Panasonic Kx-Td500 Features Guide
Have a look at the manual Panasonic Kx-Td500 Features Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
BFeatures Guide 22 Features Guide Busy Station Signaling (BSS) DescriptionUsed to prompt a busy extension (engaged in a call) to answer a new incoming call. When BSS is activated by the calling exten- sion, a call waiting tone is generated at the busy extension to inform that another call is waiting. Conditions ¥ BSS feature functions, if the other busy extension is an ICM type PT in the following state: (1) The extension is off-hooked. (2) ICM button is idle. (3) ÒCall WaitingÓ is enabled. ¥ BSS feature does not function, if the other busy extension is a DN type PT. ¥BSS / OHCA / Whisper OHCA If an extension user dials Ò1Ó while hearing a busy tone, BSS or OHCA or Whisper OHCA may be activated at the called extension. This is determined by the following conditions. *1: OHCA (Off-Hook Call Announcement) is activated when the called extension is KX-T7130, KX-T7235 or KX- T7436. *2: Whisper OHCA is activated when both calling and called extensions are using one of the KX-T7400 series PT. Programming References System Programming................................Installation Manual, Section 4 4.2.2 System - Numbering Plan Ñ (45) Call Waiting Set/Cancel Feature ReferencesCall Waiting Off-Hook Call Announcement Off-Hook Call Announcement (OHCA) (OHCA), Whisper Operation ReferencesStation Features and Operation.......................User Manual, Section 4.3 Busy Station Signaling (BSS) COS-OHCA assignment Disable EnableCall Waiting setting OFF ON 01 BSS BSS2 BSS OHCA *1®BSS3 BSS W-OHCA *2 ®OHCA®BSS Called extension Calling extension
Features GuideB Features Guide 23 Button, Direct Station Selection (DSS) DescriptionDSS button permits the PT user One-Touch access to other exten- sion users. Conditions¥ A DSS button can be assigned to a flexible CO button on a PT by Station, User or System Programming. ¥ Busy Lamp Field Once a button is assigned as a DSS button, it provides Busy Lamp Field (BLF) status. Programming References System Programming................................Installation Manual, Section 4 4.4.2 Line - Extension Line Ñ Flexible CO Key Assignment 4.4.3 Line - DSS Console Ñ Flexible DSS Key Assignment User Programming...............................................User Manual, Section 3 [005] Flexible CO Button Assignment Station Programming...........................................User Manual, Section 2 Flexible Button Assignment Ð Direct Station Selection (DSS) Button Feature ReferencesBusy Lamp Field DSS Console One-Touch Transfer Operation ReferencesBasic Operations................................................User Manual, Section 4.2 Making Calls Station Features and Operation.......................User Manual, Section 4.3 Call Transfer Ð to Station DSS Console Features..........................................User Manual, Section 5 DSS (Direct Station Selection) Buttons
B Features Guide 24 Features Guide Button, Flexible DescriptionThe use of Flexible Buttons on PT is determined by Station, User or System Programming. The following three types of Flexible Buttons are provided on PT and/or DSS Consoles: ¥ Flexible CO buttons(provided on all PTs) ¥ Flexible DSS buttons(provided on DSS Consoles) ¥ Flexible PF (Programmable Feature) buttons Assignable featur es by Flexible Button type Ò4Ó indicates that the feature is available. * Available for monitoring the call activity only. Single-CO Group-CO Loop-CO DSS(Direct Station Selection) Phantom PDN (Primary Directory Number) SDN (Secondary Directory Number) ONE-TOUCH (One-Touch Dialing) MESSAGE (Message Waiting) FWD/DND (Call Forwarding/Do Not Disturb) SAVE (Saved Number Redial) ACCOUNT (Account Code Entry) CONF (Conference) VTR (Voice Mail Transfer) Log-In / Log-Out 2WAY-REC (Two-Way Record) 2WAY-TRAN (Two-Way Transfer) LCS (Live Call Screening) LCS (Live Call Screening) Cancel DAY/NIGHT (Day/Night Switch) Alarm Answer Release Tone Through4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 44* 4* 4 4 4 4 4 4 4 4 4 4 4 4 4 4 44 4 4 4 4 4 4 CO (PT)DSS (DSS)PF (PT/DSS) Features to be assignedButton : Available when the Digital Super Hybrid System is connected to a Digital Proprietary Telephone capable Panasonic Voice Processing System (one that supports Digital Proprietary Telephone integration; e.g. KX-TVS100).
Features GuideB Features Guide 25 Conditions¥Station Programming mode A PT in Station Programming mode is treated as a busy extension. CO buttons and DSS buttons on a PT in Station Programming mode do not show the indication of call activity. ¥Flexible CO buttons Flexible CO buttons are provided on all types of PTs. Programming References System Programming................................Installation Manual, Section 4 4.4.2 Line - Extension Line Ñ Flexible CO Key Assignment Ñ Flexible PF Key Assignment 4.4.3 Line - DSS Console Ñ Flexible DSS Key Assignment Ñ Flexible PF Key Assignment User Programming..............................................User Manual, Section 3 [005] Flexible CO Button Assignment Station Programming..........................................User Manual, Section 2 Flexible Button Assignment Feature ReferencesButtons on Proprietary Telephones DSS Console Operation ReferencesNot applicable.
BFeatures Guide 26 Features Guide BUTTON, LINE ACCESS Ñ SUMMARY DescriptionUsed to get a line for making/answering a call. Line Access Buttons are provided on PTs only. They are categorized as follows: All PTs in the system can be categorized as or . (default) ICM button + CO buttons All PTs in the system have one ICM button and one L-CO button by default. DN button(s) + CO buttons If at least one PDN is assigned, all intercom calls come on a PDN button instead of ICM button. Conditions¥ DN buttons and CO buttons can be assigned to a PT by Station, User or System Programming. Programming References System Programming................................Installation Manual, Section 4 4.4.2 Line - Extension Line ÑFlexible CO Key Assignment User Programming...............................................User Manual, Section 3 [005] Flexible CO Button Assignment Station Programming...........................................User Manual, Section 2 Flexible Button Assignment Feature ReferencesButton, Group-CO (G-CO) Button, INTERCOM (ICM) Button, Loop-CO (L-CO) Button, Primary Directory Number (PDN) Button, Secondary Directory Number (SDN)Button, Single-CO (S-CO) Operation ReferencesNot applicable. ICM (INTERCOM)Used to make or receive intercom calls and to access various system features. Used to make or receive both intercom and outside calls (CO, TIE) and to access various system features. Used to make or receive outside calls (CO, TIE). DN COPDN SDN S-CO G-CO L-CO
Features GuideB Features Guide 27 Button, Line Access Ñ Group-CO (G-CO) DescriptionTo support efficient utilization of CO lines, a group of CO lines (Trunk Group) can be assigned to a flexible CO button as Group- CO (G-CO). Any incoming call from CO lines in the Trunk Group arrives at the G-CO button. To make an outside call, the extension user can get an idle CO line in the trunk group simply by pressing the assigned G-CO button. Assignable for both ICM type and DN type PTs. LED Indicator Patterns Ð G-CO Conditions¥G-CO Button Assignment A G-CO button can be assigned to a flexible CO button on a PT or a flexible DSS button on a DSS Console by Station, User or System Programming. However, a G-CO button assigned to a DSS button of a DSS console is available for monitoring the call activity only, not available for making or receiving a call. ¥ It is possible to assign the same Trunk Group to more than one differ- ent G-CO button on the same PT. ¥ It is possible to assign the same CO line to an S-CO button and to a G- CO button. ¥ It is possible to assign the Single-CO, Group-CO and Loop-CO buttons on one PT. Incoming and outgoing calls on the line are shown on the button in the following priority. Single-CO > Group-CO > Loop-CO ¥Ringing Tone Selection (DPT only) A ringing tone type for G-CO buttons can be selected either by Station or System Programming. Indicator Off Green On Green slow flash Green moderate flash Green rapid flash Red On Red slow flash Red moderate flash Red rapid flashLine status Idle You are using the line. You have a held call. You have one of the following: (1) Exclusive hold (2) CO-to-CO line call (3) Conference, unattended Hold Recall/an outside call is coming in on a single extension. Other in use an outside call is coming in on multiple extensions simultaneously.
BFeatures Guide 28 Features Guide Programming References System Programming................................Installation Manual, Section 4 4.2.3 System - Class of Service Ñ Trunk Group Setting 4.3.1 Group - Trunk Group 4.4.2 Line - Extension Line Ñ Flexible CO Key Assignment 4.4.3 Line - DSS Console Ñ Flexible DSS Key Assignment User Programming...............................................User Manual, Section 3 [005] Flexible CO Button Assignment Station Programming...........................................User Manual, Section 2 Flexible Button Assignment Ð Group-CO (G-CO) Button Ringing Tone Selection Feature ReferencesAnswering, Direct Trunk LED Indication Ringing Tone Selection Trunk Access, Direct Trunk Access, Trunk Group Operation ReferencesBasic Operations................................................User Manual, Section 4.2 Making Calls Receiving Calls Station Features and Operation.......................User Manual, Section 4.3 Answering, Direct Trunk Outward Dialing Ð Trunk Access, Trunk Group
Features GuideB Features Guide 29 Button, Line Access Ñ INTERCOM (ICM) DescriptionUsed to make or receive intercom calls, and to set or cancel vari- ous features. Available for an ICM type PT only. ConditionsNone Programming References None Feature ReferencesInter Office Calling LED Indication Operation ReferencesBasic Operations................................................User Manual, Section 4.2 Making Calls Receiving Calls Indicator Off Green On Green slow flash Green moderate flash Green rapid flashLine status Idle Intercom call/Conference established Intercom call hold On exclusive hold/Consultation hold an intercom call or a doorphone call is coming in. LED Indicator Patterns Ð INTERCOM
BFeatures Guide 30 Features Guide Button, Line Access Ñ Loop-CO (L-CO) DescriptionAll CO lines in the system or in a tenant (if ÒTenant ServiceÓ is utilized) can be assigned to a flexible CO button on a PT as a Loop-CO (L-CO) button. An incoming CO call on any CO line arrives at the L-CO, unless there are S-CO or G-CO buttons asso- ciated with the line or unless the L-CO button is already in use. The PT user can get an idle CO line simply by pressing the dedi- cated L-CO button. Available for both ICM type and DN type PTs. LED Indicator Patterns Ð L-CO Conditions¥L-CO Button Assignment An L-CO button can be assigned to a flexible CO button by Station, User or System Programming. By default, there is one L-CO button on each PT. ¥ It is possible to assign the Single-CO, Group-CO and Loop-CO buttons on one PT. Incoming and outgoing calls on the line are shown on the button in the following priority. Single-CO > Group-CO > Loop-CO ¥Local Access/ARS Pressing the L-CO button provides the same operation as dialing the feature number for ÒLocal Access/ARSÓ (default = 9). This results in Idle Trunk Dial Access or Automatic Route Selection (ARS), depend- ing on the System Programming. Indicator Off Green On Green slow flash Green moderate flash Green rapid flash Red On Red slow flash Red moderate flash Red rapid flashLine status Idle You are using the line. You have a held call. You have one of the following: (1) Exclusive hold (2) CO-to-CO line call (3) Conference, unattended Hold Recall/an outside call is coming in on a single extension. an outside call is coming in on multiple extensions simultaneously.
Features GuideB Features Guide 31 ¥Ringing Tone Selection (DPT only) A ringing tone type for L-CO buttons can be selected either by Station or System Programming. Programming References System Programming................................Installation Manual, Section 4 4.2.3 System - Class of Service Ñ Trunk Group Setting 4.2.5 System - Local Hunt Sequence 4.4.2 Line - Extension Line Ñ Flexible CO Key Assignment User Programming...............................................User Manual, Section 3 [005] Flexible CO Button Assignment Station Programming...........................................User Manual, Section 2 Flexible Button Assignment Ð Loop-CO (L-CO) Button Ringing Tone Selection Feature ReferencesAnswering, Direct Trunk Automatic Route Selection (ARS) LED Indication Ringing Tone Selection Trunk Access, Direct Trunk Access, Idle Operation ReferencesBasic Operations................................................User Manual, Section 4.2 Making Calls Receiving Calls Station Features and Operation.......................User Manual, Section 4.3 Outward Dialing Ð Trunk Access, Idle