Konica Minolta Di2011 User Manual

							33.6 Reducing Electricity Usage
3-22 Di1611/Di2011
Basic Operations
Chapter 3
3.6 Reducing Electricity Usage
The Sleep and Auto Power-off modes are extremely useful for conserving energy.
The procedure for specifying the Energy Save mode and Auto Shut off is described 
below.
1Press the [Utility] key.
The “MACHINE SETTING” menu 
appears.
2From the 10-Key Pad, press the [2] 
key.
The “ENERGY SAVE MODE” function 
appears.
3Using the 10-Key Pad, specify the 
length of time the machine is idle 
before it enters Energy Save mode, 
and then press the [Yes] key.
❍The timer can be set between 
1 min and 240 min.
❍If you wish to correct the setting, press the [No] key, and then enter the new 
number.
4From the 10-Key Pad, press the [3] 
key.
The “AUTO SHUT OFF” function 
appears.
5Using the 10-Key Pad, specify the 
length of time the machine is idle 
before it turns off, and then press the 
[Yes] key.
❍The timer can be set between 
15 min and 240 min.
❍If you wish to correct the setting, press the [No] key, and then enter the new 
number.
Downloaded From ManualsPrinter.com Manuals 
						

							3.6 Reducing Electricity Usage3
Di1611/Di2011 3-23
Basic Operations
Chapter 3
✎
Note
If the “AUTO SHUT OFF” function 
in the “ADMIN.MANAGEMENT” 
menu is set to “ENABLE”, the 
screen shown at the right appears.
Press the and keys to 
select “ON”, and then press the 
[Yes] key.
6Press the [No] key.
The main screen appears.
Downloaded From ManualsPrinter.com Manuals 
						

							33.6 Reducing Electricity Usage
3-24 Di1611/Di2011
Basic Operations
Chapter 3
Downloaded From ManualsPrinter.com Manuals 
						

							Useful Operations
Chapter 4
4
4Useful
Operations
Downloaded From ManualsPrinter.com Manuals 
						

							44.1 Specifying a Zoom setting
4-2 Di1611/Di2011
Useful Operations
Chapter 4
4.1 Specifying a Zoom setting
To enlarge/reduce a standard-sized document to a different standard size
As an example, the following procedure describes how to enlarge a B5-size 
document to an A4-size document.
1Position the document(s) to be copied.
❍Refer to “Loading the Document” on page 3-9.
2Press the [Zoom] key.
“B5 → A4” appears in the display.
✎
Note
With each press of the [Zoom] key, 
the preset zoom ratio that is 
displayed changes one setting at a 
time.
3Check the setting for the size of paper 
to be printed on.
❍If “AUTO” is displayed, check that 
A4-sized paper is loaded into the 
paper tray.
❍If “AUTO” is not displayed, press 
the [Paper] key until “AUTO” is displayed.
❍For details on changing the paper size setting for the paper tray, refer to 
“Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu)” on 
page 7-16.
Downloaded From ManualsPrinter.com Manuals 
						

							4.1 Specifying a Zoom setting4
Di1611/Di2011 4-3
Useful Operations
Chapter 4
4If necessary, specify any other copy settings.
❍Before Making Copies (p. 5-1)
❍Advanced Copy Operations (p. 6-1)
5Press the [Start] key.
✎
Note
When making copies using the Manual Bypass, continue loading paper into 
the tray.
Downloaded From ManualsPrinter.com Manuals 
						

							44.2 Using the “Auto/Photo” Function
4-4 Di1611/Di2011
Useful Operations
Chapter 4
4.2 Using the “Auto/Photo” Function
To make sharp copies of illustrations or photos
Select the appropriate setting (“TEXT”, “PHOTO”, or “TEXT/P”) for the quality of the 
document to be copied in order to make sharp copies of the document.
1Position the document(s) to be copied.
❍Refer to “Loading the Document” on page 3-9.
2Press the [Auto/Photo] key.
❍Select either “PHOTO” or “TEXT/
P”.
3Press the or key to adjust 
the density.
❍Select the appropriate density for 
the color and density of the text 
and paper of the document.
Downloaded From ManualsPrinter.com Manuals 
						

							4.2 Using the “Auto/Photo” Function4
Di1611/Di2011 4-5
Useful Operations
Chapter 4
4Check the setting for the size of paper 
to be printed on.
❍To select either “AUTO” or a 
specific paper source, continue 
pressing the [Paper] key until the 
desired paper size is displayed.
5If necessary, specify any other copy settings.
❍Before Making Copies (p. 5-1)
❍Advanced Copy Operations (p. 6-1)
6Press the [Start] key.
✎
Note
When making copies using the Manual Bypass, continue loading paper into 
the tray.
Downloaded From ManualsPrinter.com Manuals 
						

							44.3 Copying Onto Various Types of Media
4-6 Di1611/Di2011
Useful Operations
Chapter 4
4.3 Copying Onto Various Types of Media
To copy onto OHP transparencies
As an example, the following procedure describes how to make copies onto OHP 
transparencies loaded into the 1st Tray.
1Position the A4-sized document.
❍Refer to “Loading the Document” on page 3-9.
2Adjust the paper guides in the 1st 
Tray, and load the OHP 
transparencies.
❍Load OHP transparencies in the 
same orientation as the document.
✎
Note
A maximum of 20 OHP 
transparencies can be loaded.
3Press the [Utility] key twice.
The “PAPE SOURCE SETUP” menu 
appears.
Downloaded From ManualsPrinter.com Manuals 
						

							4.3 Copying Onto Various Types of Media4
Di1611/Di2011 4-7
Useful Operations
Chapter 4
4From the 10-Key Pad, press the [2] 
key.
“TRAY1 PAPER” appears.
5Press the or key to select 
“OHP”, and then press the [Yes] key.
6Press the or key to select 
“AUTO”, and then press the [Yes] key.
7Press the [No] key.
The main screen appears.
8Press the [Paper] key to select the 
paper loaded into the 1st Tray.
9If necessary, specify any other copy settings.
❍Before Making Copies (p. 5-1)
❍Advanced Copy Operations (p. 6-1)
10Press the [Start] key.
Downloaded From ManualsPrinter.com Manuals