HP PhotoSmart C7283 User Manual

							
Chapter 9
120 Use the scan features
Scan
 
						

							
10 Use the copy features
The HP All-in-One enables you to produce high-quality color and black-and-white copies
on a variety of paper types, including transparencies. You can enlarge or reduce the size
of an original to fit a specific paper size, adjust the darkness of the copy, and use special
features to make high-quality copies of photos, including borderless copies.
TIP: For the best copy performance on standard copy projects, set the paper size
to  Letter  or A4, the paper type to  Plain Paper, and the copy quality to  Fast.
This section contains the following topics:
•
Make a copy
•
Preview your copy job
•
Change the copy settings for the current job
•
Change default copy settings
•
Perform special copy jobs
•
Stop copying
Make a copy
You can make quality copies from the control panel.
To make a copy from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass or print side
up in the document feeder tray.
3. Press  Start Copy Black  or Start Copy Color  to begin copying.
Related topics
“
Load an original in the automatic document feeder” on page 71
Preview your copy job
After changing settings on the HP All-in-One for making a copy, you can preview an image
of the expected output on the display before starting the copy.
NOTE: You must explicitly pick your copy settings to ensure an accurate preview.
Automatic settings will not reflect the loaded paper size and type, but use defaults
instead.
Previews appear when you select  Preview on the Copy Menu , or when you use the crop
feature to specify a specific ar ea of the original to copy.
Use the copy features 121
Copy
 
						

							
To preview your copy from the control panel
1.Press  Copy Menu .
The  Copy Menu  appears.
2. Change copy settings on the HP All-in-One to accurately reflect the copy you want to
make.
3. Press 
 to highlight  Preview, and then press  OK.
An image on the display shows how your copy will print.
4. Press  Start Copy Black  or Start Copy Color  to accept the preview and begin
copying.
Change the copy settings  for the current job
You can customize the copy settings of the HP All-in-One to handle nearly any copy task.
This section contains the following topics:
•
Set the number of copies
•
Set the copy paper size
•
Set the copy paper type
•
Change copy speed or quality
•
Adjust the lightness and darkness of your copy
Set the number of copies
You can set the number of copies that you want to print by either using the  Copy Menu
button on the control panel or by selecting the appropriate options in your software
application.
To set the number of copies from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press  Copy Menu .
The  Copy Menu  appears.
4. Press 
 to highlight  Copies, and then press  OK.
The  Copies  option appears.
5. Use the keypad or press 
 to select the number of copies, up to the maximum.
(The maximum number of co pies varies by model.)
TIP:If you hold down either of the arrow buttons, the number of copies changes
by increments of 5 to make it easier to set a large number of copies.
6. Press  Start Copy Black  or Start Copy Color .
Set the copy paper size
You can set the paper size on the HP All-in-One. The paper size you select should match
what is loaded in the input tray.
Chapter 10
122 Use the copy features
Copy
 
						

							
To set the paper size from the control panel
1.Press  Copy Menu .
The  Copy Menu  appears.
2. Press 
 to highlight  Paper Size, and then press  OK.
The  Paper Size  menu appears.
3. Press 
 to highlight the appropriate paper size and then press  OK.
Refer to the following table to determine  which paper size setting to choose, based
on the paper loaded in the input tray.
Paper typeSuggested paper size settings
Copier, multi-purpose, or plain papers8.5x11 inch  or A4
Inkjet papers8.5x11 inch  or A4
Letterhead8.5x11 inch  or A4
Photo papers10x15 cm
4x6 inch
13x18 cm
5x7 inch
8.5x11 inch
A4
L (Japan only)
2L  (Japan only)
20x25 cm  (Germany only)
Mutsugiri  (Japan only)
HagakiHagaki (Japan only)
Transparency films8.5x11 inch  or A4
Set the copy paper type
You can set the paper type on the HP All-in-One. The default paper type setting for
copying is  Automatic , which causes the HP All-in-One to detect the type of paper in the
input tray.
To set the paper type for copies
1. Press  Copy Menu .
The  Copy Menu  appears.
2. Press 
 to highlight  Paper Type, and then press  OK.
The  Paper Type  menu appears.
Change the copy settings for the current job 123
Copy
 
						

							
3.Press  until the appropriate paper type appears.
Refer to the following table to determine which paper type setting to choose based
on the paper loaded in the input tray.
Paper typeControl panel setting
Copier paper or letterheadPlain Paper
HP Bright White PaperPlain Paper
HP Premium Plus Photo Paper, GlossyPremium Photo
HP Premium Plus Photo Paper, MattePremium Photo
HP Premium Plus 10 x 15 cm (4 x 6 inch)
Photo PaperPremium Photo
HP Premium Plus 13 x 18 cm (5 x 7 inch)
Photo PaperPremium Photo
HP Photo PaperPhoto Paper
HP Everyday Photo PaperEveryday Photo
HP Everyday Photo Paper, Semi GlossEveryday Matte
HP Premium PaperPremium Inkjet
Other inkjet paperPremium Inkjet
HP Professional Brochure & Flyer Paper
(Glossy)Brochure Glossy
HP Professional Brochure & Flyer Paper
(Matte)Brochure Matte
HP Premium or Premium Plus Inkjet
Transparency FilmTransparency
Other transparency filmTransparency
Plain HagakiPlain Paper
Glossy HagakiPremium Photo
L (Japan only)Premium Photo
Advanced Photo PaperAdvanced Photo
4. Press  OK.
Change copy speed or quality
The HP All-in-One provides four options that affect copy speed and quality:
• Maximum dpi  produces the highest quality for all paper.  Maximum dpi copies slower
than the other quality settings.
• Best  produces high quality for all paper and eliminates the banding (striping) effect
that sometimes occu rs in solid areas. Best copies slower than the  Normal or Fast
quality settings.
Chapter 10
124 Use the copy features
Copy
 
						

							
•Normal  delivers high quality and is the recommended setting for most of your
copying.  Normal copies faster than  Best and is the default setting.
• Fast  copies faster than the  Normal setting. The text is comparable to the quality of
the  Normal  setting, but the graphics might be lower quality. The  Fast setting uses
less ink and extends the life  of your ink cartridges.
To change the copy quality from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press  Copy Menu .
The  Copy Menu  appears.
4. Press 
 to highlight  Quality, and then press  OK.
The  Quality  menu appears.
5. Press 
 to select a copy quality.
6. Press  OK.
Adjust the lightness and darkness of your copy
You can use the  Lighter/Darker option to adjust the contrast of the copies you make.
To adjust the copy contrast from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press  Copy Menu .
The  Copy Menu  appears.
4. Press 
 to highlight  Lighter/Darker , and then press  OK.
The  Lighter/Darker  menu appears.
5. Do one of the following:
• Press 
 to darken the copy.
• Press 
 to lighten the copy.
6. Press  OK.
Change default copy settings
When you change copy settings from the control panel, the settings apply only to the
current copy job. To apply copy settings to all future copy jobs, you can save the settings
as defaults.
To set default copy settings from the control panel
1. Make any needed changes to the copy settings.
2. Press  Copy Menu .
The  Copy Menu  appears.
3. Press 
 to highlight  Set As New Defaults , and then press OK.
4. Press 
 to highlight  Yes, change defaults , and then press OK.
Change default copy settings 125
Copy
 
						

							
NOTE:The settings you specify here are only saved on the HP All-in-One. They do
not adjust the settings in the software. You can save your most frequently used
settings by using the software that you installed with the HP All-in-One.
Perform special copy jobs
In addition to supporting standard copy jobs, the HP All-in-One can perform special jobs
such as copying borderless photos and resizing originals.
This section contains the following topics:
•
Make a borderless copy of a photo
•
Resize an original to fit onto letter or A4 paper
•
Resize an original using custom settings
•
Crop an original
•
Shift the left margin
•
Improve the quality of a copy
Make a borderless copy of a photo
For the best quality when copying a photo, load 10 x 15 cm (4 x 6 inch) photo paper in
the photo tray and change your copy settings for the correct paper type and photo
enhancement.
To make a borderless copy of a photo from the control panel
1. Load 10 x 15 cm (4 x 6 inch) photo paper into the photo tray.
2.Load your original photo print side down on the right front corner of the glass.
Position the photo on the glass so the long edge of the photo is along the front edge
of the glass, as indicated by the engraved guides along the edge of the glass.
3. Press  Start Copy Black  or Start Copy Color .
The HP All-in-One makes a 10 x 15 cm (4 x 6 inch) borderless copy of your original
photo.
NOTE: If you loaded tabbed paper in the photo tray, you can remove the tab
from the copy of your photo once the ink has completely dried.
TIP: If the output is not borderless, set the paper type to  Premium Photo, and
then try making the copy again.
Chapter 10
126 Use the copy features
Copy
 
						

							
Related topics
•“
Load 10 x 15 cm (4 x 6 inch) photo paper” on page 78
•“
Set the copy paper type” on page 123
Resize an original to fit onto letter or A4 paper
You can use the  Fit to Page feature to copy an original to fit within the printable margins
of a page without the risk of cropping some part of your original. This is useful for reducing
or enlarging an original. For example:
• If you enlarge a 10 x 15 cm (4 x 6 inch) photo to make a borderless full-size copy on
letter or A4 paper, some part of your photo will be cropped. The  Fit to Page feature
will enlarge the photo as much as possible to fit the page without cropping any part
of your photo.
• If the image or text on your original fills the entire sheet of paper with no margins, you
can use the  Fit to Page feature to reduce your original and prevent unwanted
cropping of the text or images at the edges of the sheet.
NOTE: In order to resize your original with out changing the proportions or cropping
the edges, the HP All-in-One might leave an uneven amount of white space around
the edges of the paper.
To resize a document from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press  Copy Menu .
The  Copy Menu  appears.
4. Press 
 to highlight  Size, and then press  OK.
The  Size menu appears.
5. Press 
 to highlight  Fit to Page, and then press  OK.
Resize an original using custom settings
You can use your own custom settings to reduce or enlarge a copy of a document.
To set a custom size from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press  Copy Menu .
The  Copy Menu  appears.
Perform special copy jobs 127
Copy
 
						

							
4.Press  to highlight  Size, and then press  OK.
The  Size menu appears.
5. Press 
 to highlight  Custom 100% , and then press  OK.
The  Custom 100%  menu appears.
6. Use the keypad or press 
 or  to select a percentage to reduce or enlarge the copy.
(The minimum and maximum percentage to resize a copy varies by model.)
7. Press  OK.
Crop an original
After changing settings on the HP All-in-One for making a copy, you can use the crop
feature to specify a particular area of the original to copy.
To crop your copy from the control panel
1. Press  Copy Menu .
The  Copy Menu  appears.
2. Change copy settings on the HP All-in-One to accurately reflect the copy you want to
make.
3. Press 
 to highlight  Crop, and then press  OK.
The  Crop  screen appears.
4. Press the arrows on the directional pad to move the cursor to the upper left corner
where you want the crop to begin, and then press  OK.
5. Press 
 and  to move the cursor to the lower right corner of the crop area, and then
press  OK.
The HP All-in-One shows a preview image of the expected output on the display.
6. Press  Start Copy Black  or Start Copy Color  to accept the preview and begin
copying.
Shift the left margin
You can shift the left margin of the copies by using the  Margin Shift option. This helps
in binding or 3-hole punching for the copies  produced. The HP All-in-One shifts the image
on the copies produced 0.95 cm (3/8 inch) to the right.
NOTE: When the  Margin Shift  feature is enabled, the right side of the copy images
may be cropped.
To shift the margin for your  copy from the control panel
1. Press  Copy Menu .
The  Copy Menu  appears.
2. Change copy settings on the HP All-in-One to accurately reflect the copy you want to
make.
3. Press 
 to highlight  Margin Shift , and then press  OK.
The  Margin Shift  menu appears.
4. Press 
 to highlight  On, and then press  OK.
5. Press  Start Copy Black  or Start Copy Color  to begin copying.
Chapter 10
128 Use the copy features
Copy
 
						

							
Improve the quality of a copy
You can use the Enhancements feature to adjust the quality of text documents by
sharpening edges of black text or adjust photographs by enhancing light colors that might
otherwise appear white.
The  Mixed  enhancement is the default option. Use the  Mixed enhancement to sharpen
edges of most originals. You can use  Photo enhancements to enhance light colors that
might otherwise appear white.
You might be able to fix the following types of issues by changing the  Enhancements
setting to  Photo or None :
• Stray dots of color surround some text on your copies
• Large, black typefaces look splotchy (not smooth)
• Thin, colored objects or lines contain black sections
• Horizontal grainy or white bands appear in light- to medium-gray areas
To copy a blurred document from the control panel
1. Make sure you have paper loaded in the input tray.
2. Load your original print side down on the right front corner of the glass.
3. Press  Copy Menu .
The  Copy Menu  appears.
4. Press 
 to highlight  Enhancements , and then press  OK.
The  Enhancements  menu appears.
5. Press 
 to highlight  Text, and then press  OK.
6. Press  Start Copy Black  or Start Copy Color .
To copy an overexposed photo
1. Make sure you have paper loaded in the input tray.
2. Position the photo on the glass so the long edge of the photo is along the front edge
of the glass.
Load your original print side down on the right front corner of the glass.
3. Press  Copy Menu .
The  Copy Menu  appears.
4. Press 
 to highlight  Enhancements , and then press  OK.
The  Enhancements  menu appears.
5. Press 
 to highlight  Photo, and then press  OK.
6. Press  Start Copy Black  or Start Copy Color .
Stop copying
To stop copying
▲Press  Cancel  on the control panel.
Stop copying 129
Copy