HP PhotoSmart C7283 User Manual

							
5.In the  Printing Shortcuts  list, click the printing shortc ut that you want to delete.
6. Click  Delete .
The printing shortcut is removed from the list.
NOTE: Only the shortcuts that you have created can be deleted. The original HP
shortcuts cannot be deleted.
Perform special print jobs
In addition to supporting standard print jobs, the HP All-in-One can perform special jobs
such as printing borderless images, iron-on transfers, and posters.
This section contains the following topics:
•
Print a borderless image
•
Print a photo on photo paper
•
Print custom CD/DVD labels
•
Print using Maximum dpi
•
Print on both sides of the page
•
Print a multiple-page document as a booklet
•
Print multiple pages on a single sheet
•
Print a multiple-page document in reverse order
•
Reverse an image for iron-on transfers
•
Print on transparencies
•
Print a group of addresses on labels or envelopes
•
Print a poster
•
Print a Web page
Print a borderless image
Borderless printing lets you print to the top, bottom, and side edges of 10 x 15 cm (4 x 6
inch) photo paper.
TIP: For the best results, use HP Premium Photo Papers or HP Premium Plus Photo
Papers to print your photos.
To print a borderless image
1. Load up to 10 x 15 cm (4 x 6 inch) paper in the photo tray or full-size photo paper in
the main input tray.
2. On the  File menu in your software application, click  Print.
3. Make sure the HP All-in-One  is the selected printer.
4. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
5. Click the  Features  tab.
Chapter 7
90 Print from your computer
Print
 
						

							
6.In the  Size list, click the size of photo paper loaded in the photo tray.
If a borderless image can be printed on the specified size, the  Borderless printing
check box is enabled.
7. In the  Paper Type  drop-down list, click  More, and then select the appropriate paper
type.
NOTE: You cannot print a borderless image if the paper type is set to  Plain
paper  or to a type of paper other than a photo paper.
8.Select the  Borderless printing  check box if it is not already checked.
If the borderless paper size and paper ty pe are not compatible, the HP All-in-One
software displays an alert and allows you to select a different type or size.
9. Click  OK, and then click  Print or OK  in the  Print dialog box.
Print a photo on photo paper
For high-quality photo printing, HP recommends you use HP Premium Plus Photo
Papers with the HP All-in-One.
To print a photo on photo paper
1.Remove all paper from the input tray, and then load the photo paper print side down.
2. On the  File menu in your software application, click  Print.
3. Make sure the HP All-in-One is the selected printer.
4. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
5. Click the  Features  tab.
6. In the  Basic Options  area, select the appropriate photo paper type from the  Paper
Type  drop-down list.
7. In the  Resizing Options  area, click the appropriate paper size from the  Size list.
If the paper size and paper type are not compatible, the HP All-in-One software
displays an alert and allows you to select a different type or size.
8. In the  Basic Options  area, select a high print quality, such as  Best or Maximum
dpi  from the  Print Quality  drop-down list.
9. In the  HP Real Life technologies  area, click the Photo fix drop-down list and select
from the following options:
• Off:  applies no  HP Real Life technologies  to the image.
• Basic:  automatically focuses  the image; moderately adjusts image sharpness.
• Full:  automatically lightens dark images; automatically adjusts sharpness,
contrast, and focus of images; automatically removes red-eye.
10. Click  OK to return to the  Properties dialog box.
11. If you want to print the photo in black and white, click the  Color tab and select the
Print in grayscale  check box.
12. Click  OK, and then click  Print or OK  in the  Print dialog box.
Perform special print jobs 91
Print
 
						

							
NOTE:Do not leave unused photo paper in the input tray. The paper might start to
curl, which could reduce the quality of your printout. Photo paper should be flat before
printing.
Print custom CD/DVD labels 
You can use the HP Photosmart Software or online templates from the HP Web site to
create and print a custom label on CD/DVD tattoo paper. You can affix the printed CD/
DVD tattoo to any CD/DVD.
To print a CD/DVD tattoo
1. Use the HP Photosmart Software, or go to 
www.hp.com  to access templates for
creating CD/DVD labels.
2. Load 13 x 18 cm (5 x 7 inch) CD/DVD tattoo paper in the main input tray.
3. On the  File menu in your software application, click  Print.
4. Make sure the HP All-in-One  is the selected printer.
5. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
6. Click the  Features  tab.
7. In the  Paper Type  drop-down list, click  More, and then select  HP CD/DVD tattoo
paper  from the list.
8. Click  OK, and then click  Print or OK  in the  Print dialog box.
Print using  Maximum dpi
Use Maximum dpi  mode to print high-quality, sharp images.
To get the most benefit from  Maximum dpi mode, use it to print high-quality images such
as digital photographs. When you select the  Maximum dpi setting, the printer software
displays the optimized dots per inch (dpi) that the HP All-in-One will print.
Printing in  Maximum dpi  takes longer than printing with other settings and requires a
large amount of disk space.
To print in Maximum dpi mode
1. Make sure you have paper loaded in the input tray.
2. On the  File menu in your software application, click  Print.
3. Make sure the HP All-in-One  is the selected printer.
4. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
5. Click the  Features  tab.
6. In the  Paper Type  drop-down list, click  More, and then select the appropriate paper
type.
Chapter 7
92 Print from your computer
Print
 
						

							
7.In the  Print Quality  drop-down list, click  Maximum dpi.
NOTE:To view the maximum dpi that the HP All-in-One will print, click
Resolution .
8.Select any other print settings that you want, and then click  OK.
Print on both sides of the page
You can print two-sided pages with the HP All-in-One. When printing two-sided pages,
make sure to use paper that is thick enough so that images do not show through to the
other side.
To print on both sides of the page
1. Load paper into the input tray.
2. On the  File menu in your software application, click  Print.
3. Make sure the HP All-in-One is the selected printer.
4. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
5. Click the  Features  tab.
6. In the  Paper saving options  area, select Two-sided printing .
7. Click  OK, and then click  Print or OK  in the  Print dialog box.
Related topics
“
Recommended papers for printing and copying” on page 73
Print a multiple-page document as a booklet
The HP All-in-One allows you to print your document as a small booklet, which you can
fold and then staple together.
For best results, design your document to fit on a multiple of four pages, such as an 8,
12, or 16-page program for a childs school play or for a wedding.
To print a multiple-page document as a booklet
1. Load paper into the input tray.
The paper should be thick enough so that the images do not show through to the
other side.
2. On the  File menu in your software application, click  Print.
3. Make sure the HP All-in-One is the selected printer.
4. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
5. Click the  Features  tab.
6. In the  Paper saving options  area, select Two-sided printing .
Perform special print jobs 93
Print
 
						

							
7.Select the binding edge from the  Booklet layout is list, as appropriate for your
language.
• If your language reads left-to-right, click  Left edge binding.
• If your language reads right-to-left, click  Right edge binding.
The  Pages per sheet  box is automatically set to two pages per sheet.
8. Click  OK, and then click  Print or OK  in the  Print dialog box.
The HP All-in-One begins printing.
9. Wait until the HP All-in-One has stopped printing for several seconds before removing
any of the printed pages from the output tray.
If you remove the pages while the document is still printing, the pages might get out
of order.
10. When the entire document has finished printing, fold the stack of paper in half, so that
the first page is on top, then staple the document along the crease.
TIP: For best results, use a saddle stapler, or a heavy-duty stapler with a long
reach to staple the booklet.
13 5 7
9
11
Figure 7-1 Left-edge binding  for left-to-right languages
1
3
5
7911
Figure 7-2 Right-edge bindi
ng for right-to-left languages
Chapter 7
94 Print from your computer
Print
 
						

							
Print multiple pages on a single sheet
You can print up to 16 pages on a single sheet of paper.
To print multiple pages on a single sheet
1.Make sure you have paper loaded in the input tray.
2. On the  File menu in your software application, click  Print.
3. Make sure the HP All-in-One is the selected printer.
4. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
5. Click the  Features  tab.
6. In the  Pages per sheet  list, click 2, 4,  6, 8 , 9 , or  16.
7. If you want a border to appear around each page image printed on the sheet of paper,
select the  Print page borders  check box.
8. In the  Page order  list, click an appropriate page order option.
The sample output graphic is numbered to show how the pages will be ordered if you
select each option.
9. Click  OK, and then click  Print or OK  in the  Print dialog box.
Print a multiple-page document in reverse order
Because of the way the paper feeds through the HP All-in-One, the first page that prints
is print side up at the bottom of the stack. Usually this means you need to put the printed
pages in the correct order.
12345
A better way is to print the document in reverse order so that the pages are stacked
correctly.
5 4 3 2
1
TIP: Set this option as a default setting so you do not have to remember to set it
every time you print a multiple-page document.
Perform special print jobs 95
Print
 
						

							
To print a multiple-page document in reverse order
1.Make sure you have paper loaded in the input tray.
2. On the  File menu in your software application, click  Print.
3. Make sure the HP All-in-One  is the selected printer.
4. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
5. Click the  Advanced  tab.
6. In the  Layout Options  area, select Front to Back  in the Page Order  option.
NOTE:If you set your document to print on both sides of the page, the  Front to
Back  option is not available. Your document will automatically print in the correct
order.
7. Click  OK, and then click  Print or OK  in the  Print dialog box.
NOTE: When you are printing multiple copies, each set is printed completely
before the next set is printed.
Reverse an image for iron-on transfers
This feature reverses an image so you can use  it for iron-on transfers. This feature is also
useful for transparencies when you want to make notations on the back of the
transparency without scratching the original.
To reverse an image for iron-on transfers
1. On the  File menu in your software application, click  Print.
2. Make sure the HP All-in-One  is the selected printer.
3. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
4. Click the  Features  tab.
5. In the  Paper Type  drop-down list, click  More, and then select  HP Iron-on Transfer
from the list.
6. If the selected size is not what you want, click an appropriate size in the  Size list.
7. Click the  Advanced  tab.
8. In the  Printer Features  area, select On from the  Mirror Image  drop-down list.
9. Click  OK, and then click  Print or OK  in the  Print dialog box.
NOTE: To prevent jams, manually feed the iron-on transfer sheets into the input
tray one sheet at a time.
Print on transparencies
For the best results, HP recommends you use HP transparency products with the HP All-
in-One.
Chapter 7
96 Print from your computer
Print
 
						

							
To print on transparencies
1.Load the transparency into the input tray.
2. On the  File menu in your software application, click  Print.
3. Make sure the HP All-in-One is the selected printer.
4. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
5. Click the  Features  tab.
6. In the  Paper Type  drop-down list, click  More, and then select the appropriate paper
type.
TIP: If you want to make notations on the back of the transparencies and erase
them later without scratching the original, click the  Advanced tab, and select the
Mirror Image  check box.
7.In the  Resizing Options  area, click an appropriate size in the  Size list.
8. Click  OK, and then click  Print or OK  in the  Print dialog box.
NOTE: The HP All-in-One automatically waits for transparencies to dry before
releasing them. Ink dries slower on film than on plain paper. Make sure you allow
enough time for the ink to dry before handling the transparency.
Print a group of addresses on labels or envelopes
With the HP All-in-One, you can print on a single envelope, a group of envelopes, or label
sheets designed for inkjet printers.
To print a group of addresses on labels or envelopes
1. Print a test page on plain paper first.
2. Place the test page on top of the label sheet or envelope, and hold both up to the
light. Check the spacing for each block of text. Make adjustments as needed.
3. Load the labels or envelopes into the main input tray.
CAUTION: Do not use envelopes with clasps or windows. They can get stuck in
the rollers and cause paper jams.
4. Slide the paper-length and paper-width guides inward against the stack of labels or
envelopes until the guides stop.
5. If you are printing on envelopes, do the following:
a. Display the print settings, and click the  Features tab.
b . In the  Resizing Options  area, click the appropriate envelope size in the  Size list.
6. Click  OK, and then click  Print or OK  in the  Print dialog box.
Perform special print jobs 97
Print
 
						

							
Print a poster
You can create a poster by printing a document on multiple pages. The HP All-in-One
prints dotted lines on some pages to indicate where to trim the pages before taping them
together.
To print a poster
1.Make sure you have paper loaded in the input tray.
2. On the  File menu in your software application, click  Print.
3. Make sure the HP All-in-One  is the selected printer.
4. Click the button that opens the  Properties dialog box.
Depending on your software application, this button might be called  Properties,
Options , Printer Setup , Printer , or Preferences .
5. Click the  Advanced  tab.
6. Expand  Document Options , and then expand Printer Features.
7. In the  Poster Printing  drop-down list, click either  2x2 (4 sheets), 3x3 (9 sheets) ,
4x4 (16 sheets) , or 5x5 (25 sheets) .
This selection tells the HP All-in-One to enlarge your document so that it fits on 4, 9,
16, or 25 pages.
If your originals are of multiple pages, each  of those pages will be printed on 4, 9, 16,
or 25 pages. For example, if you have a one-page original and you select 3x3, you
will get 9 pages; if you select 3x3 for a two-page original, 18 pages will print.
8. Click  OK, and then click  Print or OK  in the  Print dialog box.
9. After the poster has printed, trim the edges of the sheets and tape the sheets together.
Print a Web page
You can print a Web page from your Web browser on the HP All-in-One.
To print a Web page
1.Make sure you have paper loaded in the main input tray.
2. On the  File menu in your Web browser, click  Print.
The  Print  dialog box appears.
Chapter 7
98 Print from your computer
Print
 
						

							
3.Make sure the HP All-in-One is the selected printer.
4. If your Web browser supports it, select the items on the Web page that you want to
include in the printout.
For example, in Internet Explorer, click the  Options tab to select options such as  As
laid out on screen , Only the selected frame , and Print all linked documents .
5. Click  Print or OK  to print the Web page.
TIP: To print Web pages correctly, you might need to set your print orientation to
Landscape .
Stop a print job
Although you can stop a print job from either the HP All-in-One or the computer, HP
recommends you stop it from the HP All-in-One for best results.
NOTE:Although most software applications designed for Windows use the
Windows print spooler, your software application might not use the spooler. An
example of a software application that does not use the Windows print spooler is
PowerPoint in Microsoft Office 97.
If you cannot cancel your print job by using one of the following procedures, consult
the instructions for canceling background printing in the online help for your software
application.
To stop a print job from the HP All-in-One
▲ Press  Cancel  on the control panel. If the print job does not stop, press  Cancel again.
It can take a few moments for the print job to be cancelled.
To stop a print job from the computer (Windows 2000 users)
1. On the Windows  taskbar, click Start, point to  Settings, and then click  Printers.
2. Double-click the HP All-in-One icon.
TIP: You can also double-click the printer icon in the Windows taskbar.
3.Select the print job you want to cancel.
4. On the  Document  menu, click  Cancel Printing  or Cancel , or press the  Delete key
on your keyboard.
It can take a few moments for the print job to be cancelled.
To stop a print job from the computer (Windows XP users)
1. On the Windows  taskbar, click Start, and then click  Control Panel.
2. Open the  Printers and Faxes  control panel.
3. Double-click the HP All-in-One icon.
TIP: You can also double-click the printer icon in the Windows taskbar.
Stop a print job 99
Print