings/NetworkWINS Configuration As required Interface Settings/NetworkEffective Protocol Neccessary Interface Settings/NetworkLAN Type Neccessary Interface Settings/NetworkEthernet Speed As required Interface Settings/NetworkPermit SNMPv3 Communication As required Interface Settings/NetworkPermit SSL/TLS Communication As required Interface Settings/NetworkHost Name As required Downloaded From ManualsPrinter.com Manuals
Network Settings 31 1 IEEE 1394 (IPv4 over 1394) This section lists the settings required for using network TWAIN Scanner with IEEE 1394 interface cable. For details about how to specify the settings, see “Interface Settings” and “File Transfer”. Note ❒[IEEE 1394] is displayed when the IEEE 1394 interface board is installed. ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. Reference p.58 “Interface Settings” IEEE 802.11b (wireless LAN) This section lists the settings required for using network TWAIN Scanner with IEEE 802.11b (wireless LAN). For details about how to specify the settings, see “Interface Settings”. Menu User Tool Setting Requirements Interface Settings/IEEE 1394IPv4 Address Neccessary Interface Settings/IEEE 1394DDNS Configuration As required Interface Settings/IEEE 1394Host Name As required Interface Settings/IEEE 1394Domain Name As required Interface Settings/IEEE 1394WINS Configuration As required Interface Settings/IEEE 1394IPv4 over 1394 Neccessary Interface Settings/NetworkIPv4 Gateway Address As required Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkEffective Protocol Neccessary Menu User Tool Setting Requirements Interface Settings/NetworkMachine IPv4 Address Neccessary Interface Settings/NetworkIPv4 Gateway Address As required Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required Interface Settings/NetworkDomain Name As required Interface Settings/NetworkWINS Configuration As required Interface Settings/NetworkEffective Protocol Neccessary Interface Settings/NetworkLAN Type Neccessary Interface Settings/NetworkPermit SNMPv3 Communication As required Interface Settings/NetworkPermit SSL/TLS Communication As required Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 32 1 Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.58 “Interface Settings” Settings Required to Use Document Server This section lists the settings required for using Document Server function under the network environment. Ethernet This section lists the settings required for using Document Server function with Ethernet cable. For details about how to specify the settings, see “Interface Settings”. Interface Settings/NetworkHost Name As required Interface Settings/IEEE 802.11bCommunication Mode Neccessary Interface Settings/IEEE 802.11bSSID Setting As required Interface Settings/IEEE 802.11bChannel As required Interface Settings/IEEE 802.11bSecurity Method As required Interface Settings/IEEE 802.11bTransmission Speed As required Menu User Tool Setting Requirements Interface Settings/NetworkMachine IPv4 Address Neccessary Interface Settings/NetworkIPv4 Gateway Address As required Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required Interface Settings/NetworkDomain Name As required Interface Settings/NetworkWINS Configuration As required Interface Settings/NetworkEffective Protocol Neccessary Interface Settings/NetworkEthernet Speed As required Interface Settings/NetworkLAN Type Neccessary Interface Settings/NetworkPermit SNMPv3 Communication As required Interface Settings/NetworkPermit SSL/TLS Communication As required Interface Settings/NetworkHost Name As required Menu User Tool Setting Requirements Downloaded From ManualsPrinter.com Manuals