Konica Minolta Di2011 User Manual

							77.2 Specifying Machine Settings (“MACHINE SETTING” Menu)
7-8 Di1611/Di2011
Utility Mode – Copy Functions
Chapter 7
To set the “ENERGY SAVE MODE” (preheat mode) function
1Select the “MACHINE SETTING” 
menu.
❍Refer to “To select the “MACHINE 
SETTING” menu” on page 7-6.
2Press the [2] key from the 10-Key Pad 
to select “ENERGY SAVE MODE”.
3Using the 10-Key Pad, specify the 
length of time the machine is idle 
before it enters Energy Save mode, 
and then press the [Yes] key.
❍The timer can be set between 
1 min and 240 min.
❍If you wish to correct the setting, press the [No] key, and then enter the new 
number.
The “MACHINE SETTING” menu appears again.
Downloaded From ManualsPrinter.com Manuals 
						

							7.2 Specifying Machine Settings (“MACHINE SETTING” Menu)7
Di1611/Di2011 7-9
Utility Mode – Copy Functions
Chapter 7
To set the “AUTO SHUT OFF” function
Precautions for setting the “AUTO SHUT OFF” function:
✔Whether or not auto shut-off is possible depends on the “AUTO SHUT OFF” 
function in the “ADMIN. MANAGEMENT” menu.
1Select the “MACHINE SETTING” 
menu.
❍Refer to “To select the “MACHINE 
SETTING” menu” on page 7-6.
2Press the [3] key from the 10-Key Pad 
to select “AUTO SHUT OFF”.
❍If the “AUTO SHUT OFF” function 
in the “ADMIN. MANAGEMENT” 
menu is set to “DISABLE”, skip to 
step 4.
3Using the and keys, select 
“ON”, and then press the [Yes] key.
4Using the 10-Key Pad, specify the 
length of time until the machine 
automatically turns off, and then press 
the [Yes] key.
❍The timer can be set between 
15 min and 240 min.
❍If you wish to correct the setting, press the [No] key, and then enter the new 
number.
The “MACHINE SETTING” menu appears again.
Downloaded From ManualsPrinter.com Manuals 
						

							77.2 Specifying Machine Settings (“MACHINE SETTING” Menu)
7-10 Di1611/Di2011
Utility Mode – Copy Functions
Chapter 7
✎
Note
If the Auto Shut Off function is performed and the machine is turned off, it will 
no longer be possible to make copies or print from a computer.
To make copies or print from a computer, turn on the machine.
Downloaded From ManualsPrinter.com Manuals 
						

							7.2 Specifying Machine Settings (“MACHINE SETTING” Menu)7
Di1611/Di2011 7-11
Utility Mode – Copy Functions
Chapter 7
To specify the scanning image quality (“DENSITY(ADF)” function)
1Select the “MACHINE SETTING” 
menu.
❍Refer to “To select the “MACHINE 
SETTING” menu” on page 7-6.
2Press the [4] key from the 10-Key Pad 
to select “DENSITY(ADF)”.
✎
Note
If the Document Feeder is not 
installed, “
∗NOT AVAILABLE∗” 
appears.
3Using the and keys, select 
either “MODE1” or “MODE2”, and 
then press the [Yes] key.
The “MACHINE SETTING” menu 
appears again.
Downloaded From ManualsPrinter.com Manuals 
						

							77.2 Specifying Machine Settings (“MACHINE SETTING” Menu)
7-12 Di1611/Di2011
Utility Mode – Copy Functions
Chapter 7
To specify the scanning image quality (“DENSITY(BOOK)” function)
1Select the “MACHINE SETTING” 
menu.
❍Refer to “To select the “MACHINE 
SETTING” menu” on page 7-6.
2Press the [5] key from the 10-Key Pad 
to select “DENSITY(BOOK)”.
3Using the and keys, select 
either “MODE1” or “MODE2”, and 
then press the [Yes] key.
The “MACHINE SETTING” menu 
appears again.
Downloaded From ManualsPrinter.com Manuals 
						

							7.2 Specifying Machine Settings (“MACHINE SETTING” Menu)7
Di1611/Di2011 7-13
Utility Mode – Copy Functions
Chapter 7
To specify the printing density (“PRINT DENSITY” function)
1Select the “MACHINE SETTING” 
menu.
❍Refer to “To select the “MACHINE 
SETTING” menu” on page 7-6.
2Press the [6] key from the 10-Key Pad 
to select “PRINT DENSITY”.
3Using the and keys, select 
one of the five settings between 
“LIGHT” and “DARK”, and then press 
the [Yes] key.
The “MACHINE SETTING” menu 
appears again.
Downloaded From ManualsPrinter.com Manuals 
						

							77.2 Specifying Machine Settings (“MACHINE SETTING” Menu)
7-14 Di1611/Di2011
Utility Mode – Copy Functions
Chapter 7
To set the “LCD CONTRAST” function
1Select the “MACHINE SETTING” 
menu.
❍Refer to“To select the “MACHINE 
SETTING” menu” on page 7-6.
2Press the [7] key from the 10-Key Pad 
to select “LCD CONTRAST”.
3Using the and keys, select 
one of the four settings between 
“LIGHT” and “DARK”, and then press 
the [Yes] key.
The “MACHINE SETTING” menu 
appears again.
Downloaded From ManualsPrinter.com Manuals 
						

							7.2 Specifying Machine Settings (“MACHINE SETTING” Menu)7
Di1611/Di2011 7-15
Utility Mode – Copy Functions
Chapter 7
To set the “LANGUAGE” function
1Select the “MACHINE SETTING” 
menu.
❍Refer to “To select the “MACHINE 
SETTING” menu” on page 7-6.
2Press the [8] key from the 10-Key Pad 
to select “LANGUAGE”.
3Using the and keys, select the 
desired language, and then press the 
[Yes] key.
The “MACHINE SETTING” menu 
appears again.
Downloaded From ManualsPrinter.com Manuals 
						

							77.3 Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu)
7-16 Di1611/Di2011
Utility Mode – Copy Functions
Chapter 7
7.3 Setting Up the Paper Sources (“PAPER SOURCE 
SETUP” Menu)
From the “PAPER SOURCE SETUP” menu, the various settings for the paper trays 
can be changed.
“PAPER SOURCE SETUP” menu:
No.PAPER SOURCE SETUPDescription
1 INCH/METRIC This function can be used to set the size measurement system 
for the paper loaded in each tray. It can be used to select 
whether paper measured in centimeters (“METRIC”), such as 
A4 and B5 sizes, or paper measured in inches (“INCH”), such 
as Letter size, is loaded. If no particular setting is selected, the 
paper size is detected automatically.
The manufacturer’s default setting is “METRIC”.
2 TRAY1 PAPER This function can be used to set the type of paper (“PLAIN”, 
“OHP”, “CARD” or “ENVELOPE”) loaded into the 1st Tray, and 
the size of the paper (“AUTO” or “SIZE INPUT”). If the paper 
size is set to “SIZE INPUT”, type in the paper size.
The manufacturer’s default settings are “PLAIN” and 
“AUTO”.
3 PAPER TYPE This function can be used to specify the type of paper loaded 
into a tray, which determines whether or not the paper is 
available with the Auto Paper function or the tray is available 
with the auto tray switching feature. Select the paper type 
(“PLAIN”, “RECYCLE” or “SPECIAL”) to specify whether the 
paper is available with the Auto Paper function or the tray is 
available with the auto tray switching feature.
If special paper is loaded into the tray, “PLAIN”, “RECYCLE”, 
“SPECIAL” or “1-SIDE” must be selected.
“PLAIN”:The Auto Paper function can be selected, the auto tray 
switching feature is available, and double-sided copies can be 
made.
“RECYCLE”:The Auto Paper function cannot be selected; 
however, the auto tray switching feature is available, and 
double-sided copies can be made.
“SPECIAL”:The Auto Paper function cannot be selected, and 
the auto tray switching feature is not available; however, 
double-sided copies can be made.
“1-SIDE”:The Auto Paper function can be selected and the auto 
tray switching feature is available only when making single-
sided copies. In addition, double-sided copies can be made.
The manufacturer’s default setting is “PLAIN”.
Downloaded From ManualsPrinter.com Manuals 
						

							7.3 Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu)7
Di1611/Di2011 7-17
Utility Mode – Copy Functions
Chapter 7
To select the “PAPER SOURCE SETUP” menu
1Press the [Utility] key.
“MACHINE SETTING?” appears.
2Press the key once to select 
“PAPER SOURCE SETUP?”.
3From the 10-Key Pad, press the key for the “PAPER SOURCE SETUP” function 
that you wish to set.
❍The “PAPER SOURCE SETUP” functions are as follows:
1 INCH/METRIC
2 TRAY1 PAPER
3 PAPER TYPE
✎
Tip
If, at any time, you wish to quit setting a “PAPER SOURCE SETUP” function, 
press the [No] key. When the message “STOP SETTING?” appears, press the 
[Yes] key to quit.
Downloaded From ManualsPrinter.com Manuals