Panasonic Kx-Td500 Features Guide

							TFeatures Guide
282 Features Guide
Programming References
System Programming................................Installation Manual, Section 4
4.1.1  Configuration - Slot Assignment
(TSW Card Configuration)
Ñ System Clock Status
Ñ Clock Configuration Mode
Ñ Clock Configuration Master Card No.
Ñ Clock Configuration Priority 1-8
4.1.5  Configuration - T1 Port Assignment
Feature ReferencesNone
Operation ReferencesNot applicable.   
						

							Features GuideU
Features Guide 283
User Programming 
DescriptionAllows a PT user to assign or change the following System
Programming items at his/her own PT.
Conditions¥ User Programming Password is required to perform User
Programming.
Programming References
System Programming................................Installation Manual, Section 4
4.10.4  Maintenance - System Parameters
Ñ Password
User Programming
User Programming ..............................................User Manual, Section 3
Feature ReferencesNone
Operation ReferencesNot applicable.
Access No.
000
001
002
004
005
006
007
008
009Title
System Date/Time
System Speed Dial Number
System Speed Dial Name
Extension Name
Flexible CO buttons
Caller ID Dial
Caller ID Name
Absent Messages
Quick Dial Number 
						

							VFeatures Guide
284 Features Guide
Volume Control Ð Speaker/Handset Receiver/Headset/Ringer
DescriptionAllows the PT user to change the following as desired:
Handset receiver volume 
Headset volume
Ringer volume
Speaker volume 
Conditions¥ The control method depends on the telephone type:
[KX-T7400 series DPTs]
Ñ Rotate the Jog Dial in the desired direction.
[KX-T7200 series DPTs]
Ñ Press the volume control button (UPÙ/ DOWN Ú) to select a
desired volume level.  However the ringer volume of KX-T7220
and KX-T7250 is selected with Ringer Volume Selector (OFF /
LOW / HIGH).
[APTs]
Ñ Slide the following levers located on the left side of the telephone.
Volume Control (MIN Ð MAX)
Handset Headset 
Volume Selector (NORMAL / MID / HIGH)
Ringer Volume Selector (OFF / LOW / HIGH) 
Programming References
No programming required.
Feature ReferencesNone
Operation ReferencesConfiguration.....................................................User Manual, Section 1.1
Volume Control Ð Handset Receiver/Headset/Ringer/Speaker 
						

							Features GuideV
Features Guide 285
VPS INTEGRATION Ð SUMMARY
DescriptionThe Voice Processing System(VPS) provides Automated Attendant
and Voice Mail Services. The KX-TD500 System works well with
all Panasonic KX-TVS series Voice Processing System (VPS) and
it can be programmed to work with most other manufacturesÕ VPSs
that fully support Inband Integration.
However, since both the PBX and VPS are independent systems,
ÒIntegrationÓ with the VPS is necessary to make the two systems
work more closely.
Without integration, both systems will work separately without
knowing the status of other system.
How the KX-TD500 System communicate with 
VPS:
(1) Inband Integration
The KX-TD500 System sends the VPS several codes with DTMF
tone via speech path. Available with not only Panasonic KX-TVS
series VPSs but with most other manufacturesÕ VPSs that fully sup-
port Inband Integration.
(2) DPT Integration
The KX-TD500 System sends the VPS the information and com-
mands over the DPT data link. Available with Panasonic KX-TVS
series VPS only.
A
vailable features:
(a) VM (Voice Mail) Service Integration
Allows the caller to leave a message in the mailbox of their
destination party without knowing the mailbox number.
(b) AA (Automated Attendant) Service Integration
Used to improve the call handling performance of the VPS.
(c) Special features for DPT Integration (DPT Integration only)
Ð Auto  Configuration
Ð Live Call Screening (LCS)
Ð Two-way Recording
Ð Two-way Transfer 
						

							VFeatures Guide
286 Features Guide
Outline sketch of VPS Integration
VPS Integration
Inband
Integration
DPT
Integration
VM Service Integration 
[Follow-on ID]
AA Service Integration
[Call Status Code]
Automatic Configuration
Live Call Screening
Two-Way Recording
Two-Way Transfer 
						

							Features GuideV(A)
Features Guide 287
VPS Integration Ñ Automated Attendant (AA) Service Integration
DescriptionThis is one of the VPS Integration features.
With AA Service Integration, the KX-TD500 System transmits the
call status code (busy, answered, ringing, disconnected, etc.) before
sending the normal call progress tones to an AA extension. These
codes enable the VPS to immediately recognize the current status
of the call and improve its call handling performance.  
Outside Call
ExtensionAA 1AA 2
AA XAA 3
Extension Group
(AA)
VPS
DIL 1:1, DISA, DID, TIE
Transfer
System 
						

							V(A)Features Guide
288 Features Guide
Integration Code Table
Code
(default)
1
2
3
4
5
6
7
8
9
#9Sent to the Voice Mail Port When
The extension dialed is ringing.
The extension dialed is busy.
An invalid extension number is dialed or the call
is inadvertently connected to another Voice Mail
port (also heard when no DTMF receiver is
available to the Voice Mail extension).
The extension dialed has set DND feature (Do
Not Disturb).
The extension dialed is answered.
The extension dialed is forwarded to Voice Mail
and another Voice Mail port is able to answer.
(This lets the first Voice Mail port, usually an
Automated Attendant, send the call to the other
Voice Mail port.)
The extension dialed is forwarded to Voice Mail
and no other Voice Mail ports are available to
accept the call. (This signals the Voice Mail port
[usually Automated Attendant] to let the caller to
leave a message.)
The extension dialed is forwarded to another,
non-Voice Mail extension.
The Message Waiting Lamp On or Message
Waiting Lamp Off code is dialed successfully.
The caller disconnects. The central office must
set a CPC signal to the PBX line for this signal
to work for CO calls. Call State
Ring-back Tone
Busy Tone
Reorder Tone
DND
Answer
Forwarded to Voice Mail
(Ringing)
Forwarded to Voice Mail
(Busy)
Forwarded to Ext.
Confirmation Tone
Disconnect 
						

							Features GuideV(A)
Features Guide 289
Conditions¥Start AA Service after FWD, IRNA of CO call
When an outside call is routed to a VM port by Call Forwarding or
IRNA feature, AA Service can be activated instead of VM Service by
System Programming.
¥Call from AA port to AA port
Prevents or allows a call originated by an AA port of VPS to another
AA port.
Programming References
System Programming................................Installation Manual, Section 4
4.1.4  Configuration - VPS (DPT) Port Assignment
4.3.2  Group - Extension Group
Ñ FDN
Ñ Group Type
Ñ Tenant No.
Ñ Overflow Setting
Destination, Day/Night
Overflow Time
4.4.2  Line - Extension Line
Ñ Group No.
Ñ COS No.
Ñ Mailbox No.
4.5.9.1  Features - VPS Integration (1/2)
ÑIntegration Codes
4.5.9.2  Features - VPS Integration (2/2)
Ñ Start AA service after FWD, IRNA of CO call
Ñ Call from AA port to AA port
Feature ReferencesDPT Integration Inband Integration 
VPS Integration
Operation ReferencesNot applicable. 
						

							290 Features Guide
Features GuideV(D)
VPS Integration Ñ DPT Integration  
DescriptionThis is one of the VPS Integration features. 
With DPT Integration, the KX-TD500 System sends the VPS the
information and commands on the calling extension via DPT inter-
faced data link to help it work more effectively. This is available
only with Panasonic KX-TVS series VPS.
Using the information and commands, the VPS can:
(1) identify the extension number of the caller
(2) know where the call is forwarded from and its line status
(3) recognize what the caller wants to do.
In addition to VM Service Integration and AA Service Integration,
following special features are available only with DPT Integration.
- Auto  Configuration
- Live Call Screening
- Two-Way Recording
- Two-Way Transfer
Conditions¥A maximum of eight Panasonic Voice Processing Systems can be con-
nected to the KX-TD500 system.
¥ To utilize this feature, DOHCA Card (KX-TD50105) and DLC card
(KX-TD50172) / DHLC card (KX-TD50170) are required.
¥
Only one Panasonic Voice Processing System can be connected to a
DHLC/DLC card.
¥ The jack with the lowest physical number of the DHLC/DLC card must
be connected to the VPS port with the lowest physical number.
Programming References
System Programming................................Installation Manual, Section 4
4.1.1  Configuration - Slot Assignment
4.1.3  Configuration - Extension Port Assignment
Ñ Card No.
Ñ Attribute
4.1.4  Configuration - VPS (DPT) Port Assignment
Ñ TVS No.
Ñ VPS Card
Ñ Type
Ñ Jack No.
Ñ Port No.
Ñ Ext No.1
DN
Group No.
Ñ Ext No.2
DN
Group No.
 
: Available when the Digital Super Hybrid System is connected to a Digital
Proprietary Telephone capable Panasonic Voice Processing System (one
that supports Digital Proprietary Telephone integration; e.g. KX-TVS100). 
						

							Features Guide 291
V(D)Features Guide
Ñ Status
4.3.1  Group - Trunk Group
Ñ Intercept Destination, Day/Night
4.3.2  Group - Extension Group
Ñ Group No.
Ñ FDN
Ñ Group Type
Ñ Tenant No.
Ñ Overflow Setting 
Destination, Day/Night
4.4.1  Line - Trunk Line
Ñ Incoming Type
Ñ Destination, Day/Night
4.4.2  Line - Extension Line
Ñ Group No.
Ñ COS No.
Ñ Mailbox No.
4.5.9.1  Features - VPS Integration 2/2
Ñ Turn off control of Message Waiting Lamp
Ñ ExtensionÕs mailbox number
Feature ReferencesVPS Integration
Operation ReferencesNot applicable.