Canon Imageprograf Ipf825 User Guide
Have a look at the manual Canon Imageprograf Ipf825 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
6. At this point, open the Maintenance Cartridge Cover. 7. Hold the used Maintenance Cartridge by the grip (a) with one hand and put your other hand under the Maintenance Cartridge to hold it firmly on the bottom, keeping it level as you pull it out. Important • Used maintenance cartridges are heavy. Always grasp the cartridge firmly and keep the cartridge lev- el during removal and storage. If you drop a used Maintenance Cartridge or store it at an angle, ink may leak and cause stains. • The remaining Maintenance Cartridge capacity is recorded on each printer. Do not install a used Maintenance Cartridge in another printer. Maintenance > Maintenance Cartridge > iPF825 Replacing the Maintenance Cartridge 11 825
8. Open the box, remove the plastic bag, packaging material, and Shaft Cleaner (a), and then take out the Maintenance Cartridge (b). Important • Never touch the metal contacts (a). This may damage the Maintenance Cartridge. 9. Keep the used Maintenance Cartridge level as you put it in the plastic bag. Expel excess air from the plastic bag and seal the zipper. Maintenance > Maintenance Cartridge > Replacing the Maintenance Cartridge iPF82511 826
10. Confirm the Maintenance Cartridge is right-side up, put it in the box with the packaging material attached, and store it so that it stays level. Important • Always put the used Maintenance Cartridge back in the box and store the box on a flat surface. Other- wise, ink may leak and cause stains. • In accordance with corporate environmental protection policies, Canon collects used maintenance cartridges. Follow the instructions provided with the new Maintenance Cartridge that describe how to process the used Maintenance Cartridge. 11. Wipe away any soiling on the Maintenance Cartridge Cover. Important • Support the Maintenance Cartridge Cover from underneath as you wipe it. Maintenance > Maintenance Cartridge > iPF825 Replacing the Maintenance Cartridge 11 827
12. Keeping the new Maintenance Cartridge level, insert it all the way in. 13. Close the Maintenance Cartridge Cover. 14. Press the OK button. The printer now initializes the Maintenance Cartridge. Next, replace the Shaft Cleaner. Replacing the Shaft Cleaner Replace the Shaft Cleaner when you replace the Maintenance Cartridge. New Shaft Cleaner is included with replacement Maintenance Cartridge. Maintenance > Maintenance Cartridge > Replacing the Maintenance Cartridge iPF82511 828
After you execute Repl. maint cart and replace the Maintenance Cartridge, a message will appear on the Display Screen requesting you to replace the Shaft Cleaner. Select Yes and press the OK button. Next, go to step 4. 1. Press the Menu button to display MAIN MENU.2. Press ▲ or ▼ to select Maintenance, and then press the ▶ button. 3. Press ▲ or ▼ to select Repl. S. Cleaner, and then press the ▶ button. 4. Press ▲ or ▼ to select Yes, and then press the OK button. After the Carriage is moved, the Display Screen indicates " Open Upper Cover".Note • If you do not respond within two minutes, shaft cleaner replacement is canceled and the printer goes online automatically. In this case, repeat the procedure. 5. Open the Top Cover. Note • Do not open the Printhead Fixer Lever toward the front. Accidentally opening the Printhead Fixer Lever toward the front will draw out ink, which consumes ink. Maintenance > Maintenance Cartridge > iPF825 Replacing the Maintenance Cartridge 11 829
6. Hold the Shaft Cleaner on the right side of the Carriage by the grips (a) and pull it toward you to remove it. Important • Do not touch the Linear Scale (a), Carriage Shaft (b), or Ink Tube Stabilizer (c). Touching these parts may damage them. 7. After removing the cap of the new Shaft Cleaner, hold it by the grips (a) and attach it to the Carriage. Push the Shaft Cleaner until it clicks into place. Maintenance > Maintenance Cartridge > Replacing the Maintenance Cartridge iPF82511 830
Note • Attach the cap from the new Shaft Cleaner on the used one. Be sure to put the used Shaft Cleaner in the small box before putting it in the larger box with the used Maintenance Cartridge for disposal. 8. Close the Top Cover. The Carriage is moved, and the printer goes online. Checking the Remaining Maintenance Cartridge Capacity The Maintenance Cartridge absorbs excess ink from borderless printing, printhead cleaning, and other processes. You can confirm the remaining capacity of the Maintenance Cartridge by checking the Maintenance Cartridge capacity shown on the Display Screen. Press the Information button to display the remaining capacity of the Maintenance Cartridge on the Display Screen. If the Display Screen indicates to replace the Maintenance Cartridge, replace the Maintenance Cartridge. If a message is displayed indicating to check the remaining capacity of the Maintenance Cartridge, or before tasks that deplete much of the capacity such as head cleaning or preparations to move the printer, check the remaining Maintenance Cartridge capacity and replace the Maintenance Cartridge as needed. (See "Replacing the Maintenance Cartridge .") →P.823 When to Replace the Maintenance Cartridge Replace or prepare to replace the Maintenance Cartridge in the following situations. Maintenance > Maintenance Cartridge > iPF825 Checking the Remaining Maintenance Cartridge Capacity 11 831
If a message for checking the Maintenance Cartridge is shown on the Display Screen When the Maintenance Cartridge capacity is low, the Message lamp is lit and " Prepare for maint cart replacement." is displayed. You can continue to print, but check the remaining Maintenance Cartridge capacity and prepare to replace the Maintenance Cartridge with a new one. (See "Checking the Remaining Maintenance Cartridge Capacity .") →P.831 When much of the Maintenance Cartridge capacity is depleted Printhead cleaning, Printhead replacement, and preparations to transfer the printer deplete much of the Maintenance Car- tridge capacity. (In particular, preparing to move the printer depletes a lot of the capacity.) To check the remaining Maintenance Cartridge capacity, press the Information button. Replace the Maintenance Cartridge and perform related maintenance as needed. If a message for the Maintenance Cartridge replacement is shown on the Display Screen When the Maintenance Cartridge is full, the Message lamp flashes and a message to replace the Maintenance Cartridge is shown on the Display Screen. Printing is disabled, and you cannot replace the Printhead or transfer the printer. Replace the Maintenance Cartridge with a new one. Maintenance > Maintenance Cartridge > When to Replace the Maintenance Cartridge iPF82511 832
Cleaning the Printer Cleaning the Printer Exterior ........................................................................................................................... 833 Cleaning Inside the Top Cover ........................................................................................................................ 833 Cleaning the Printer Exterior Clean the printer regularly to maintain better printing quality and help prevent problems. About once a month, clean the printer exterior. 1. Turn the printer off. (See "Turning the Printer On and Off.") →P.702 2. Unplug the power cord from the outlet. Caution • Always turn off the printer and unplug the power cord before cleaning or maintenance. Accidentally leaving the printer on poses a risk of injury if you touch moving parts inside the printer. 3. Using a damp cloth that you have wrung out completely, wipe away any dirt or paper dust from the Paper Feed Slot (a), power cord plug, and so on. Dry these parts with a dry cloth. Caution • Never use flammable solvents such as alcohol, benzene, or thinner. If these substances come into con- tact with electrical components inside the printer, there is a risk of fire or electrical shock. Important • If the Ejection Guide is dirty, it may soil the edge of the paper when the paper is cut. We recommend cleaning the Ejection Guide even if it does not appear dirty, because it may actually be covered withpaper dust. (See "Cleaning Inside the Top Cover .") →P.833 4. Plug the power cord into the outlet. Cleaning Inside the Top Cover Clean inside the Top Cover to maintain better printing quality and help prevent problems. Also clean inside the Top Cover in the following situations to ensure optimal operation. • If the printed surface or the underside of paper is dirty after printing • After you have used up a roll Maintenance > Cleaning the Printer > iPF825 Cleaning the Printer Exterior 11 833
• After borderless printing • After printing on small paper • After printing on paper that generates a lot of cutting debris • If you have replaced the roll • After printing on paper that generates a lot of paper dust • If the message "Blue platen switch is dirty. " is displayedImportant • If the Platen inside the Top Cover becomes dirty, it may soil the underside of paper. We recommend cleaning the Platen after borderless printing or printing on small paper. • If the Ejection Guide is dirty, it may soil the edge of the paper when the paper is cut. We recommend clean- ing the Ejection Guide even if it does not appear dirty, because it may actually be covered with paper dust. 1. Open the Top Cover. 2. If paper dust has accumulated in the Vacuum holes (a) on the Platen or in the Borderless Printing Ink Grooves (b), use the Cleaning Brush (c) provided with the printer to wipe it away. Maintenance > Cleaning the Printer > Cleaning Inside the Top Cover iPF82511 834