Canon Laser Shot Lbp3500 User Guide
Have a look at the manual Canon Laser Shot Lbp3500 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
6-14 Optional Accessories 6 Paper Feeder 1Remove the tape that is securing the paper cassette. 2Pull out the paper cassette from the paper feeder. Pull out the paper cassette until it stops a. a
6-15 Optional Accessories 6 Paper Feeder Hold the grips (A) with both hands, raise the front side of the paper cassette slightly b, and then pull it out completely c as shown in the figure. IMPORTANT •Hold the paper cassette with both hands securely because the cassette is heavy. •Place the removed paper cassette on a flat and stable surface. •The paper cassette cannot be pulled out horizontally. If you try to pull it out forcefully, this may result in damage to the paper cassette. 3While holding the lock release lever of the rear paper guide, slide the guide. (A)b c
6-16 Optional Accessories 6 Paper Feeder 4Remove the tape and packing material. Remove the tape shown in the figure a. Remove the packing material with tape b. a b
6-17 Optional Accessories 6 Paper Feeder 5Place the paper feeder at the installation site. When carrying the paper feeder, hold the center of the lift handles on both sides with both hands. IMPORTANT •Do not touch the connector (A) or feed roller (B) in the paper feeder. This may result in damage to the printer or misfeeds. •Do not install the paper feeder on a platform that may warp from the weight of the printer and optional accessories, or where the printer is liable to sink (such as a carpet or mat). •Secure sufficient space around the paper feeder so that you can install the printer and connect cords such as the power cord and interface cables. (B) (A)
6-18 Optional Accessories 6 Paper Feeder 6When installing the printer unit on the paper feeder, gently set it down so that each surface of the printer unit is flush with the front or side surfaces of the paper feeder. Also, match the positioning pins (A) and connector (B) when setting the printer unit. IMPORTANT If the printer unit cannot be placed on the paper feeder properly, lift the printer once, hold it horizontally, and place it again. If you try to set the printer forcefully without lifting it, the connector and positioning pins may be broken. (A) (A) (B)
6-19 Optional Accessories 6 Paper Feeder 7Attach the cassette protective cover. IMPORTANT Do not put your hand or things on the cassette protective cover, or shove the cover hard. This may damage the cassette protective cover. 8Set the paper cassette in the printer unit and paper feeder. NOTE If the optional duplex unit was previously installed, reinstall it on the printer. For details on the procedure for installing the duplex unit, see Installing the Duplex Unit, on p. 6-25. b a
6-20 Optional Accessories 6 Paper Feeder 9Connect the interface cables except for the USB cable, and connect the power cord. 10Plug the power plug into the AC power outlet. 11Connect the USB cable. IMPORTANT Be sure to turn the printer ON once when loading paper in the paper cassette for the first time after installing the paper feeder. NOTE After installing the paper feeder, you have to specify the settings for the optional accessories in the [Configuration]/[Device Settings] sheet in the printer driver. You can obtain the status of the optional accessories automatically by clicking [Get Device Status] in the [Configuration]/[Device Settings] sheet. Removing the Paper Feeder Remove the paper feeder using the following procedure. WARNING Be sure to turn the printer and computer OFF, unplug the power plug, and then disconnect all the interface cables and power cord from the printer before removing the paper feeder. Otherwise, the power cord or interface cables may be damaged, resulting in a fire or electrical shock. CAUTION •Do not carry the printer with the paper cassette attached. If you do so, the paper cassette may drop resulting in personal injury.
6-21 Optional Accessories 6 Paper Feeder • Do not carry the printer with the paper feeder installed. If you do so, the paper feeder may drop resulting in personal injury. IMPORTANT When moving or servicing the printer, remove the paper feeder and paper cassette. 1Turn the printer and computer OFF, remove the USB cable, and then disconnect the power plug from the AC power outlet. 2Remove all the interface cables and the power cord from the printer. NOTE If the optional duplex unit is installed, remove it from the printer. For details on the procedure for removing the duplex unit, see Removing the Duplex Unit, on p. 6-28. 3Pull out the paper cassettes from the printer unit and paper feeder. 4Remove the cassette protective cover. 5Lift the printer and remove it from the paper feeder. 6Move the paper feeder.
6-22 Optional Accessories 6 Paper Feeder 7Move back the printer unit to the installation site. 8Set the paper cassette in the printer. NOTE If the optional duplex unit was previously installed, reinstall it on the printer. For details on the procedure for installing the duplex unit, see Installing the Duplex Unit, on p. 6-25. 9Connect the interface cables except for the USB cable, and connect the power cord. 10Plug the power plug into the AC power outlet. 11Connect the USB cable.
6-23Duplex Unit 6 Optional Accessories Duplex Unit The duplex unit is to be installed on the rear of the printer unit. WARNING Be sure to turn the printer OFF, unplug the power plug, and then disconnect all the interface cables and power cord from the printer before installing the duplex unit. Otherwise, the power cord or interface cables may be damaged, resulting in a fire or electrical shock. Duplex Unit DU-67