Panasonic Kx-Td500 Features Guide
Have a look at the manual Panasonic Kx-Td500 Features Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
RFeatures Guide 212 Features Guide Operation ReferencesOperator/Manager Service Features...............User Manual, Section 4.4 Call Log Lock Control, Incoming Live Call Screening Password Control Remote DND (Do Not Disturb) Control Remote FWD (Call Forwarding) Cancel - Once Remote Station Lock Control Timed Reminder, Remote (Wake-Up Call)
Features GuideR Features Guide 213 Remote Station Lock Control DescriptionAllows the Manager and the Operators to lock other extensions remotely, that is, from their own extensions. Locked extensions cannot be used for making calls, either outside calls or intercom calls (except calls to the Operators and the emer- gency calls) depending on the setting. Conditions¥ Electronic Station Lockout Override ÒRemote Station Lock ControlÓ overrides ÒElectronic Station Lockout.Ó If Station Lockout has already been set by the extension user and Remote Station Lock is set by the Manager or an Operator, canceling the lock is only possible by the Manager or an Operator. Programming References Station Programming..........................................User Manual, Section 2 Remote Station Lock Control Feature ReferencesElectronic Station Lockout Manager Extension Operation ReferencesOperator/Manager Service Features...............User Manual, Section 4.4 Remote Station Lock Control
RFeatures Guide 214 Features Guide Ringing, Delayed DescriptionThe extension can be set to ring immediately, delayed ringing, or no ringing. Conditions¥DIL 1:N Call When a DIL 1:N call (an outside call directed to multiple extensions) comes in, all destination extensions ring immediately by default. This setting can be changed to delayed ringing or no ringing on each mem- ber of the DIL 1:N Group basis. ¥ At an ICM type PT, this feature does not apply to DISA or DIL 1:1 calls. ¥ Line Ringing Selection is assignable on a DN button (PDN, SDN) basis. However, if Direct In Lines (DIL) 1:N is established, Line Ringing Selection is determined by DIL 1:N incoming call group set- ting. ÒPDN / SDN Button Delayed Ringing AssignmentÓ does not function for a call which comes in on a Ring Group extension or Phantom extension. ¥ Answering a no-ringing call If delayed ringing or no ringing is assigned to an extension, the exten- sion can answer an incoming call during no ring or the delay time by pressing the flashing button. Programming References System Programming................................Installation Manual, Section 4 4.3.4 Group - DIL 1:N Group Ñ Ringing Type 4.4.2 Line - Extension Line Ñ Flexible CO Key Assignment User Programming...............................................User Manual, Section 3 [005] Flexible CO Button Assignment Station Programming...........................................User Manual, Section 2 PDN/SDN Key delayed ringing assignment Feature ReferencesDirect In Lines (DIL) Operation ReferencesNot applicable.
Features GuideR Features Guide 215 Ringing, Discriminating DescriptionAllows the extension user to identify the incoming call by the ring- ing pattern (See Section 6.1 ÒTone / Ring ToneÓ in the Installation Manual). Conditions¥ Call Ringing Priority When there are multiple incoming calls and the extension goes from off-hook to on-hook, the calls ring according to the following priority: Consultation Hold Recall An incoming call from a line in which the Prime Line Preference Ð Incoming function has been set (PT only) Call Waiting Incoming calls; Hold Recall; Transfer Recall; Unattended Conference Recall Timed Reminder Automatic callback ¥ Prime Line Preference-Incoming When multiple calls are ringing simultaneously at a PT on which ÒPrime Line Preference - IncomingÓ feature is assigned, the extension user can answer the call on the prime line simply by going off-hook. ¥ Ringing Tone Type Selection The DPT user can select a desired ringing tone type for CO buttons. Programming References Station Programming...........................................User Manual, Section 2 Ringing Tone Selection for CO Buttons Feature ReferencesRinging Tone Selection Operation ReferencesNot applicable.
RFeatures Guide 216 Features Guide Ringing Tone Selection DescriptionAllows the DPT user to select one of eight ringer frequencies for each line access button (ICM, CO, DN). This is useful to distin- guish the type of incoming calls by ringing. ConditionsNone Programming References System Programming................................Installation Manual, Section 4 4.4.2 Line - Extension Line Ñ Flexible CO Key Assignment 4.4.3 Line - DSS Console Ñ Flexible DSS Key Assignment User Programming...............................................User Manual, Section 3 [005] Flexible CO Button Assignment Station Programming...........................................User Manual, Section 2 Flexible Button Assignment Ringing Tone Selection for CO Buttons Ringing Tone Selection for INTERCOM Button Feature ReferencesNone Operation ReferencesNot applicable.
Features GuideR Features Guide 217 Ringing Transfer DescriptionIf the Extension 100 has an SDN button which corresponds with the PDN button of the Extension 200 (PDN owner), the Extension 100 can transfer the call on the SDN button to the Extension 200 with a simple operation. This is called ÒRinging Transfer.Ó Conditions¥SDN button SDN button can be assigned to a flexible CO button on a DN type PT by Station, User or System Programming. ¥FWD/DND Override The call transferred by this feature overrides FWD (Call For waring)/ DND (Do Not Disturb) feature assigned on the PDN owner extension. ¥A call made by this feature rings the destination PDN button immedi- ately even if delayed ringing or no ring has been set on that PDN but- ton. Refer to PDN/SDN Button Delayed Ringing Assignment in Section 2 of the User Manual. Programming References System Programming................................Installation Manual, Section 4 4.2.2 Line - Extension Line Ñ Flexible CO Key Assignment User Programming...............................................User Manual, Section 3 [005] Flexible CO Button Assignment Station Programming...........................................User Manual, Section 2 Flexible Button Assignment Ñ Secondary Directory Number (SDN) Button Feature ReferencesNone Operation ReferencesStation Features and Operation.......................User Manual, Section 4.3 Ringing Transfer
SFeatures Guide 218 Features Guide Secret Dialing DescriptionUsed to conceal all or part of a registered telephone number that normally appears on the display. Secret Dialing applies to the following features: ¥ One-Touch Dialing ¥ System Speed Dialing ¥ Station Speed Dialing(Special Display Features) When a display PT user makes a call using a telephone number with Secret Dialing, all or part of the number does not appear on the display. Conditions¥ CO line access code must be placed before placing ÔsÕ or Ô[Õ. ¥ One or more parts of a telephone number can be concealed. ¥ The concealed part will be printed out by SMDR. Programming References System Programming................................Installation Manual, Section 4 4.5.1 Features - System Speed Dialing Station Programming...........................................User Manual, Section 2 Flexible Button Assignment Ð One-Touch Dialing Button Feature ReferencesOne-Touch Dialing SPECIAL DISPLAY FEATURES System Speed Dialing Ñ Call Directory - Station Speed Dialing Operation ReferencesStation Features and Operation.......................User Manual, Section 4.3 Secret Dialing
Features GuideS Features Guide 219 SPECIAL DISPLAY FEATURES Ñ SUMMARY With the display telephone, KX-T7235, KX-T7431, KX-T7433 or KX-T7436, the extension user can easily access several features. The display telephones have the ability to perform the following features. Ò4Ó indicates the feature is available. Feature Call Directory Extension Dialing Station Speed Dialing System Speed Dialing Call Forwarding / Do Not Disturb Call Log, Outgoing System Feature Access MenuKX-T7235 4 4 4 4 4 4 4 KX-T7433 4 4 4 4 4 KX-T7436 4 4 4 4 4 4 4 KX-T7431 4 4 4 4 4
SFeatures Guide 220 Features Guide Special Display Features Call Directory Ñ Extension Dialing DescriptionProvides a display of extension names. This is convenient to make an extension call just by name. The extension user can call another extension simply by pressing the Function button associated with the name. Conditions¥ Extension name can be programmed either by User or System Programming. ¥ Tenant Service If Tenant Service is employed, only the extension names within the same tenant are displayed. Programming References System Programming................................Installation Manual, Section 4 4.4.2 Line - Extension Line Ñ Name User Programming...............................................User Manual, Section 3 [004] Extension Name Set Feature ReferencesNone Operation ReferencesSpecial Display Features...................................User Manual, Section 4.5 Call Directory Ñ Extension Dialing
Features GuideS Features Guide 221 Special Display Features Call DirectoryÑ Station Speed Dialing DescriptionA list of the names and telephone numbers stored in One-Touch Dialing is displayed. This allows the extension user to make a One- Touch call by knowing just the name. Conditions¥ It is necessary to program One-Touch Dialing Numbers and Names into one of the 10 Function buttons (F1 through F10). ¥Initial Display Selection Initial display of Station Speed Dialing display can be number or name. An extension user can choose either by Station or System Programming. Programming References System Programming................................Installation Manual, Section 4 4.2.7 System - System Option Ñ (10) Station Speed Dialing Initial Display Station Programming...........................................User Manual, Section 2 Station Speed Dialing Number / Name Assignment Feature ReferencesOne-Touch Dialing Operation ReferencesSpecial Display Features...................................User Manual, Section 4.5 Call Directory Ñ Station Speed Dialing