Canon Imageprograf Ipf825 User Guide
Have a look at the manual Canon Imageprograf Ipf825 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Important • Do not touch the Linear Scale (a), Carriage Shaft (b), or Ink Tube Stabilizer (c). Touching these parts may damage them. Avoid cleaning where the Carriage is retracted, in position (d) or (e). Note • If the Cleaning Brush is dirty, rinse it in water. Maintenance > Cleaning the Printer > iPF825 Cleaning Inside the Top Cover 11 835
3. Using a damp cloth that you have wrung out completely, wipe away dirt or paper dust (debris from cutting) inside the Top Cover. Wipe away any ink residue and paper dust (debris from cutting) on the Top Cover Roller (a), all over the Platen (b),the Paper Retainer (c), the Borderless Printing Ink Grooves (d), the Ejection Guide (e), the blue Switch (f), the sec- tion around the right-side Borderless Printing Ink Grooves (g), and so on. Important • Do not use a dry cloth to wipe inside the Top Cover. This may create a static charge, which may at- tract dust and affect the printing quality. • Never use flammable solvents such as alcohol, benzene, or thinner. If these substances come into con- tact with electrical components inside the printer, there is a risk of fire or electrical shock. • Do not touch the clear sheet on the side of the Top Cover Roller. This may damage the roller. 4. Close the Top Cover. Maintenance > Cleaning the Printer > Cleaning Inside the Top Cover iPF82511 836
Other Maintenance Preparing to Transfer the Printer ..................................................................................................................... 837 Updating the Firmware .................................................................................................................................... 843Preparing to Transfer the Printer To protect the internal parts in transit, always follow the steps below before transferring the printer to a new location. Refer to the Setup Guide for details on packing the printer and installing it after transfer. Important • Be sure to contact your Canon dealer before transferring the printer to a new location. Ink may leak and dam- age the printer if you do not prepare the printer correctly and it is tipped or stood on end in transit. Note • It is not possible to prepare the printer for transfer if the Display Screen requests Maintenance Cartridge re- placement or checking of the remaining capacity. Replace the Maintenance Cartridge before transfer prepara-tions. (See "Replacing the Maintenance Cartridge .") →P.823 • Depending on the state of the printer, part replacement may be necessary when preparing to transfer the printer (that is, when you execute the printer menu item to prepare for transfer). • Ink must be drained before Level 2 or Level 3 printer transfer, as described in the following table. Prepare a Maintenance Cartridge in advance. • Always follow the instructions of the service representative when transferring the printer under Level 3 con- ditions. Level Shipping Meth- od (Example) Permitted Angle of Inclination Amount of Ink to Dis- pose of Required Mainte- nance Car- tridges(*1) 1 By truck Lengthwise: 0°–30° Rotation: 0°–10° 0 0 or 1 2 By plane All directions: 0°–30° Approx. 200 ml1 or 2 Maintenance > Other Maintenance > iPF825 Preparing to Transfer the Printer 11 837
Level Shipping Meth- od (Example) Permitted Angle of Inclination Amount of Ink to Dis- pose of Required Mainte- nance Car- tridges(*1) 3 Tipping the printer or hold- ing it upright for elevators or stairs Lengthwise: 0°–90° Rotation: 0°–30° Approx. 700 ml2 or 3 *1: The quantity of cartridges required depends on the capacity of the Maintenance Cartridge in use. 1. Remove the Wheeled Output Stacker from the printer. (See "Using the Wheeled Output Stacker .") →P.671 2. Remove the paper. •Rolls (See "Removing the Roll from the Printer .") →P.644 • Sheets (See "Removing Sheets .") →P.669 3. Press the Menu button to display MAIN MENU. 4. Press ▲ or ▼ to select Maintenance, and then press the ▶ button. 5. Press ▲ or ▼ to select Move Printer, and then press the ▶ button. 6. Press ▲ or ▼ to select the level of transfer, and then press the OK button. 7. After the message "Always contact service before preparing to move the printer. " is shown on the Display Screen, press the OK button. The Display Screen indicates " Please Wait..". • If you have selected Level 1 in step 6, after processing in preparation to move the printer is finished, the mes- sage "Finished preparing to move printer. Turn off printer. " is shown on the Display Screen. Go to step 15. • When you are finished preparing to transfer the printer after selecting Level 2 or Level 3 conditions, the Dis- play Screen requests you to open the Ink Tank Cover. Follow the procedure starting with step 8. Important • If consumables must be replaced, the message " Consumables must be replaced. Call for service. " is shown on the Display Screen and preparation is not possible. If this message is displayed, press the OK button and contact your Canon dealer for assistance. Maintenance > Other Maintenance > Preparing to Transfer the Printer iPF82511 838
8. Open the Ink Tank Cover. 9. Lift the stopper (a) of the Ink Tank Lock Lever (a). Lift the Ink Tank Lock Lever until it stops, and then push it down to the front. 10. Remove the Ink Tank. Maintenance > Other Maintenance > iPF825 Preparing to Transfer the Printer 11 839
Note • Store the Ink Tank you removed in the box with the ink holes (a) facing up. Otherwise, ink may leak and cause stains. 11. Repeat steps 9 and 10 to remove all ink tanks. 12. Push down the release lever (a) as shown as you gently return all ink tank lock levers to the original position. 13. Close the Ink Tank Cover. Maintenance > Other Maintenance > Preparing to Transfer the Printer iPF82511 840
At this point, ink is drawn out from inside the tubes. Important • Do not remove the Maintenance Cartridge during this process. When the process is finished, " Finished preparing to move printer. Turn off printer. " is displayed. 14. Press the Power button and turn off the printer. Important • Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the InkTank, wait until the printer comes online, and follow this procedure again. 15. Disconnect the printer power cord and interface cable, as well as the Roll Unit power cord. 16. Open the Top Cover, grasp the Belt, insert it between the Belt Stopper, and affix the Belt Stopper with a hex screw at the position indicated. Maintenance > Other Maintenance > iPF825 Preparing to Transfer the Printer 11 841
Important • Here, the Belt Stopper is the one that was removed and stored after initial installation. Neglecting to attach the Belt Stopper may damage the printer. • Do not touch the Linear Scale (a), Carriage Shaft (b), or Ink Tube Stabilizer (c). Touching these parts may damage them. 17. Close the Top Cover. 18. Tape down printer covers to secure them, in the reverse order of tape removal during installation. 19. Remove the Stand by reversing the installation procedure, when it was attached to the printer. 20. Disassemble and repackage the Stand by following the installation procedure in reverse. 21. Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a shipping box. Maintenance > Other Maintenance > Preparing to Transfer the Printer iPF82511 842
Updating the Firmware Update the printer firmware to take advantage of new and improved printer functions. Confirming the firmware version 1. Press the Menu button to display MAIN MENU. 2. Press ▲ or ▼ to select Information, and then press ▶. 3. Press ▲ or ▼ to select System Info, and then press the OK button. The firmware version is displayed. Updating the Firmware To obtain the latest firmware, visit the Canon website. If the firmware available online is newer than the installed firmware, update the printer firmware. For details on downloading and updating the firmware, visit the Canon website. Maintenance > Other Maintenance > iPF825 Updating the Firmware 11 843
Troubleshooting Frequently Asked Questions 845Problems Regarding Paper 847Printing does not start 858The printer stops during a print job 860Problems with the printing quality 861Cannot print over a network 873Installation problems 875HP-GL/2 problems 877Other problems 879Troubleshooting > iPF82512 844