Canon Laser Shot Lbp3500 User Guide

							 8-2 
Specifications 
Appendix
 8  Specifications 
Hardware Specifications 
Type
 
Desktop Page Printer
 
Printing method
 
Electrophoto Method (On-demand fixing)
 
Print speed 
Plain paper (60 to 90 g/m 
2
 
)
 
When printing A4 continuously:
25 pages/min.
*Print speed may drop in stages depending on 
the paper size, paper type, print copies, and the 
settings of the fixing mode. (This is because 
the safety function that prevents damage 
caused by heat becomes active.)
 
Warm up time (Time from power 
on to printer ready)
 
17 seconds or less
*May vary depending on the use conditions 
(such as the availability of the optional 
accessories and installation environment).
 
Recovery time (Time from sleep 
mode to printer ready)
 
15 seconds or less
 
First print time
 
When printing A4 with the printing side facing 
down
10 seconds or less
*May vary depending on the output 
environment.
 
						

							8-3
Appendix
8
Specifications
Paper sizeCassette 1-Standard sizes
A3, B4, A4, B5, A5, Ledger (11 x 17), Legal, 
Letter, Executive, 16K
-Custom paper size
When loading paper in portrait orientation:
Width 210.0 to 297.0 mm; Length 210.0 to 
431.8 mm*
*If the paper width is 279.5 to 297.0 mm, the 
paper length should be 210.0 to 420.0 mm.
When loading paper in landscape orientation:
Width 210.0 to 297.0 mm; Length 148.0 to 
297.0 mm
Paper capacity: approx. 250 sheets (64 g/m
2)
Cassette 2
(Optional)-Standard sizes
A3, B4, A4, B5, A5, Ledger (11 x 17), Legal, 
Letter, Executive, 16K
-Custom paper size
When loading paper in portrait orientation:
Width 210.0 to 297.0 mm; Length 210.0 to 
431.8 mm
When loading paper in landscape orientation:
Width 210.0 to 297.0 mm; Length 148.0 to 
297.0 mm
Paper capacity: approx. 500 sheets (64 g/m
2)
Multi-purpose 
tray-Standard sizes
A3, B4, A4, B5, A5, Ledger (11 x 17), Legal, 
Letter, Executive, Index Card, Envelope DL, 
Envelope COM10, Envelope C5, Envelope 
Monarch, Envelope B5, 8K, 16K
-Custom paper size
When loading paper in portrait orientation:
Width 98.0 to 312.0 mm; Length 148.0 to 470.0 
mm
When loading paper in landscape orientation:
Width 148.0 to 312.0 mm; Length 148.0 to 
312.0 mm
Paper capacity: approx. 100 sheets (64 g/m
2)
Automatic 2-sided printing (The 
optional duplex unit is required)-Standard sizes
A3, B4, A4, B5, A5, Ledger (11 x 17), Legal, 
Letter, Executive, 8K, 16K
-Custom paper size
When loading paper in portrait orientation: 
Width 210.0 to 297.0 mm; Length 210.0 to 
431.8 mm
When loading paper in landscape orientation: 
Width 210.0 to 297.0 mm; Length 148.0 to 
297.0 mm
 
						

							8-4
Appendix
8
Specifications
Paper outputFace-down/Face-up
Output capacityOutput tray: approx. 250 sheets (64 g/m
2)
Sub-output tray: approx. 50 sheets (64 g/m2)
Noise (Declared noise emission in 
accordance with ISO 9296)Lwad (declared A-weighted sound power level 
(1B = 10dB))
During standby: Background noise level
During operation: 6.9 B or less
Sound pressure level (Bystander position)
During standby: 32 dB (A) or less
During operation: 57 dB (A) or less
Operating environment 
(Printer unit only)Operating environment temperature: 10 to 32.5°C 
(50 to 90.5°F)
Humidity: 20 to 80 % RH (no condensation)
Host interfaceUSB interface
-Windows 98/Me: USB Full-Speed (USB1.1 
equivalent)
-
Windows 2000/XP/Server 2003/Vista: USB 2.0 
Hi-Speed/USB Full-Speed (USB1.1 equivalent)
User interface5 LED indicators
1 Operation key
Expansion slot1
Power supply220 -240 V (±10 %) 50/60 Hz (±2 Hz)
Power consumption 
(at temperature of 20°C (68°F))Average during operation: approx. 434 W*
1
Average during standby: approx. 36 W*1
Average during the sleep mode: approx. 7 W*1
Maximum: 1547 W*2 or less
*1When the printer is with standard equipment.
*2However, the instantaneous peak on startup 
shall not be counted.
Consumables Toner cartridgeCanon Genuine Cartridge 309
Number of printable pages: approx. 12,000 
pages*
1
*1When the pages are on the basis of ISO/IEC 
19752*2 on printing A4 size paper with the 
default print density setting
*
2ISO/IEC 19752 is the global standard related 
to Method for the determination of toner 
cartridge yield for monochromatic 
electrophotographic printers and multi-function 
devices that may contain printer components 
issued by ISO (International Organization for 
Standardization).
 
						

							8-5
Appendix
8
Specifications
Software Specifications
WeightPrinter and 
included partsPrinter unit 
(excluding the toner car tridge)  ........... approx. 19.3 kg
Toner cartridge..............................  approx. 1.9 kg
Consumables
and optional 
accessories
Toner cartridge
(Canon Genuine Cartridge 309)  ..........  approx. 2.1 kg
250-sheet universal cassette UC-67* .... approx. 1.8 kg
500-sheet universal cassette UC-67K* .. approx. 2.9 kg
Paper feeder unit PF-67*
(Including the cassette)  ......................... approx. 9.3 kg
Duplex unit DU-67*  ..............................  approx. 3.9 kg
*mark indicates optional products.
Printing softwareCAPT (Canon Advanced Printing Technology)
Printable areaData cannot be printed within a 5 mm margin on all sides 
of the paper. (15 mm for envelopes)
*The data may be printed with the edges missing when a 
document with no margins is printed, even if the [Print 
with Upper Left of Sheet as Starting Point] check box in 
the [Finishing Details] dialog box in the [Finishing] sheet 
is selected. In this case, specify the scaling factor in the 
driver to print smaller so that any data on the document 
will not miss, and then print again.
 
						

							8-6Dimensions of Each Part
Appendix
8
Dimensions of Each Part
■Printer
•Standard state
•State with the paper feeder installed
(mm)Front Surface
121.6 172.2 93.8
438.7 32.6
184
88.640.6
277
344272286.6518
Tray Extension
Auxiliary Tray
Multi-purpose Tray
Auxiliary Tray
Sub-output TrayAuxiliary TrayTray Extension
Front Surface(mm)
121.6 172.2
93.8184
88.640.6
438.7 32.6
518
406.1
473.1401.1415.7
Tray Extension
Auxiliary Tray
Multi-purpose Tray
Sub-output TrayAuxiliary TrayTray Extension
Auxiliary Tray
 
						

							8-7
Appendix
8
Dimensions of Each Part •
State with the duplex unit installed
•State with the paper feeder and duplex unit installed
■Paper Feeder Unit PF-67
121.6 172.2
93.8184
88.640.6
438.7 32.6
277 272 286.6
344
Tray Extension
Auxiliary Tray
Multi-purpose Tray
Sub-output TrayAuxiliary TrayTray Extension
Auxiliary Tray
(mm)Front Surface
121.6 88.6 172.2 93.8
184 40.6
438.7 32.6
518
406.1
473.1 401.1 415.7
Tray Extension
Auxiliary Tray
Multi-purpose Tray
Sub-output TrayAuxiliary TrayTray Extension
Auxiliary Tray
(mm)Front Surface
Front Surface(mm)
160.5
142.6
518
600.9
 
						

							8-8
Appendix
8
Dimensions of Each Part
■Duplex Unit DU-67
Front Surface(mm)
25
133
355
414.4
397.8
 
						

							8-9NetSpot Device Installer
8
Appendix
NetSpot Device Installer
The supplied CD-ROM includes the NetSpot Device Installer, which is a utility that 
can initialize the settings of a printer connected to the network. The NetSpot Device 
Installer is software that allows you to easily initialize the settings of printers 
connected to the network.
For more details on NetSpot Device Installer, see Network Guide.
NOTE
When the printer driver is installed from CD-ROM Setup, the initial settings for the 
network are performed automatically. Use NetSpot Device Installer as needed when 
you want to reset the IP address manually without using CD-ROM Setup.
 
						

							8-10Print Monitor Installer
Appendix
8
Print Monitor Installer
The supplied CD-ROM includes Print Monitor Installer that creates a port (Canon 
CAPT Print Monitor) for connecting your computer to the printer on a TCP/IP 
network, as well as the printing software (CAPT). For more details on Canon CAPT 
Print Monitor, see Network Guide.
NOTE
When the printer driver is installed from CD-ROM Setup, a port (Canon CAPT Print 
Monitor) is created automatically. Use Print Monitor Installer as needed when you want 
to create the port without using CD-ROM Setup.
 
						

							8-11NetSpot Console
8
Appendix
NetSpot Console
NetSpot Console is a utility program for managing printers that are connected to 
the network. NetSpot Console allows you to view a list of printers, display a printer 
map, specify detailed protocol settings, monitor printer states, perform job 
operations, and configure and view a variety of printer information using a web 
browser.
For more details on NetSpot Console, see NetSpot Console Users Guide.
NOTE
You can download NetSpot Console from the Canon website.