Panasonic Kx-Td500 Features Guide
Have a look at the manual Panasonic Kx-Td500 Features Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
CFeatures Guide 42 Features Guide Call Forwarding Ð All Calls DescriptionAll incoming calls to an extension are automatically redirected to the pre-assigned extension regardless of the status of the called extension. Conditions¥Applicable Call Types This feature applies to the following calls: Outside calls Ð DIL 1:1; DISA; Intercept Routing; TIE; DID Intercom calls Ð Extension; Transfer ¥Floating Station A Floating Station cannot be programmed as the destination of this feature. ¥Forwarded call is not forwarded furthermore There can be only one stage of Call Forwarding. If a call is forwarded to an extension in Call Forwarding mode, the call is not forwarded furthermore. ¥Message Waiting Although calls are forwarded, Message Waiting is not. The MESSAGE button indicator is lit on the originally called extension. ¥Station Hunting Station Hunting applies to calls forwarded to a busy extension in a Station Hunting group. ¥ An extension user may have only one type of Call Forwarding / Do Not Disturb feature in effect at any time. If one of Call Forwarding / Do Not Disturb feature is assigned, another does not function but the assignment itself is preserved for future use. The extension user can choose either one by pressing the FWD/DND button while on-hook. In this case, pressing the button changes the settings as follows: ®DND ®FWD ®Off The lighting patterns of the FWD/DND button are as follows: Off : Both functions are canceled. Red on : DND mode This setting can be changed Red flash : FWD mode by System Programming. ¥Station Programming mode This feature functions even if the extension is in Station Programming mode. ¥ Remote FWD (Call Forwarding) Cancel - Once The Manager and the Operators can reach an extension that has set Call Forwarding. ¥FWD/DND button Regarding the PT (7050/7055/7250) without the FWD/DND button, it can be assigned to a flexible (CO, DSS, PF) button by Station, User or System Programming. ¥Distinctive Dial Tone Distinctive Dial Tone is sent to the user on the extension with this fea- ture when the extension user goes off-hook.
Features GuideC Features Guide 43 Programming References System Programming................................Installation Manual, Section 4 4.2.2 System - Numbering Plan Ñ (42) Call FWD - Do Not Disturb Set/Cancel 4.2.7 System - System Option Ñ (15) Special dial tone after setting feature Ñ (33) FWD / DND lamp pattern 4.4.2 Line - Extension Line Ñ Flexible CO/PF Key Assignment 4.4.3 Line - DSS Console Ñ Flexible DSS/PF Key Assignment User Programming...............................................User Manual, Section 3 [005] Flexible CO Button Assignment Station Programming...........................................User Manual, Section 2 Flexible Button Assignment Ð FWD/DND Button Feature ReferencesNone Operation ReferencesStation Features and Operation.......................User Manual, Section 4.3 Call Forwarding Ñ All Calls
CFeatures Guide 44 Features Guide Call Forwarding Ð Busy DescriptionIncoming calls to an extension are re-directed to the pre-assigned extension if the called extension is busy. Conditions¥Applicable Call Types This feature applies to the following calls. Outside calls Ð DIL 1:1; DISA; Intercept Routing; TIE; DID Intercom calls Ð Extension; Transfer ¥Floating Station A Floating Station cannot be programmed as the destination of this feature. ¥Forwarded call is not forwarded furthermore There can be only one stage of Call Forwarding. If a call is forwarded to an extension in Call Forwarding mode, the call is not forwarded furthermore. ¥Message Waiting Although calls are forwarded, Message Waiting is not. The MESSAGE button indicator is lit on the originally called extension. ¥Station Hunting Station Hunting applies to calls forwarded to a busy extension in a Station Hunting group. ¥ An extension user may have only one type of Call Forwarding / Do Not Disturb feature in effect at any time. If one of Call Forwarding / Do Not Disturb feature is assigned, another does not function but the assignment itself is preserved for future use. The extension user can choose either one by pressing the FWD/DND button while on-hook. In this case, pressing the button changes the setting as follows: ®DND ®FWD ®Off The lighting patterns of the FWD/DND button are as follows: Off : Both functions are canceled. Red on : DND mode This setting can be changed Red flash : FWD mode by System Programming. ¥Remote FWD (Call Forwarding) Cancel - Once The Manager and the Operators can reach an extension that has set Call Forwarding. ¥FWD/DND button Regarding the PT (7050/7055/7250) without the FWD/DND button, it can be assigned to a flexible (CO, DSS, PF) button by Station, User or System Programming. ¥Distinctive Dial Tone Distinctive Dial Tone is sent to the user on the extension with this fea- ture when the extension user goes off-hook.
Features GuideC Features Guide 45 Programming References System Programming................................Installation Manual, Section 4 4.2.2 System - Numbering Plan Ñ (42) Call FWD - Do Not Disturb Set/Cancel 4.2.7 System - System Option Ñ (15) Special dial tone after setting feature Ñ (33) FWD / DND lamp pattern 4.4.2 Line - Extension Line Ñ Flexible CO/PF Key Assignment 4.4.3 Line - DSS Console Ñ Flexible DSS/PF Key Assignment User Programming...............................................User Manual, Section 3 [005] Flexible CO Button Assignment Station Programming...........................................User Manual, Section 2 Flexible Button Assignment Ð FWD/DND Button Feature ReferencesNone Operation ReferencesStation Features and Operation.......................User Manual, Section 4.3 Call Forwarding Ñ Busy
CFeatures Guide 46 Features Guide Call Forwarding Ð Busy / No Answer DescriptionIncoming calls to an extension are re-directed to the pre-assigned extension if the called extension is busy or the call was not answered within a pre-determined time. Conditions¥Applicable Call Types This feature applies to the following calls. Outside calls Ð DIL 1:1; DISA; Intercept Routing; TIE; DID Intercom calls Ð Extension; Transfer ¥Floating Station A Floating Station cannot be programmed as the destination of this feature. ¥ This feature operates the same way as Call Forwarding Ð Busy and Call Forwarding Ð No Answer. ¥Forwarded call is not forwarded furthermore There can be only one stage of Call Forwarding. If a call is forwarded to an extension in Call Forwarding mode, the call is not forwarded furthermore. ¥Message Waiting Although calls are forwarded, Message Waiting is not. The MESSAGE button indicator is lit on the originally called extension. ¥Station Hunting Station Hunting applies to calls forwarded to a busy extension in a Station Hunting group. ¥ An extension user may have only one type of Call Forwarding / Do Not Disturb feature in effect at any time. If one of Call Forwarding / Do Not Disturb feature is assigned, another does not function but the assignment itself is preserved for future use. The extension user can choose either one by pressing the FWD/DND button while on-hook. In this case, pressing the button changes the settings as follows: ®DND ®FWD ®Off The lighting patterns of the FWD/DND button are as follows: Off : Both functions are canceled. Red on : DND mode This setting can be changed Red flash : FWD mode by System Programming. ¥Remote FWD (Call Forwarding) Cancel - Once The Manager and the Operators can reach an extension that has set Call Forwarding. ¥FWD/DND button Regarding the PT (7050/7055/7250) without the FWD/DND button, it can be assigned to a flexible (CO, DSS, PF) button by Station, User or System Programming. ¥Distinctive Dial Tone Distinctive Dial Tone is sent to the user on the extension with this fea- ture when the extension user goes off-hook.
Features GuideC Features Guide 47 Programming References System Programming................................Installation Manual, Section 4 4.2.2 System - Numbering Plan Ñ (42) Call FWD - Do Not Disturb Set/Cancel 4.2.4 System - System Timer ÑCall Forwarding-No Answer Time (1-12 rings) 4.2.7 System - Numbering Plan Ñ (15) Special dial tone after setting feature Ñ (33) FWD / DND lamp pattern 4.4.2 Line - Extension Line Ñ Flexible CO/PF Key Assignment 4.4.3 Line - DSS Console Ñ Flexible DSS/PF Key Assignment User Programming...............................................User Manual, Section 3 [005] Flexible CO Button Assignment Station Programming...........................................User Manual, Section 2 Flexible Button Assignment Ð FWD/DND Button Feature ReferencesCall Forwarding Ð Busy Call Forwarding Ð No Answer Operation ReferencesStation Features and Operation.......................User Manual, Section 4.3 Call Forwarding Ñ Busy / No Answer
CFeatures Guide 48 Features Guide Call Forwarding Ð Follow Me DescriptionIf you forget to set Call Forwarding Ð All Calls before you leave your desk, you can set the same function from the destination extension. Conditions¥ Class of Service Class of Service programming determines the extension that can per- form this feature. ¥ Other conditions are the same as that of Call Forwarding Ð All Calls. Programming References System Programming................................Installation Manual, Section 4 4.2.2 System - Numbering Plan Ñ (42) Call FWD - Do Not Disturb Set/Cancel 4.2.3 System - Class of Service Ñ Call FWD Follow Me 4.4.2 Line - Extension Line Ñ Flexible CO/PF Key Assignment 4.4.3 Line - DSS Console Ñ Flexible DSS/PF Key Assignment User Programming...............................................User Manual, Section 3 [005] Flexible CO Button Assignment Station Programming...........................................User Manual, Section 2 Flexible Button Assignment Ð FWD / DND Button Feature ReferencesCall Forwarding Ð All Calls Operation ReferencesStation Features and Operation.......................User Manual, Section 4.3 Call Forwarding Ñ Follow Me
Features GuideC Features Guide 49 Call Forwarding Ð No Answer DescriptionIncoming calls to an extension are re-directed to the pre-assigned extension if they are not answered within a specified period of time. Conditions¥Applicable Call Types This feature applies to the following calls: Outside calls Ð DIL 1:1; DISA; Intercept Routing; TIE; DID Intercom calls Ð Extension; Transfer ¥Floating Station A Floating Station cannot be programmed as the destination of this feature. ¥Call Forwarding-No Answer Time This feature operates if an incoming call is not answered (including a busy status) in a specified period of time (Call Forwarding-No Answer Time). ¥Forwarded call is not forwarded furthermore There can be only one stage of Call Forwarding. If a call is forwarded to an extension in Call Forwarding mode, the call is not forwarded furthermore. ¥Message Waiting Although calls are forwarded, Message Waiting is not. The MESSAGE button indicator is lit on the originally called extension. ¥Station Hunting Station Hunting applies to calls forwarded to a busy extension in a Station Hunting group. ¥ An extension user may have only one type of Call Forwarding / Do Not Disturb feature in effect at any time. If one of Call Forwarding / Do Not Disturb feature is assigned, another does not function but the assignment itself is preserved for future use. The extension user can choose either one by pressing the FWD/DND button while on-hook. In this case, pressing the button changes the settings as follows: ®DND ®FWD ®Off The lighting patterns of the FWD/DND button are as follows: Off : Both functions are canceled. Red on : DND mode This setting can be changed Red flash : FWD mode by System Programming. ¥Remote FWD (Call Forwarding) Cancel - Once The Manager and the Operators can reach an extension that has set Call Forwarding. ¥FWD/DND button Regarding the PT (7050/7055/7250) without the FWD/DND button, it can be assigned to a flexible (CO, DSS, PF) button by Station, User or System Programming. ¥Distinctive Dial Tone Distinctive Dial Tone is sent to the user on the extension with this fea- ture when the extension user goes off-hook.
CFeatures Guide 50 Features Guide Programming References System Programming................................Installation Manual, Section 4 4.2.2 System - Numbering Plan Ñ (42) Call FWD - Do Not Disturb Set/Cancel 4.2.4 System - System Timer Ñ Call Forwarding-No Answer Time (1-12 rings) 4.2.7 System - System Option Ñ (15) Special dial tone after setting feature Ñ (33) FWD / DND lamp pattern 4.4.2 Line - Extension Line Ñ Flexible CO/PF Key Assignment 4.4.3 Line - DSS Console Ñ Flexible DSS/PF Key Assignment User Programming...............................................User Manual, Section 3 [005] Flexible CO Button Assignment Station Programming...........................................User Manual, Section 2 Flexible Button Assignment Ð FWD/DND Button Feature ReferencesNone Operation ReferencesStation Features and Operation.......................User Manual, Section 4.3 Call Forwarding Ñ No Answer
Features GuideC Features Guide 51 Call Forwarding Ð to CO / TIE DescriptionAll incoming calls to an extension are automatically re-directed to the pre-assigned outside party via a CO line or a TIE line regard- less of the status of the called extension. Conditions¥Applicable Call Types This feature applies to the following calls: Outside calls Ð DIL 1:1; DISA; TIE; DID Intercom calls Ð Extension; Transfer ¥Class of Service Class of Service programming determines the extensions that can per- form this feature. ¥Treatment of the forwarded call Toll Restriction, Automatic Route Selection (ARS) and Account Code Entry requirements of the extension in Call Forwarding mode still apply to the call forwarded by this feature. ¥ An extension user may have only one type of Call Forwarding / Do Not Disturb feature in effect at any time. If one of Call Forwarding / Do Not Disturb feature is assigned, another does not function but the assignment itself is preserved for future use. The extension user can choose either one by pressing the FWD/DND button while on-hook. In this case, pressing the button changes the settings as follows: ®DND ®FWD ®Off The lighting patterns of the FWD/DND button are as follows: Off : Both functions are canceled. Red on : DND mode This setting can be changed Red flash : FWD mode by System Programming. ¥Extension-to-CO Line Call If a call between an extension and an outside party is established by this feature, the call duration can be restricted by the system timer ÒExtension-to-CO Line Call Duration Time (1-64 min.)Ó. ¥CO-to-CO Line Call If a call between two outside parties is established by this feature, the call duration is determined by ÒCO-to-CO Line Call Duration Time (1- 64 min.)Ó. An alarm tone is sent to both outside parties 15 seconds before the time-out. The call is disconnected at the time-out. ¥Remote FWD (Call Forwarding) Cancel - Once The Manager and the Operators can reach an extension that has set Call Forwarding. ¥FWD/DND button Regarding the PT (7050/7055/7250) without the FWD/DND button, it can be assigned to a flexible (CO, DSS, PF) button by Station, User or System Programming.