Canon Laser Shot Lbp3500 User Guide
Have a look at the manual Canon Laser Shot Lbp3500 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 367
6-20
Optional Accessories
6
Paper Feeder
9Connect the interface cables except for the USB cable, and
connect the power cord.
10Plug the power plug into the AC power outlet.
11Connect the USB cable.
IMPORTANT
Be sure to turn the printer ON once when loading paper in the paper cassette for
the first time after installing the paper feeder.
NOTE
After installing the paper feeder, you have to specify the settings for the optional
accessories in the [Configuration]/[Device Settings] sheet in the printer...](http://img.usermanuals.tech/thumb/14/56526/w64_canon_laser_shot_lbp3500-user-guide-366.png "Page 367
6-20
Optional Accessories
6
Paper Feeder
9Connect the interface cables except for the USB cable, and
connect the power cord.
10Plug the power plug into the AC power outlet.
11Connect the USB cable.
IMPORTANT
Be sure to turn the printer ON once when loading paper in the paper cassette for
the first time after installing the paper feeder.
NOTE
After installing the paper feeder, you have to specify the settings for the optional
accessories in the [Configuration]/[Device Settings] sheet in the printer...")
![Page 375
6-28
Optional Accessories
6
Duplex Unit
5Connect the interface cables except for the USB cable, and
connect the power cord.
6Plug the power plug into the AC power outlet.
7Connect the USB cable.
NOTE
After installing the duplex unit, you have to specify the settings for the optional
accessories in the [Configuration]/[Device Settings] sheet in the printer driver. You
can obtain the status of the optional accessories automatically by clicking [Get
Device Status] in the [Configuration]/[Device Settings]...](http://img.usermanuals.tech/thumb/14/56526/w64_canon_laser_shot_lbp3500-user-guide-374.png "Page 375
6-28
Optional Accessories
6
Duplex Unit
5Connect the interface cables except for the USB cable, and
connect the power cord.
6Plug the power plug into the AC power outlet.
7Connect the USB cable.
NOTE
After installing the duplex unit, you have to specify the settings for the optional
accessories in the [Configuration]/[Device Settings] sheet in the printer driver. You
can obtain the status of the optional accessories automatically by clicking [Get
Device Status] in the [Configuration]/[Device Settings]...")
6-24 Optional Accessories 6 Duplex Unit Installation Space The dimensions of each part, foot positions, and the space required for using the printer with the duplex unit installed are indicated in the following figures: 544 200 121.6 172.2 93.8184 88.640.6 518 438.7 32.6 277 272 286.6 344 325100100 1193.7 430 718 Tray Extension Auxiliary Tray Multi-purpose Tray Sub-output TrayAuxiliary TrayTray Extension Auxiliary Tray (mm) (mm) • Dimensions of the Printer Front Surface Front Surface • Required Peripheral Space
6-25 Optional Accessories 6 Duplex Unit Installing the Duplex Unit The duplex unit is to be installed on the rear of the printer unit. NOTE The packing materials may be changed in form or position to be placed, or may be added or removed without notice. 1Turn the printer and computer OFF aa a a, remove the USB cable bb b b, and then disconnect the power plug from the AC power outlet cc c c. 2Remove all the interface cables and the power cord from the printer. c ab a
6-26 Optional Accessories 6 Duplex Unit 3Remove the duplex unit cover. Hook your finger in the opening (A) of the duplex unit cover and remove it. IMPORTANT Keep the duplex unit cover. The duplex unit cover is required when the duplex unit is removed. 4Install the duplex unit. Push the duplex unit into the printer fi rmly and horizontally as shown in the fi gures. (A)
6-27 Optional Accessories 6 Duplex Unit CAUTION Push the duplex unit gently to avoid catching your hands. Be careful not to hurt your hands. IMPORTANT If the duplex unit is not installed on the printer firmly (if there is any space between the rear of the printer and the duplex unit), this may result in misfeeds.
6-28 Optional Accessories 6 Duplex Unit 5Connect the interface cables except for the USB cable, and connect the power cord. 6Plug the power plug into the AC power outlet. 7Connect the USB cable. NOTE After installing the duplex unit, you have to specify the settings for the optional accessories in the [Configuration]/[Device Settings] sheet in the printer driver. You can obtain the status of the optional accessories automatically by clicking [Get Device Status] in the [Configuration]/[Device Settings] sheet. Removing the Duplex Unit Remove the duplex unit using the following procedure. Have ready the duplex unit cover removed from the printer when the duplex unit was installed. WARNING Be sure to turn the printer and computer OFF, unplug the power plug, and then disconnect all the interface cables and power cord from the printer before removing the duplex unit. Otherwise, the power cord or interface cables may be damaged, resulting in a fire or electrical shock. IMPORTANT When moving or servicing the printer, remove the duplex unit.
6-29 Optional Accessories 6 Duplex Unit 1Turn the printer and computer OFF, remove the USB cable, and then disconnect the power plug from the AC power outlet. 2Remove all the interface cables and the power cord from the printer. 3Pull out the duplex unit gently until it stops aa a a, then raise the front side of the duplex unit and remove it from the printer bb b b. b a
6-30 Optional Accessories 6 Duplex Unit 4Install the duplex unit cover. Hook your finger in the opening (A) of the duplex unit cover and install it. 5Connect the interface cables except for the USB cable, and connect the power cord. 6Plug the power plug into the AC power outlet. 7Connect the USB cable. (A)
6-31 Network Board 6 Optional Accessories Network Board Install the network board in the expansion slot located on the rear of the printer. *For NB-C2, a CD-ROM may be supplied with the network board. By installing the optional network board, you can use LBP3500 directly connected to a network. Network board Screws (2 pieces) Guide booklet Ferrite core (Only for NB-C1) ER R L NK 1 00 Print server (Windows 98/Me/2000/XP/Server 2003/Vista) Client (Windows 98/Me/2000/XP/Server 2003/Vista) Client (Windows 98/Me/2000/XP/Server 2003/Vista) Client (Windows 98/Me/2000/XP/Server 2003/Vista) Client (Windows 98/Me/2000/XP/Server 2003/Vista) Connecting the network board on the printer directly to the computer Connecting the printer to the computer via a print server LBP3500 (Network board installed) LBP3500 (Network board installed) * If your print server is Windows 98/Me, you cannot download and install the driver on Windows 2000/XP/Server 2003/Vista. * If the print server is running Windows Vista, you cannot download and install the driver on Windows 98/Me. :TCP/IP :TCP/IP : Usable Protocols
6-32 Optional Accessories 6 Network Board CAUTION • Be sure to turn the printer OFF, unplug the power plug, and then disconnect all the interface cables and power cord from the printer before installing the network board. If a USB cable is connected, turn the computer off, and then remove the USB cable. If you attempt to install the network board when the printer is ON or any cable is connected to the printer, this may result in an electrical shock. • Be careful when handling the network board. Touching the edges or a sharp portion of the network board may result in personal injury. IMPORTANT The network board contains components that are sensitive to static electricity. Observe the following precautions when handling the network board to prevent damage from static electricity. -Touch a metal object to dissipate static electricity before handling the network board. -W hen handling the network board, do not touch anything that generates static electricity such as the computer display. - Do not touch the network board parts, printed wire, or connectors with your hands. -T o prevent the network board from being affected by static electricity, keep it in the protective bag until it is ready to be installed. The protective bag is required after the network board is removed. Keep the protective bag and do not discard of it. NOTE This network board does not come with a LAN cable. A Category 5 twisted pair cable is required for installing the network board and connecting the printer to a network. Have cables or a hub ready as needed.
6-33 Optional Accessories 6 Network Board Parts and Their Functions a a a a Printer Connector Connects to the printer. Do not touch the connector directly with your hands. b b b b LAN Connector Connects to a 10BASE-T/100BASE-TX LAN cable. c c c c 100 Indicator (Green) Comes on when the network board is connected to the network by 100BASE-TX. Does not come on when connected by 10BASE-T. d d d d LNK Indicator (Green) Comes on when the network board is connected to the network properly. e e e e ERR Indicator (Orange) Comes on or blinks when the network board is not wo rking properly. ff f f MAC Address It is required when setting the IP address using the ARP/PING command. It may be also required when installing the printer driver. IMPORTANT The MAC address for NB-C1 can be found at the location of (A). E R R LN K 100 a cb de f ERR LNK 100ER R L NK 1 00 (A)