Konica Minolta Di2011 User Manual

							11.1 Introduction
1-2 Di1611/Di2011
Introduction
Chapter 1
1.1 Introduction
We Want You to Be a Satisfied Customer
Thank you for choosing this machine.
This User Manual describes the functions, operating procedures, precautions, and 
basic troubleshooting for this machine. Before using the machine, be sure to read 
the User Manual thoroughly in order to ensure that you use it efficiently. After you 
have gone through the manual, store it in the holder on the machine and keep it 
handy at all times.
Note that some of the illustrations of the machine used in the User Manual may be 
different from what you actually see on your machine.
Downloaded From ManualsPrinter.com Manuals 
						

							1.2 Explanation of Manual Conventions1
Di1611/Di2011 1-3
Introduction
Chapter 1
1.2 Explanation of Manual Conventions
The marks and text formats used in this manual are described below.
WARNING
Failure to observe instructions highlighted in this manner may result in fatal 
or critical injuries.
➜Observe all warnings in order to ensure safe use of the copier.
CAUTION
Failure to observe instructions highlighted in this manner may result in 
serious injuries or property damage.
➜Observe all cautions in order to ensure safe use of the copier.
✎
Note*
(*May also appear as “Important” or “Tip”)
Text highlighted in this manner contains useful information and tips to ensure 
safe use of the machine.
1The number 1 as formatted here indicates the 
first step of a sequence of actions. 
2Subsequent numbers as formatted here 
indicate subsequent steps of a sequence of 
actions.
?Text formatted in this style provides 
additional assistance. 
➜Text formatted in this style describes the 
action that will ensure the desired results are achieved. 
[Copy] key
The names of keys on the control panel are written as shown above.
An illustration inserted here shows
what operations must be performed.
Downloaded From ManualsPrinter.com Manuals 
						

							11.3 Explanation of Basic Concepts and Symbols
1-4 Di1611/Di2011
Introduction
Chapter 1
1.3 Explanation of Basic Concepts and Symbols
The use of words and symbols in this manual are explained below.
Paper Feeding
During printing, paper is supplied from the right side of the machine and fed into the 
output tray on top or the output option at the left with the printed surface of the page 
facing down. The paper feed direction is shown by the arrows in the diagram below.
Downloaded From ManualsPrinter.com Manuals 
						

							1.3 Explanation of Basic Concepts and Symbols1
Di1611/Di2011 1-5
Introduction
Chapter 1
“Width” and “Length”
Whenever paper dimensions are 
mentioned in this manual, the first value 
always refers to the width of the paper 
(shown as “X” in the illustration) and the 
second to the length (shown as “Y”).
Paper Orientation
Lengthwise ( )
If the width (X) of the paper is shorter than 
the length (Y), the paper has a vertical or 
portrait orientation, indicated by either “L” 
or .
Crosswise ( )
If the width (X) of the paper is longer than 
the length (Y), the paper has a horizontal 
or landscape orientation, indicated by 
either “C” or .
Downloaded From ManualsPrinter.com Manuals 
						

							11.4 Energy Star®
1-6 Di1611/Di2011
Introduction
Chapter 1
1.4 Energy Star®
As an ENERGY STAR® Partner, we have determined that this machine meets the 
ENERGY STAR® Guidelines for energy efficiency.
As an ENERGY STAR
® Partner, we have determined that this machine meets the 
ENERGY STAR® Guidelines for energy efficiency.
What is an ENERGY STAR
® Product?
An ENERGY STAR
® product has a special feature that allows it to automatically 
switch to a “low-power mode” after a period of inactivity. An ENERGY STAR® 
product uses energy more efficiently, saves you money on utility bills and helps 
protect the environment.
Downloaded From ManualsPrinter.com Manuals 
						

							1.5 Safety Information1
Di1611/Di2011 1-7
Introduction
Chapter 1
1.5 Safety Information
This section contains detailed instructions on the operation and maintenance of this 
machine. To achieve optimum utility of this device, all operators should carefully 
read and follow the instructions in this manual. Please keep this manual in a handy 
place near the machine.
* Ver06
Please note that some parts of the contents of this section may not correspond with the purchased 
product.
Warning and Precaution Symbols
Meaning of Symbols
Please read the next section before using this device. It contains important information related to user 
safety and preventing equipment problems.
Make sure you observe all of the precautions listed in this manual.
Ignoring this warning could cause serious injury or even death.
Ignoring this caution could cause injury or damage to property.
A triangle indicates a danger against which you should take precaution.
This symbol warns against cause burns.
A diagonal line indicates a prohibited course of action.
This symbol warns against dismantling the device.
A black circle indicates an imperative course of action.
This symbol indicates you must unplug the device.
WARNING:
CAUTION:
Downloaded From ManualsPrinter.com Manuals 
						

							11.5 Safety Information
1-8 Di1611/Di2011
Introduction
Chapter 1
WARNING
Do not modify this product, as a fire, electrical shock, or breakdown could result. If the 
product employs a laser, the laser beam source could cause blindness.
Do not attempt to remove the covers and panels which have been fixed to the product. 
Some products have a high-voltage part or a laser beam source inside that could 
cause an electrical shock or blindness.
Use only the power cord supplied in the package. If a power cord is not supplied, only 
use the power cord and plug that is specified in POWER CORD INSTRUCTION. 
Failure to use this cord could result in a fire or electrical shock.
Use the power cord supplied in the package only for this machine and NEVER use it 
for any other product. Failure to observe this precaution could result in a fire or 
electrical shock.
Use only the specified power source voltage. Failure to do that could result in a fire 
or electrical shock.
Do not use a multiple outlet adapter to connect any other appliances or machines. 
Use of a power outlet for more than the marked current value could result in a fire or 
electrical shock.
Do not unplug and plug in the power cord with a wet hand, as an electrical shock could 
result.
Plug the power cord all the way into the power outlet. Failure to do this could result in a 
fire or electrical shock.
Do not scratch, abrade, place a heavy object on, heat, twist, bend, pull on, or damage 
the power cord. Use of a damaged power cord (exposed core wire, broken wire, etc.) 
could result in a fire or breakdown.
Should any of these conditions be found, immediately turn OFF the power switch, 
unplug the power cord from the power outlet, and then call your authorized service 
representative.
Do not use an extension cord, in principle. Use of an extension cord could cause a 
fire or electrical shock. Contact your authorized service representative if an extension 
cord is required.
Do not place a flower vase or other container that contains water, or metal clips or other 
small metallic objects on this product. Spilled water or metallic objects dropped inside 
the product could result in a fire, electrical shock, or breakdown.
Should a piece of metal, water, or any other similar foreign matter get inside the product, 
immediately turn OFF the power switch, unplug the power cord from the power outlet, 
and then call your authorized service representative.
Do not keep using this product, if this product becomes inordinately hot or emits 
smoke, or unusual odor or noise. Immediately turn OFF the power switch, unplug the 
power cord from the power outlet, and then call your authorized service 
representative. If you keep on using it as is, a fire or electrical shock could result.
Do not keep using this product, if this product has been dropped or its cover 
damaged. Immediately turn OFF the power switch, unplug the power cord from the 
power outlet, and then call your authorized service representative. If you keep on 
using it as is, a fire or electrical shock could result.
Do not throw the toner cartridge or toner into an open flame. The hot toner may scatter 
and cause burns or other damage.
Connect the power cord to an electrical outlet that is equipped with a grounding terminal.
Downloaded From ManualsPrinter.com Manuals 
						

							1.5 Safety Information1
Di1611/Di2011 1-9
Introduction
Chapter 1
CAUTION
Do not use flammable sprays, liquids, or gases near this product, as a fire could 
result.
Do not leave a toner unit or drum unit in a place within easy reach of children. 
Licking or ingesting any of these things could injure your health.
Do not let any object plug the ventilation holes of this product. Heat could accumulate 
inside the product, resulting in a fire or malfunction.
Do not install this product at a site that is exposed to direct sunlight, or near an air 
conditioner or heating apparatus. The resultant temperature changes inside the 
product could cause a malfunction, fire, or electrical shock.
Do not place the product in a dusty place, or a site exposed to soot or steam, near a 
kitchen table, bath, or a humidifier. A fire, electrical shock, or breakdown could result.
Do not place this product on an unstable or tilted bench, or in a location subject to a 
lot of vibration and shock. It could drop or fall, causing personal injury or mechanical 
breakdown.
After installing this product, mount it on a secure base. If the unit moves or falls, it may 
cause personal injury.
Do not store toner units and PC drum units near a floppy disk or watch that are 
susceptible to magnetism. They could cause these products to malfunction.
The inside of this product has areas subject to high temperature, which may cause 
burns. When checking the inside of the unit for malfunctions such as a paper misfeed, 
do not touch the locations (around the fusing unit, etc.) which are indicated by a 
“CAUTION HOT” caution label.
Do not place any objects around the power plug as the power plug may be difficult to pull 
out when an emergency occurs.
The socket-outlet shall be installed near the machine and shall be easily accessible as 
the power plug may be difficult to pull out when an emergency occurs.
Always use this product in a well ventilated location. Operating the product in a poorly 
ventilated room for an extended period of time could injure your health. Ventilate the 
room at regular intervals.
Whenever moving this product, be sure to disconnect the power cord and other 
cables. Failure to do this could damage the cord or cable, resulting in a fire, electrical 
shock, or breakdown.
When moving this product, always hold it by the locations specified in the User 
manual or other documents. If the unit falls it may cause severe personal injury. The 
product may also be damaged or malfunction.
Remove the power plug from the outlet more than one time a year and clean the area 
between the plug terminals. Dust that accumulates between the plug terminals may 
cause a fire.
When unplugging the power cord, be sure to hold onto the plug. Pulling on the power 
cord could damage the cord, resulting in a fire or electrical shock.
Downloaded From ManualsPrinter.com Manuals 
						

							11.5 Safety Information
1-10 Di1611/Di2011
Introduction
Chapter 1
Precautions for Routine Use
USER INSTRUCTIONS
CE Marking (Declaration of Conformity)
This product complies with the following EU directives: 
89/336/EEC, 73/23/EEC and 93/68/EEC directives.
This declaration is valid for the area of the European Union.
This device must be used with shielded interface cables. The use of non-shielded 
cable is likely to result in interference with radio communications and is prohibited 
under EU directives.
Do not store toner units, PC drum units, and other supplies and consumables in a 
place subject to direct sunlight and high temperature and humidity, as poor image 
quality and malfunction could result.
Do not attempt to replace the toner unit and PC drum unit in a place exposed to direct 
sunlight. If the PC drum is exposed to intense light, poor image quality could result.
Do not unpack a toner unit or PC drum unit until the very time of use. Do not leave an 
unpacked unit standing. Install it immediately or poor image quality could result.
Do not keep toner units and PC drum units in an upright position or upside down, as 
poor image quality could result.
Do not throw or drop a toner unit or PC drum unit as poor image quality could result.
Do not use this product in an area where ammonia or other gases or chemicals are 
present. Failure to do so may shorten the service life of the product, cause damage 
or decrease performance.
Do not use this product in an environment with a temperature outside the range 
specified in the User manual, as a breakdown or malfunction could result.
Do not attempt to feed stapled paper, carbon paper or aluminum foil through this 
product, as a malfunction or fire could result.
Do not touch or scratch the surface of the toner unit developing roller and the PC drum, 
as poor image quality could result.
Use the supplies and consumables recommended by the dealer. Use of any supply or 
consumable not recommended could result in poor image quality and breakdown.
Downloaded From ManualsPrinter.com Manuals 
						

							1.5 Safety Information1
Di1611/Di2011 1-11
Introduction
Chapter 1
Laser Safety
This is a digital machine which operates using a laser. There is no possibility of 
danger from the laser provided the machine is operated according to the 
instructions in this manual.
Since radiation emitted by the laser is completely confined within protective 
housing, the laser beam cannot escape from the machine during any phase of user 
operation.
This machine is certified as a Class 1 laser product: This means the machine does 
not produce hazardous laser radiation.
Internal Laser Radiation
Maximum Average Radiation Power: 6.32 µW at the laser aperture of the print head 
unit.
Wavelength: 770-795 nm
This product employs a Class 3b laser diode that emits an invisible laser beam.
The laser diode and the scanning polygon mirror are incorporated in the print head 
unit.
The print head unit is NOT A FIELD SERVICE ITEM:
Therefore, the print head unit should not be opened under any 
circumstances.
Print Head
Laser Aperture of the 
Print Head Unit
Downloaded From ManualsPrinter.com Manuals