Canon Laser Shot Lbp3500 User Guide

							Loading Paper in a Paper Cassette2-28
Loading and Outputting Paper
2
1Pull out the paper cassette.
CAUTION
Be sure to take the paper cassette out of the printer before loading paper. 
If paper is loaded while the paper cassette is partially pulled out, the paper 
cassette may drop or the printer may become damaged resulting in 
personal injury.
IMPORTANT
•The paper cassette cannot be pulled out horizontally. If you try to pull it out 
forcefully, this may result in damage to the paper cassette.
•Hold the paper cassette with both hands securely because the cassette is heavy.
•Place the removed paper cassette on a flat and stable surface.
Cassette 1
Pull out the paper cassette gently 
until it stops a.Cassette 2
Pull out the paper cassette gently 
until it stops a.
Raise the front side of the paper 
cassette and remove it from the 
printer b.Hold the grips (A) with both hands, 
raise the front side of the paper 
cassette slightly b, and then pull it 
out completely c as shown in the 
figure.
a
a
b
(A)b
c
 
						

							2-29
Loading and Outputting Paper
2
Loading Paper in a Paper Cassette
2When changing the size of the paper to be loaded, adjust the 
length of the paper cassette and change the positions of the 
paper guides.
●When loading paper in Cassette 1, adjust the length of the paper 
cassette according to the paper to be loaded.
When loading paper at sizes of A4, B5, A5, Letter, Executive, and 16K, shorten 
the paper cassette.
When loading paper at sizes of A3, B4, Ledger (11 x 17), and Legal, extend the 
paper cassette.
To adjust the length of the paper cassette, align the lock release lever with   
to release the lock, slide the paper cassette by holding the rear portion of the 
paper cassette, and then align the lock release lever with   to lock the 
cassette.
●While holding the lock release lever of the side paper guides, slide 
the guides to the size mark for the paper to be loaded.
The side paper guides move together. Align the position of (A) with the size mark 
for the paper to be loaded.
IMPORTANT
Do not use the A4R, LTRR, and 8.5 x 13 position.
Cassette 1 Cassette 2
(A)(A)
 
						

							Loading Paper in a Paper Cassette2-30
Loading and Outputting Paper
2
●While holding the lock release lever of the rear paper guide, slide the 
guide to the size mark for the paper to be loaded.
Align the position of (A) with the size mark for the paper to be loaded.
IMPORTANT
Do not use the A4R, LTRR, and 8.5 x 13 position.
3Load the paper stack so that the rear edge is aligned with the 
paper guide.
CAUTION
When loading paper, take care not to cut your hands with the edges of the 
paper.
IMPORTANT
•Be sure to check if the paper guide is at the position of the size of the loaded paper. 
If the paper guide is set at a wrong position, this may result in misfeeds.
•If you use paper that has been poorly cut, multiple sheets of paper may be fed at 
once. In this case, fan the paper thoroughly, and then align the edges of the stack 
on a hard, flat surface.
Cassette 1 Cassette 2
Cassette 1 Cassette 2
(A)
E
(A)
 
						

							2-31
Loading and Outputting Paper
2
Loading Paper in a Paper Cassette
NOTE
To print letterhead paper or paper printed with a logo, load the paper in the proper 
orientation according to the following instructions:
(: Feeding direction)
-When loading paper at a size of A4, B5, A5, Letter, Executive, or 16K in 
landscape orientation, load the paper so that the printing side is facing down, as 
shown in the following figures.
-When loading paper at a size of A3, B4, Ledger (11 x 17), or Legal in portrait 
orientation, load the paper so that the printing side is facing down, as shown in 
the following figures.
Cassette 1 Cassette 2
Cassette 1 Cassette 2
 
						

							Loading Paper in a Paper Cassette2-32
Loading and Outputting Paper
2
4Hold down the paper as shown in the figure, make sure that 
the paper stack does not exceed the load limit marks (A), and 
then set it under the hooks (B) on the paper guides.
Make sure that there is sufficient space between the hooks of the paper guides 
and the paper stack. If there is no sufficient space, slightly reduce the amount of 
paper.
Cassette 1
Cassette 2
IMPORTANT
The paper capacity of Cassette 1 is approximately 250 sheets of plain paper (64 g/
m2), and that of Cassette 2 is approximately 500 sheets of plain paper (64 g/m2). 
Be sure that the paper stack does not exceed the load limit marks on the paper 
guides. If the paper stack exceeds the load limit marks, this may result in misfeeds.
(B)(B)
(A)
(A)(B)
(A)
(B)(B)
(A)
(B)
 
						

							2-33
Loading and Outputting Paper
2
Loading Paper in a Paper Cassette
5When changing the size of the paper to be loaded, set the 
paper size setting switch and paper size register dial to the 
size of the loaded paper.
●Holding the tab of the paper size setting switch (A), set the paper 
size setting switch to the size of the loaded paper.
●Adjust the paper size register dial (B) to set the dial to the size of the 
loaded paper.
IMPORTANT
•Make sure that the paper size the paper size register dial is indicating corresponds 
with the size of the loaded paper before setting the paper cassette in the printer. If 
the paper size that the paper size register dial is indicating does not correspond 
with the size of the loaded paper, this may result in printer malfunction.
•Do not use A4R, LTRR, and 8.5 x 13.
Cassette 1 Cassette 2
Cassette 1 Cassette 2
Ledger (11 x 17), Legal, 
Letter, Executive, 
Custom Paper Size A3, B4, A4, B5, A5, 16K
(A)(A)
Ledger (11 x 17), Legal, 
Letter, Executive, 
Custom Paper Size A3, B4, A4, B5, A5, 16K
(B)(B)
 
						

							Loading Paper in a Paper Cassette2-34
Loading and Outputting Paper
2
6Set the paper cassette in the printer at an angle as shown in 
the figure 
aa a a, then push it into the printer or the paper feeder 
gently and horizontally 
bb b b.
Push the paper cassette into the printer firmly until the front side of the paper 
cassette is flush with the front surface of the printer.
CAUTION
When setting the paper cassette in the printer, be careful not to catch your 
fingers.
Next, configure the printer driver (See p. 2-65).
When Loading Custom Size Paper
Perform the following procedure to load custom size paper.
IMPORTANT
•You can load paper of the following custom paper sizes.
-When loading paper in portrait orientation: Width 210.0 to 297.0 mm; Length 210.0 to 
431.8 mm*
*When loading paper that is 279.5 to 297.0 mm wide in Cassette 1, the paper length should be 210.0 to
420.0 mm.
-When loading paper in landscape orientation: Width 210.0 to 297.0 mm; Length 148.0 
to 297.0 mm
Cassette 1 Cassette 2
b
a
b
a
 
						

							2-35
Loading and Outputting Paper
2
Loading Paper in a Paper Cassette
NOTE
After loading custom size paper in the paper cassette, specify the paper feed direction 
(the loading orientation) of the custom size paper in [Cassettes Settings] in the [Device 
Settings] menu in the Printer Status Window.
1Pull out the paper cassette.
CAUTION
Be sure to take the paper cassette out of the printer before loading paper. 
If paper is loaded while the paper cassette is partially pulled out, the paper 
cassette may drop or the printer may become damaged resulting in 
personal injury.
IMPORTANT
•The paper cassette cannot be pulled out horizontally. If you try to pull it out 
forcefully, this may result in damage to the paper cassette.
•Hold the paper cassette with both hands securely because the cassette is heavy.
•Place the removed paper cassette on a flat and stable surface.
Cassette 1
Pull out the paper cassette gently 
until it stops a.Cassette 2
Pull out the paper cassette gently 
until it stops a.
Raise the front side of the paper 
cassette and remove it from the 
printer b.Hold the grips (A) with both hands, 
raise the front side of the paper 
cassette slightly b, and then pull it 
out completely c as shown in the 
figure.
a
a
b
(A)b
c
 
						

							Loading Paper in a Paper Cassette2-36
Loading and Outputting Paper
2
2When loading paper that is longer than A4 size (297.0 mm 
long) in Cassette 1, adjust the length of the paper cassette.
To adjust the length of the paper cassette, align the lock release lever with   
to release the lock, slide the paper cassette by holding the rear portion of the 
paper cassette, and then align the lock release lever with   to lock the 
cassette.
3Load the paper so that the edge of the paper is aligned with 
the front side of the paper cassette.
CAUTION
When loading paper, take care not to cut your hands with the edges of the 
paper.
IMPORTANT
If you use paper that has been poorly cut, multiple sheets of paper may be fed at 
once. In this case, fan the paper thoroughly, and then align the edges of the stack 
on a hard, flat surface.
Cassette 1 Cassette 2
 
						

							2-37
Loading and Outputting Paper
2
Loading Paper in a Paper Cassette
NOTE
To print letterhead paper or paper printed with a logo, load the paper in the proper 
orientation according to the following instructions:
(: Feeding direction)
-When loading paper in landscape orientation, load the paper so that the printing 
side is facing down as shown in the following figures.
-When loading paper in portrait orientation, load the paper so that the printing side 
is facing down as shown in the following figures.
Cassette 1 Cassette 2
Cassette 1 Cassette 2