Lucent Technologies DEFINITY Enterprise Communication Server Release 8.2 Installation For Adjuncts And Peripherals Manual

							DEFINITY LAN Gateway System 
99 Installing  DEFINITY LAN Gateway in a Single-Carrier Cabinet 
7
DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
7
DEFINITY LAN Gateway System
The DEFINITY LAN Gateway lets DEFINITY exc hang e messag es with LAN 
c ommunic ations software. The DEFINITY LAN Gateway system is used  in display 
set mod e only, not in c ontrol link. Use it with the R8r, R8si, or R8c si. Refer to the 
DEFINITY Communic ations System Generic  3 Installation, Ad ministration and  
Maintenanc e of CallVisor ASAI over the DEFINITY LAN Gateway for c omplete 
installation p roc ed ures.
Use the add subscribers
 command during administration, to prevent a no port 
available 
error. When ad ministration is c omp lete, enter reset system reboot
 to 
c lear all alarms.
Installing  DEFINITY LAN Gateway in
a Single-Carrier Cabinet 
The DEFINITY LAN Gateway system installs in five ad jac ent slots, p referab ly the 
five rig htmost slots in a Sing le-Carrier Cab inet. See Fi g u re  2 5
. 
!CAUTION:
Do not p ower up  the DEFINITY LAN Gateway System until instruc ted  to d o 
so. Refer to the DEFINITY Communic ations System Generic  3 Installation, 
Ad ministration and  Maintenanc e of CallVisor ASAI over the DEFINITY LAN 
Gateway.
It is not nec essary to p ower d own a system b efore installing  a DEFINITY LAN 
Gateway. 
						

							DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
DEFINITY LAN Gateway System 
100 Installing  DEFINITY LAN Gateway in a Single-Carrier Cabinet 
7
!CAUTION:
When the assembly is inserted , it will automatic ally p ower up  (inc lud ing  the 
d isk), run d iag nostic s, and  b oot. Therefore, to avoid a d isk c rash, never 
remove the assemb ly and  never p ower d own the DEFINITY System without 
first shutting  down the unit and  allowing  the d isk to c omp letely sp in d own.
NOTE:
The system treats a DEFINITY LAN Gateway like a d ig ital line c irc uit p ac k 
c onnec ting  8 or 17 p orts. These emulated  stations (serving  as ports) are 
assig ned  as memb ers of a hunt g roup  that reside in a c overag e p ath. This 
c overag e p ath is used  by every station that c overs an LAN Gateway 
system.
Figure 25. Typical DEFINITY LAN Gateway Installation1. System c abinet
2. Five adjacent slots in c abinet
3. Multi-func tion c irc uit p ac k4. Alarm c irc uit pac k
5. DEFINITY LAN g ateway
evdxgate RPY 090397
1
2
3
4
5 
						

							DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
DEFINITY LAN Gateway System 
101 Installing DEFINITY LAN Gateway in a Multicarrier Cabinet 
7
Installing DEFINITY LAN Gateway in
a Multicarrier Cabinet 
It is not nec essary to p ower d own a system b efore installing  a DEFINITY LAN 
Gateway
!CAUTION:
Never loc ate a DEFINITY LAN Gateway in p ort c arrier C of a multic arrier 
c ab inet. Never loc ate a DEFINITY LAN Gateway either in p ort slots 01 to 03 
of an exp ansion c ontrol c ab inet or in slots 01 to 04 of a p ort c ab inet.
!CAUTION:
When the DEFINITY LAN Gateway assemb ly is inserted , it will automatic ally 
p ower up  (inc lud ing  the d isk), run d iag nostic s, and b oot. Therefore, to 
avoid a d isk c rash, never remove the assemb ly and  never p ower d own the 
DEFINITY System without first shutting  d own the unit and  allowing  the d isk 
to c omp letely sp in d own.
1. If nec essary, to p rovid e five ad jac ent p ort slots in a d esirab le loc ation, 
reloc ate and  retranslate p ort c irc uit p ac ks. See Fi g u re  2 6
.
The system treats a DEFINITY LAN Gateway like a TN754B/C Dig ital Line 
c irc uit pac k c onnec ting  8 or 17 p orts. These emulated  stations (serving  as 
p orts) are assigned  as memb ers of a hunt g roup  that resid e in a c overag e 
p ath. This c overag e p ath is used  b y every station that c overs an LAN 
Gateway system.
!CAUTION:
Do not p ower up  the DEFINITY LAN Gateway System until the 
installation and cabling is completed. 
						

							DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
DEFINITY LAN Gateway System 
102 Installing DEFINITY LAN Gateway in a Multicarrier Cabinet 
7
Figure 26. Typical DEFINITY LAN Gateway Installation1. System c abinet
2. Five ad jac ent slots in c arrier
3. Multi-func tion c irc uit p ac k4. Alarm c irc uit p ac k
5. DEFINITY LAN g ateway
cydfadr3 RPY 090397 
						

							DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
DEFINITY LAN Gateway System 
103 Connecting the Alarm Origination Cable 
7
Connecting the Alarm Origination 
Cable
The alarm c ab le c onnec ts to the MDF and  c ross-c onnec ts to the c ustomer-
sup p lied  alarm eq uip ment. See Fi g u re  2 7
 and Tab le 16.
Figure 27. Connecting the Alarm Origination Cable
1. Connec t the alarm Y-c ab le to the first c onnec tor assoc iated  with the alarm 
c irc uit p ac k on the LAN gateway system on the rear of the system c abinet.
2. Attac h the male Amp henol c onnec tor on a B25A c ab le to the female 
Amp henol c onnec tor labeled ALARM
 on the alarm Y-c ab le.
3. Connec t the op p osite end  of the B25A c able to the MDF.
NOTE:
Do not c onnec t the RS-232 c onnec tor on the alarm Y-c ab le. The 
standard alarm origination circuit uses an on-board modem that is 
internally wired  to the c onnec tor on the alarm Y-c ab le. 1. Customer-supplied alarm equipment
2. Cross-c onnec tions to alarm eq uip ment
3. Main d istribution frame (MDF)
4. B25A 25-pair c able
5. Female ALARM
 Connec tor on alarm Y-c able
6. Unused  RS-232 c onnec tor on alarm Y-c ab le7. Alarm Y-c ab le
8. System c ab inet 
9. Multi-func tion c irc uit p ac k (p art of 
LAN gateway)
10. Alarm c irc uit p ac k (p art of LAN 
gateway)
cydfalm RPY 091197 
						

							DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
DEFINITY LAN Gateway System 
104 Connecting a PC 
7
4. Perform the c ross-c onnec ts for the alarm orig ination c onnec tion as 
described on the service order. Also see Ta b l e  1 6
.
Connecting a PC
You need a PC to ad minister the DEFINITY LAN Gateway system. You must have 
a loc al administration PC and  a loc al maintenanc e PC as well. 
 There are four ways to c onnec t a loc al ad ministration terminal:
n
Direc t c onnec tion
n
Mod em c onnec tion
n
Async hronous Data Unit (ADU) 
n
One 7400A d ata mod ule and one 7400B d ata mod ule (rec ommend ed ) or 
two 7400A d ata mod ules 
Loc al maintenanc e PCs are always c onnec ted  d irec tly.
Directly Connecting a Terminal
Fi g u re  2 8 shows typ ic al c onnec tions for a loc al maintenanc e PC. 
Fi g u re  2 9
 shows typ ic al c onnec tions for a loc al ad ministration PC. 
Table 16. Alarm Origination Pinouts (ALB Y-cable)
Pin Number Definition
27 Tip (white/b lue)
1 Ring  (b lue/white)
44 Minor RTN (return) (yellow/b rown)
19 Minor (b rown/yellow)
47 Major RTN (return) (violet/orang e)
22 Major (orange/violet) 
						

							DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
DEFINITY LAN Gateway System 
105 Connecting a PC 
7
Figure 28. Typical Local Maintenance PC Connections
Figure 29. Typical Local Administration PC Connections1. Ad ministration PC
2. RS-232 c ab le
3. 117A isolator (DC powered  systems 
only)
4. Port A c onnec tor on MFB Y-c ab le
5. Port B c onnec tor on MFB Y-c ab le6. Multifunc tion Y-c ab le (MFB)
7. System c abinet
8. Alarm c irc uit p ac k (p art of LAN g ateway)
9. Multifunc tion c irc uit p ac k (p art of LAN 
gateway)
1. Ad ministration PC
2. RS-232 c ab le
3. 117A Isolator (DC-p owered  systems only)
4. Port B c onnec tor on MFB Y-c ab le
5. Unused  RS-232 c onnec tor on MFB Y-c ab le6. 25-p air c onnec tor on multi-func tion 
Y- c a b le  ( M FB )
7. System c ab inet
8. Alarm c irc uit p ac k (p art of LAN 
gateway)
9. Multifunc tion c irc uit p ac k (p art of 
LAN gateway)
cydf001 KLC 030100
1
24
5
7
8
9
3
6
cydf001 KLC 030100
1
24
5
7
8
9
3
6 
						

							DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
DEFINITY LAN Gateway System 
106 Connecting a PC 
7
Testing a direct connection
1. Plug  the p ower c ord  on the terminal into a wall outlet.
2. Power on the terminal.
3. If you are installing  a p rinter, set the p rinter op tions as d esc ribed  in the 
p rinter manual. Then set the c orresp ond ing  op tions on the terminal to 
matc h. 
If the terminal is installed  c orrec tly and  if the DEFINITY LAN Gateway is in 
the ADX
, OAM
, OS
 or AINIT
 state, the sc reen d isp lays the login 
prompt.
4. If you are not installing  a p rinter, set the terminal op tions ac c ording  to the 
instruc tions in the terminal doc umentation.
If the terminal is installed  c orrec tly and  if the DEFINITY LAN Gateway is in 
the ADX
, OAM
, OS
 or AINIT
 state, the sc reen d isp lays the login 
prompt.
5. If the terminal d oes not d isp lay the login 
p romp t, write d own the state 
d isp layed , then see the troub leshooting  proc edures for terminal 
c onnec tions in CallVisor ASAI/DEFINITY LAN Gateway d oc umentation.
Connecting an administration PC via modems
Connec t as shown in Fi g u re  3 0.
Figure 30. Typical Administration Terminal Connections via Modems1. Printer (op tional)
2. Administration PC
3. RS-232 cable
4. Modem
5. 103A or modular wall jack
6. Main d istrib ution frame (MDF)
7. Pub lic  switc hed  telep hone network
8. 117A Isolator (DC-p owered Port-A c onnec tor 
on MFB Y-c ab le systems only)9. Port B c onnec tor on MFB Y-c ab le
10. Port A c onnec tor on MFB Y-c ab le
11. Multifunc tion Y-c ab le (MFB)
12. System c abinet
13. Alarm c irc uit p ac k (p art of LAN 
gateway)
14. Multifunc tion c irc uit pac k (p art of 
LAN g ateway)
cydfxta1 KLC 022900
15
1
2
3
3
4
4
5
5
66
7
8
9
10
11
12
13
14 
						

							DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
DEFINITY LAN Gateway System 
107 Connecting a PC 
7
1. Attac h the c onnec tor on one end  of a mod ular c ord  to the mod em. Attac h 
the other c onnec tor to the mod ular wall jac k (information outlet).
2. Connec t the sec ond mod em to the wall jac k at the remote terminal site.
3. If you are installing  a p rinter, c onnec t the p rinter to the terminal, and  set 
the p rinter op tions as d esc rib ed  in the p rinter manual. Then set the 
c orresp ond ing op tions on the terminal to matc h. 
4. If you are not installing  a p rinter, set the terminal op tions ac c ording  to the 
instruc tions in the terminal doc umentation.
5. At the terminal, enter AT
.
6. If the mod em is installed  c orrec tly, it resp ond s with OK 
(on the terminal 
sc reen).
7. Enter AT D T
 and the telephone number of the modem connected to Port B
 
(listed on the Installing  the Terminals worksheet).
If the terminal is installed  c orrec tly and  if the DEFINITY LAN Gateway is in 
the ADX
, OAM
, OS
 or AINIT
 state, the sc reen d isp lays the login 
prompt.
8. If the terminal d oes not d isp lay the login 
p romp t, write d own the state 
d isp layed , then see the troub leshooting  proc edures for terminal 
c onnec tions in CallVisor ASAI/DEFINITY LAN Gateway d oc umentation.
Connecting an administration PC via 
Asynchronous Data Units
Connec t as shown in Fi g u re  3 1. 
						

							DEFINITY ECS Release 8.2
Installation for Adjuncts and Peripherals  555-233-116  Issue 1
April 2000
DEFINITY LAN Gateway System 
108 Connecting a PC 
7
Figure 31. Typical Administration PC Connections through ADUs 
If the terminal is installed  c orrec tly and  if the DEFINITY LAN Gateway is in 
the ADX
, OAM
, OS
 or AINIT
 state, the sc reen d isp lays the login 
prompt.
9. If the terminal d oes not d isp lay the login 
p romp t, write d own the state 
d isp layed , then see the troub leshooting  proc edures for terminal 
c onnec tions in CallVisor ASAI/DEFINITY LAN Gateway d oc umentation.
Connect the Administration PC via Data Modules
Two d ata mod ules c an be used in this c onfig uration. The DEFINITY LAN g ateway 
sid e of the c onfig uration requires the 7400A. A sec ond  7400A c an b e used  and  
is c onnec ted  the same as a 7400B. Set the options as d esc rib ed  in Chap ter 4, 
‘‘Data Mod ules and  Async hronous Data Units’’.
1. Make sure the EIA c onnec tor b oard  (loc ated  insid e the d ata mod ule) is set 
to DCE (fac tory d efault). If not, unplug  the c ard  and  turn it around  to the 
DCE setting  (see “ Mod e Selec tion”  on p ag e 5-84 for d etails).
2. Connec t as shown in Fi g u re  3 2
.
3. If you are installing  a p rinter, set the p rinter op tions as d esc ribed  in the 
p rinter manual. Then set the c orresp ond ing  op tions on the terminal to 
matc h.  1. Administration PC
2. 25-Pin EIA-232-D c onnec tor on Z3A1 
ADU
3. D8AM c rossover c ord
4. 103A or modular wall jac k
5. Main d istrib ution frame (MDF) 
6. D8W c ord
7. Power supply
8. D7AP cord9. 400B2 adap ter
10. Z3A2 ADU
11. Port A c onnec tor on MFB Y-c ab le
12. Port B c onnec tor on MFB-Y-c ab le
13. Multifunction Y-c able (MFB)
14. System c ab inet
15. Multifunc tion c irc uit p ac k (p art of LAN 
gateway)
cydftadu RPY 091197
1
23
445
6
7
8
9
11
12
13
15
14
10