Canon Laser Shot Lbp3500 User Guide
Have a look at the manual Canon Laser Shot Lbp3500 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 166
3-37Installing the CAPT Software
Setting Up the Printing Environment
3
6Make sure that [Use an existing port] is selected, select the
USB port to which this printer is connected, and then click
[Next].
7Click [Have Disk].
8Insert the supplied LBP3500 User Software CD-ROM into
the CD-ROM drive, and then click [Browse].
If CD-ROM Setup appears, click [Exit].](http://img.usermanuals.tech/thumb/14/56526/w64_canon_laser_shot_lbp3500-user-guide-165.png "Page 166
3-37Installing the CAPT Software
Setting Up the Printing Environment
3
6Make sure that [Use an existing port] is selected, select the
USB port to which this printer is connected, and then click
[Next].
7Click [Have Disk].
8Insert the supplied LBP3500 User Software CD-ROM into
the CD-ROM drive, and then click [Browse].
If CD-ROM Setup appears, click [Exit].")
![Page 167
3-38Installing the CAPT Software
Setting Up the Printing Environment
3
9Select [D:\English\Win2K_Vista]. Select [CNAB6STK.INF],
then click [Open].
The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive
name may differ depending on the computer you are using.
10Confirm the contents of [Copy manufacturers files from], then
click [OK].
For example, when your CD-ROM drive is drive [D:], it is displayed as
[D:\English\Win2K_Vista].](http://img.usermanuals.tech/thumb/14/56526/w64_canon_laser_shot_lbp3500-user-guide-166.png "Page 167
3-38Installing the CAPT Software
Setting Up the Printing Environment
3
9Select [D:\English\Win2K_Vista]. Select [CNAB6STK.INF],
then click [Open].
The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive
name may differ depending on the computer you are using.
10Confirm the contents of [Copy manufacturers files from], then
click [OK].
For example, when your CD-ROM drive is drive [D:], it is displayed as
[D:\English\Win2K_Vista].")
![Page 168
3-39Installing the CAPT Software
Setting Up the Printing Environment
3
11Click [Next].
12Enter a new name in [Printer name] if you want to change the
printer name, then click [Next].
Copying files is started.
NOTE
•If another printer driver has already been installed in the computer, [Set as the
default printer] appears. When specifying the printer as the default printer, select
the [Set as the default printer] check box.
•If the [User Account Control] dialog box appears, click [Continue].
•If the...](http://img.usermanuals.tech/thumb/14/56526/w64_canon_laser_shot_lbp3500-user-guide-167.png "Page 168
3-39Installing the CAPT Software
Setting Up the Printing Environment
3
11Click [Next].
12Enter a new name in [Printer name] if you want to change the
printer name, then click [Next].
Copying files is started.
NOTE
•If another printer driver has already been installed in the computer, [Set as the
default printer] appears. When specifying the printer as the default printer, select
the [Set as the default printer] check box.
•If the [User Account Control] dialog box appears, click [Continue].
•If the...")
![Page 169
3-40Installing the CAPT Software
Setting Up the Printing Environment
3
13When printing a test page, click [Print a test page].
A dialog box appears after a test page is printed. Click [close] to close the dialog
box.
14Click [Finish].
15If the printer and computer are not connected, turn the
computer off, connect the computer and printer with a USB
cable, and then turn them ON.
IMPORTANT
If you want to use the computer in which the printer driver was installed as the print
server, configure Windows...](http://img.usermanuals.tech/thumb/14/56526/w64_canon_laser_shot_lbp3500-user-guide-168.png "Page 169
3-40Installing the CAPT Software
Setting Up the Printing Environment
3
13When printing a test page, click [Print a test page].
A dialog box appears after a test page is printed. Click [close] to close the dialog
box.
14Click [Finish].
15If the printer and computer are not connected, turn the
computer off, connect the computer and printer with a USB
cable, and then turn them ON.
IMPORTANT
If you want to use the computer in which the printer driver was installed as the print
server, configure Windows...")
![Page 170
3-41Installing the CAPT Software
Setting Up the Printing Environment
3
For Windows XP/Server 2003
IMPORTANT
When printing a test page, make sure that the printer is properly connected to the
computer and the printer is ON before installing the CAPT software.
1Turn the computer on and start up Windows XP/Server 2003.
2Log on as a member of Administrators.
IMPORTANT
If a Wizard appears by the Plug and Play automatic setup, click [Cancel], and then
install the CAPT software using this procedure.
NOTE
Full...](http://img.usermanuals.tech/thumb/14/56526/w64_canon_laser_shot_lbp3500-user-guide-169.png "Page 170
3-41Installing the CAPT Software
Setting Up the Printing Environment
3
For Windows XP/Server 2003
IMPORTANT
When printing a test page, make sure that the printer is properly connected to the
computer and the printer is ON before installing the CAPT software.
1Turn the computer on and start up Windows XP/Server 2003.
2Log on as a member of Administrators.
IMPORTANT
If a Wizard appears by the Plug and Play automatic setup, click [Cancel], and then
install the CAPT software using this procedure.
NOTE
Full...")
![Page 171
3-42Installing the CAPT Software
Setting Up the Printing Environment
3
5Click [Next].
6Make sure that [Local printer attached to this computer] is
selected, then click [Next].
NOTE
Do not select the [Automatically detect and install my Plug and Play printer] check
box.](http://img.usermanuals.tech/thumb/14/56526/w64_canon_laser_shot_lbp3500-user-guide-170.png "Page 171
3-42Installing the CAPT Software
Setting Up the Printing Environment
3
5Click [Next].
6Make sure that [Local printer attached to this computer] is
selected, then click [Next].
NOTE
Do not select the [Automatically detect and install my Plug and Play printer] check
box.")
![Page 172
3-43Installing the CAPT Software
Setting Up the Printing Environment
3
7Make sure that [Use the following port] is selected, select the
USB port to which this printer is connected, and then click
[Next].
8Click [Have Disk].
9Insert the supplied LBP3500 User Software CD-ROM into
the CD-ROM drive, and then click [Browse].
If CD-ROM Setup appears, click [Exit].](http://img.usermanuals.tech/thumb/14/56526/w64_canon_laser_shot_lbp3500-user-guide-171.png "Page 172
3-43Installing the CAPT Software
Setting Up the Printing Environment
3
7Make sure that [Use the following port] is selected, select the
USB port to which this printer is connected, and then click
[Next].
8Click [Have Disk].
9Insert the supplied LBP3500 User Software CD-ROM into
the CD-ROM drive, and then click [Browse].
If CD-ROM Setup appears, click [Exit].")
![Page 173
3-44Installing the CAPT Software
Setting Up the Printing Environment
3
10Select [D:\English\Win2K_Vista]. Select [CNAB6STK.INF],
then click [Open].
The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive
name may differ depending on the computer you are using.
11Confirm the contents of [Copy manufacturers files from], then
click [OK].
For example, when your CD-ROM drive is drive [D:], it is displayed as
[D:\English\Win2K_Vista].
12Click [Next].](http://img.usermanuals.tech/thumb/14/56526/w64_canon_laser_shot_lbp3500-user-guide-172.png "Page 173
3-44Installing the CAPT Software
Setting Up the Printing Environment
3
10Select [D:\English\Win2K_Vista]. Select [CNAB6STK.INF],
then click [Open].
The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive
name may differ depending on the computer you are using.
11Confirm the contents of [Copy manufacturers files from], then
click [OK].
For example, when your CD-ROM drive is drive [D:], it is displayed as
[D:\English\Win2K_Vista].
12Click [Next].")
![Page 174
3-45Installing the CAPT Software
Setting Up the Printing Environment
3
13Enter a new name in [Printer name] if you want to change the
printer name, then click [Next].
NOTE
If another printer driver has already been installed in the computer, the message appears. In this case, select [Yes] or [No].
14Click [Next].
NOTE
When sharing this printer on a network, select [Share name], and then click [Next].
The window for entering [Location] and [Comment] is displayed. Enter them as
needed, then click...](http://img.usermanuals.tech/thumb/14/56526/w64_canon_laser_shot_lbp3500-user-guide-173.png "Page 174
3-45Installing the CAPT Software
Setting Up the Printing Environment
3
13Enter a new name in [Printer name] if you want to change the
printer name, then click [Next].
NOTE
If another printer driver has already been installed in the computer, the message appears. In this case, select [Yes] or [No].
14Click [Next].
NOTE
When sharing this printer on a network, select [Share name], and then click [Next].
The window for entering [Location] and [Comment] is displayed. Enter them as
needed, then click...")
![Page 175
3-46Installing the CAPT Software
Setting Up the Printing Environment
3
15When printing a test page, click [Yes], then click [Next].
16Click [Finish].
Copying files is started.
When printing a test page, a dialog box will appear after printing. Click [OK] to
close the dialog box.
NOTE
If the [Hardware Installation] dialog box appears, click [Continue Anyway].](http://img.usermanuals.tech/thumb/14/56526/w64_canon_laser_shot_lbp3500-user-guide-174.png "Page 175
3-46Installing the CAPT Software
Setting Up the Printing Environment
3
15When printing a test page, click [Yes], then click [Next].
16Click [Finish].
Copying files is started.
When printing a test page, a dialog box will appear after printing. Click [OK] to
close the dialog box.
NOTE
If the [Hardware Installation] dialog box appears, click [Continue Anyway].")
3-42Installing the CAPT Software Setting Up the Printing Environment 3 5Click [Next]. 6Make sure that [Local printer attached to this computer] is selected, then click [Next]. NOTE Do not select the [Automatically detect and install my Plug and Play printer] check box.
3-43Installing the CAPT Software Setting Up the Printing Environment 3 7Make sure that [Use the following port] is selected, select the USB port to which this printer is connected, and then click [Next]. 8Click [Have Disk]. 9Insert the supplied LBP3500 User Software CD-ROM into the CD-ROM drive, and then click [Browse]. If CD-ROM Setup appears, click [Exit].
3-44Installing the CAPT Software Setting Up the Printing Environment 3 10Select [D:\English\Win2K_Vista]. Select [CNAB6STK.INF], then click [Open]. The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive name may differ depending on the computer you are using. 11Confirm the contents of [Copy manufacturers files from], then click [OK]. For example, when your CD-ROM drive is drive [D:], it is displayed as [D:\English\Win2K_Vista]. 12Click [Next].
3-45Installing the CAPT Software Setting Up the Printing Environment 3 13Enter a new name in [Printer name] if you want to change the printer name, then click [Next]. NOTE If another printer driver has already been installed in the computer, the message appears. In this case, select [Yes] or [No]. 14Click [Next]. NOTE When sharing this printer on a network, select [Share name], and then click [Next]. The window for entering [Location] and [Comment] is displayed. Enter them as needed, then click [Next].
3-46Installing the CAPT Software Setting Up the Printing Environment 3 15When printing a test page, click [Yes], then click [Next]. 16Click [Finish]. Copying files is started. When printing a test page, a dialog box will appear after printing. Click [OK] to close the dialog box. NOTE If the [Hardware Installation] dialog box appears, click [Continue Anyway].
3-47Installing the CAPT Software Setting Up the Printing Environment 3 17If the printer and computer are not connected, turn the computer off, connect the computer and printer with a USB cable, and then turn them ON. IMPORTANT If you are using a computer with Windows XP Service Pack 2 or another operating system equipped with Windows Firewall as the print server, you need to configure Windows Firewall to unblock communication with the client computers. (See p. 8-12) The installation of the printer driver is completed. For Windows 2000 IMPORTANT When printing a test page, make sure that the printer is properly connected to the computer and the printer is ON before installing the CAPT software. 1Turn the computer on and start up Windows 2000. 2Log on as a member of Administrators. IMPORTANT If a Wizard appears by the Plug and Play automatic setup, click [Cancel], and then install the CAPT software using this procedure. NOTE Full Control Permission is required for the installation of the printer driver.
3-48Installing the CAPT Software Setting Up the Printing Environment 3 3From the [Start] menu, select [Settings] ➞ [Printers] to open the [Printers] folder. Then, double-click [Add Printer]. 4Click [Next]. 5Make sure that [Local printer] is selected, then click [Next]. NOTE Do not select the [Automatically detect and install my Plug and Play printer] check box.
3-49Installing the CAPT Software Setting Up the Printing Environment 3 6Select the USB port for connecting this printer, and then click [Next]. 7Click [Have Disk]. 8Insert the supplied LBP3500 User Software CD-ROM into the CD-ROM drive, and then click [Browse]. If CD-ROM Setup appears, click [Exit].
3-50Installing the CAPT Software Setting Up the Printing Environment 3 9Select [D:\English\Win2K_Vista]. Select [CNAB6STK.INF], then click [Open]. The CD-ROM drive name is indicated as D: in this manual. The CD-ROM drive name may differ depending on the computer you are using. 10Confirm the contents of [Copy manufacturers files from], then click [OK]. For example, when your CD-ROM drive is drive [D:], it is displayed as [D:\English\Win2K_Vista]. 11Click [Next].
3-51Installing the CAPT Software Setting Up the Printing Environment 3 12Enter a new name in [Printer name] if you want to change the printer name, then click [Next]. NOTE If another printer driver has already been installed in the computer, the message appears. In this case, select [Yes] or [No]. 13Click [Next]. NOTE When sharing this printer on a network, select [Shared as], and then click [Next]. The window for entering [Location] and [Comment] is displayed. Enter them as needed, then click [Next].