Canon Laser Shot Lbp3500 User Guide

							Output Tray2-18
Loading and Outputting Paper
2
When outputting A3 size paper or other long-size paper to the output tray, pull out 
the auxiliary tray to prevent the paper from hanging out of the output tray. When you 
use the auxiliary tray, gently open it until it stops.
IMPORTANT
•Printed paper can be output only to the output tray when performing automatic 2-sided 
printing.
•During 2-sided printing, do not touch the paper until it is output to the output tray 
completely. In 2-sided printing, the paper is partially output once after printed on its 
surface and is fed again to be printed on its reverse side.
•The surroundings of the output tray are hot during printing or immediately after printing. 
When taking out of the paper or removing jammed paper, do not touch the surroundings 
of the output tray.
NOTE
The output tray can hold up to approximately 250 sheets of plain paper (64 g/m2). The 
paper capacity varies depending on the paper size or paper type. For more details, see 
Paper Capacity of the Output Trays, on p. 2-21.
 
						

							2-19
Loading and Outputting Paper
2
Output Tray
Sub-output Tray
Printed paper is output to the sub-output tray on the rear of the printer unit with the 
printed side facing up. Printed paper is stacked with the page order reversed. The 
sub-output tray is suitable to print transparencies, labels, or envelopes that curl 
easily, since the printed paper is output flattened.
 
						

							Output Tray2-20
Loading and Outputting Paper
2
When outputting A4 size paper or other large-size paper to the sub-output tray, pull 
out the auxiliary tray to prevent the paper from hanging out of the sub-output tray. 
When outputting A3 size paper or other long-size paper to the sub-output tray, open 
the tray extension. When you use the tray extension, gently open it until it stops.
IMPORTANT
•Be sure to close the sub-output tray before performing automatic 2-sided printing.
•Do not open the sub-output tray during automatic 2-sided printing.
 
						

							2-21
Loading and Outputting Paper
2
Output Tray •
The surroundings of the sub-output tray are hot during printing or immediately after 
printing. When taking out of the paper or removing jammed paper, do not touch the 
surroundings of the sub-output tray.
NOTE
The sub-output tray can hold up to approximately 50 sheets of plain paper (64 g/m2). The 
paper capacity varies depending on the paper size or paper type. For more details, see 
Paper Capacity of the Output Trays, on p. 2-21.
Paper Capacity of the Output Trays
*Actual paper capacity varies depending on the installation environment and paper type.
Paper TypeOutput Trays*
Output TraySub-output Tray
Plain paper (64 g/m
2)Approx. 250 sheets Approx. 50 sheets
Heavy paper (128 g/m
2)Approx. 150 sheets Approx. 30 sheets
Transparency Approx. 100 sheets 1 sheet
Label Approx. 100 sheets Approx. 20 sheets
Envelope Approx. 50 sheets Approx. 10 sheets
 
						

							Output Tray2-22
Loading and Outputting Paper
2
Selecting an Output Tray
Switching to the Sub-output Tray
Switch an output tray to the sub-output tray using the following procedure.
1Open the sub-output tray aa a a.
When outputting A4 size paper or other large-size paper, pull out the auxiliary 
tray b.
a
b
 
						

							2-23
Loading and Outputting Paper
2
Output Tray
When outputting A3 size paper or other long-size paper, open the tray extension 
c.
2Select [Auto] or [Sub-output Tray] in [Paper Output] in the 
[Finishing] sheet in the printer driver.
Make sure that the sub-output tray is opened before selecting [Auto]. If the 
sub-output tray is closed, printed paper is output to the output tray.
IMPORTANT
Paper is output to the sub-output tray with the printed side facing up. Therefore, 
when printing from the first page, the paper is stacked with the page order 
reversed. If you want the printer to output paper with the pages collated in the right 
order, select the [Reverse Output Order When Using Sub-output Tray] check box in 
the [Finishing Details] dialog box in the [Finishing] sheet, and you can output paper 
with the pages collated in the right order because the printer prints from the last 
page (The [Reverse Output Order When Using Sub-output Tray] check box is 
selected at the default setting).
c
 
						

							Output Tray2-24
Loading and Outputting Paper
2
Switching to the Output Tray
Switch an output tray to the output tray using the following procedure.
1Close the tray extension and auxiliary tray aa a a, then close the 
sub-output tray 
bb b b.
b
a
 
						

							2-25
Loading and Outputting Paper
2
Output Tray
2Select [Auto] or [Output Tray] in [Paper Output] in the 
[Finishing] sheet in the printer driver.
Make sure that the sub-output tray is closed before selecting [Auto]. If the 
sub-output tray is opened, printed paper is output to the sub-output tray.
 
						

							2-26
Loading and Outputting Paper
2
Loading Paper in a Paper Cassette
Loading Paper in a Paper Cassette
The paper cassette can be loaded with up to approximately 250 sheets of plain 
paper (64 g/m2) at sizes of A3, B4, A4, B5, A5, Ledger (11 x 17), Legal, Letter, 
Executive, 16K and plain paper of the following custom paper sizes.
•When loading paper in portrait orientation: Width 210.0 to 297.0 mm; Length 
210.0 to 431.8 mm*
*When loading paper that is 279.5 to 297.0 mm wide in Cassette 1, the paper length should be 210.0 to 420.0 mm.
•When loading paper in landscape orientation: Width 210.0 to 297.0 mm; Length 
148.0 to 297.0 mm
When the paper source has run out of paper, a message indicating there is no 
paper appears in the Printer Status Window, and the   (Load Paper) indicator 
(orange) comes on or blinks. In this case, refill paper.
The paper loading methods are different between standard size paper and custom 
size paper. Therefore, load paper properly using the following procedures.
•When Loading Standard Size Paper (See p. 2-27)
•When Loading Custom Size Paper (See p. 2-34)
IMPORTANT
•For more details on the usable paper, see Usable Paper, on p. 2-2.
•For details on handling the paper cassette, see Precautions for Handling the 
Multi-purpose Tray or Paper Cassette, on p. 2-15.
•Do not load paper other than plain paper (60 - 90 g/m2) in the paper cassette. This may 
result in paper jams or damage to the printer.
NOTE
•Load paper in the optional 250-sheet universal cassette UC-67 in the same manner as 
you load paper in Cassette 1.
•Load paper in the optional 500-sheet universal cassette UC-67K in the same manner as 
you load paper in Cassette 2.
 
						

							2-27
Loading and Outputting Paper
2
Loading Paper in a Paper Cassette
When Loading Standard Size Paper
Perform the following procedure to load standard size paper.
Load paper in portrait or landscape orientation. Depending on the size of the paper 
to be loaded, the loading orientation differs as follows:
Cassette 1
Cassette 2
Ex. A4 Landscape orientation Portrait orientationEx. A3
Paper that can be loaded in portrait orientation:
A3, B4, Ledger (11 x 17), LegalPaper that can be loaded in landscape orientation:
A4, B5, A5, Letter, Executive, 16K
Ex. A4 Ex. A3Landscape orientation Portrait orientation
Paper that can be loaded in portrait orientation:
A3, B4, Ledger (11 x 17), LegalPaper that can be loaded in landscape orientation:
A4, B5, A5, Letter, Executive, 16K