Konica Minolta Di2011 User Manual

							33.3 Loading the Document
3-12 Di1611/Di2011
Basic Operations
Chapter 3
5Press the [Start] key.
Downloaded From ManualsPrinter.com Manuals 
						

							3.3 Loading the Document3
Di1611/Di2011 3-13
Basic Operations
Chapter 3
To position translucent or transparent documents
When copying a highly transparent or translucent document, such as OHP 
transparencies, tracing paper or diazo photosensitive paper, position it as 
described below.
1Lift open the Original Cover, or the Document Feeder if it is installed.
2Position the document to be copied 
face down on the Original Glass.
❍Align the document on the scales 
above and to the left of the Original 
Glass.
3Place a blank sheet of paper of the 
same size over the document.
4Carefully close the Original Cover, or the Document Feeder if it is installed.
Downloaded From ManualsPrinter.com Manuals 
						

							33.3 Loading the Document
3-14 Di1611/Di2011
Basic Operations
Chapter 3
5If necessary, specify any other copy settings.
❍Before Making Copies (p. 5-1)
❍Advanced Copy Operations (p. 6-1)
6Press the [Start] key.
Downloaded From ManualsPrinter.com Manuals 
						

							3.3 Loading the Document3
Di1611/Di2011 3-15
Basic Operations
Chapter 3
To position a book
When copying two facing pages of a bound document, such as a book or magazine, 
position it as described below.
1Lift open the Original Cover, or the Document Feeder if it is installed.
2Position the book face down onto the 
Original Glass, with the top of the 
book toward the rear of the machine 
and with the center of the book 
aligned with the mark in the 
Document Scale.
?Have the necessary precautions 
been observed when positioning 
the book on the Original Glass?
➜Do not place objects weighting 
more than 3 kg on the Original 
Glass. In addition, do not press 
down extremely hard on the 
document, otherwise the machine 
may be damaged.
3Carefully close the Original Cover, or the Document Feeder if it is installed.
4Press the [Book Separation] key.
The “Book Separation” indicator lights 
up.
5If necessary, specify any other copy settings.
❍Before Making Copies (p. 5-1)
❍Advanced Copy Operations (p. 6-1)
6Press the [Start] key.
Downloaded From ManualsPrinter.com Manuals 
						

							33.3 Loading the Document
3-16 Di1611/Di2011
Basic Operations
Chapter 3
To load documents of mixed sizes
Documents containing pages of different sizes can be loaded as a set into the 
Document Feeder.
Precautions for loading documents of mixed sizes:
AF-12
Documents of different sizes can be copied only if all pages have the same width.
For example: A document consisting of A3 L- and A4 C-size pages.
AFR-19
Refer to “Mixed Width Document Sizes (AFR-19)” on page 5-28.
1Slide out the Document Guide Plates.
2Load the document pages to be 
copied face up.
?Have the necessary precautions 
been observed when loading the 
document?
➜A maximum of 50 document 
pages can be loaded.
(With AF-12)
➜A maximum of 80 document 
pages can be loaded.
(With AFR-19)
(Auto Paper)Copies Documents
Downloaded From ManualsPrinter.com Manuals 
						

							3.3 Loading the Document3
Di1611/Di2011 3-17
Basic Operations
Chapter 3
➜Do not load so many pages that the top of the stack is higher than 
the mark.
3Adjust the Document Guide Plates to 
fit the size of the document.
✎
Note
Be sure to load the document 
correctly, otherwise the pages 
may not be fed in straight.
4Press the [Original] key twice.
The “Mixed Orig.” indicator lights up.
5Press the [Auto Paper/Auto Size] key 
until the Auto Paper function is 
selected.
❍Check that “AUTO” appears in the 
bottom line of the screen.
6Press the [Start] key.
Downloaded From ManualsPrinter.com Manuals 
						

							33.4 Stopping/Restarting/Cancelling a Copy Job
3-18 Di1611/Di2011
Basic Operations
Chapter 3
3.4 Stopping/Restarting/Cancelling a Copy Job
Follow the procedure described below to stop a copy job.
1Specify the copy settings, and then press the [Start] key.
Copying begins.
2During printing, press the [Stop] key.
The message “∗PLEASE WAIT!∗” 
appears, and printing is stopped.
?How can the stopped job be 
restarted?
➜When the message “PRESS THE 
START KEY TO RESUME” 
appears, press the [Start] key.
Printing continues.
?How can the stopped job be 
cancelled?
➜When the message “PRESS THE 
START KEY TO RESUME” 
appears, press the [No] key.
The message “∗COPY CANCELED∗” appears, and the job is cancelled.



Downloaded From ManualsPrinter.com Manuals 
						

							3.5 Confirmation Mode3
Di1611/Di2011 3-19
Basic Operations
Chapter 3
3.5 Confirmation Mode
The number of operations performed since this machine was installed can be 
checked using the functions available when the [Status] key is pressed.
Items that can be checked from the machine counter menu:
machine counterDescription
TOTAL COUNT This count shows the total number of prints made since this machine was 
installed.
SIZE COUNT This count shows the total number of prints made for the specified paper size. 
(The paper size that is counted should be set by the service representative.)
TOTAL SCAN This count shows the total number of scans made since this machine was 
installed.
However, the number of pages scanned while making copies is not included. 
Downloaded From ManualsPrinter.com Manuals 
						

							33.5 Confirmation Mode
3-20 Di1611/Di2011
Basic Operations
Chapter 3
To check the counters
1Press the [Status] key, and then press 
the [Yes] key.
The machine counter menu appears.
2Using the and keys, select the 
counter that you wish to check.
Downloaded From ManualsPrinter.com Manuals 
						

							3.5 Confirmation Mode3
Di1611/Di2011 3-21
Basic Operations
Chapter 3
3Press the [Yes] key.
The “TOTAL PAGE?” appears.
4Press the [No] key.
The main screen appears.
Downloaded From ManualsPrinter.com Manuals