Canon Imageprograf Ipf825 User Guide
Have a look at the manual Canon Imageprograf Ipf825 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
3. Hold the Ink Tank by the handle (a) and remove it. Press the OK button.Caution • If there is still ink in the Ink Tank you removed, store it in the box with the ink holes (a) facing up. Otherwise, ink may leak and cause stains. Note • Dispose of used ink tanks according to local regulations. Maintenance > Ink Tanks > iPF825 Replacing Ink Tanks 11 805
Load the ink tank (330 ml) 1. Before opening the pouch, tilt the Ink Tank to the left and right gently seven or eight times. Important • If you do not agitate the Ink Tank, the ink may sediment, which may affect printing quality. 2. Open the pouch and remove the Ink Tank. Important • Never touch the ink holes or electrical contacts. This may cause stains, damage the Ink Tank, and affect printing quality. • Do not remove and agitate ink tanks that have already been installed in the printer. Ink may leak out. Maintenance > Ink Tanks > Replacing Ink Tanks iPF82511 806
3. Press the OK button and insert the Ink Tank into the holder with the ink holes facing down, as shown. Note • Ink tanks cannot be loaded in the holder if the color or orientation is incorrect. If the Ink Tank does not fit in the holder, do not force it into the holder. Make sure the color of the Ink Tank Lock Lever matches the color of the Ink Tank, and check the orientation of the Ink Tank before reloading it. 4. Lift the Ink Tank Lock Lever until it stops, and then push it down until it clicks into place. 5. Make sure the Ink Lamp is lit in red. Maintenance > Ink Tanks > iPF825 Replacing Ink Tanks 11 807
Note • If the Ink Lamp is not lit in red, reload the tank. 6. Close the Ink Tank Cover. The printer will go online or offline. Load the ink tank (700 ml) 1. Before opening the pouch, hold the new Ink Tank with both hands and tilt it to the left and right as shown, shaking gently it seven or eight times. Important • If you do not agitate the Ink Tank, the ink may sediment, which may affect printing quality. Maintenance > Ink Tanks > Replacing Ink Tanks iPF82511 808
2. Open the pouch and remove the Ink Tank. Important • Never touch the ink holes or electrical contacts. This may cause stains, damage the Ink Tank, and affect printing quality. • Do not remove and agitate ink tanks that have already been installed in the printer. Ink may leak out. 3. Press the OK button and insert the Ink Tank into the holder with the ink holes facing down, as shown. Note • Ink tanks cannot be loaded in the holder if the color or orientation is incorrect. If the Ink Tank does not fit in the holder, do not force it into the holder. Make sure the color of the Ink Tank Lock Lever matches the color of the Ink Tank, and check the orientation of the Ink Tank before reloading it. Maintenance > Ink Tanks > iPF825 Replacing Ink Tanks 11 809
4. Lift the Ink Tank Lock Lever until it stops, and then push it down until it clicks into place. 5. Make sure the Ink Lamp is lit in red. Note • If the Ink Lamp is not lit in red, reload the tank. 6. Close the Ink Tank Cover. The printer will go online or offline. Maintenance > Ink Tanks > Replacing Ink Tanks iPF82511 810
Checking Ink Tank Levels On the Display Screen, you can check how much ink is left in the Ink Tank. The Display Screen indicates the remaining ink levels, unless an error message is displayed. During error messages, press the Information button to view the ink levels on the Display Screen.These levels shown on the Display Screen correspond to the inks identified by the Color Label on the bottom of the Display Screen. These symbols may be displayed above the ink level: ! if ink is low, × if no ink is left, and ? if you have deactivated ink level detection. The remaining ink level is indicated as shown below. If the Display Screen indicates to replace the Ink Tank, replace the Ink Tank. If a message is displayed indicating to check the remaining ink levels, or after tasks that consume a lot of ink such as large-format printing or head cleaning, check the remaining levels and replace Ink Tank as needed. (See "Replacing Ink Tanks.") →P.799 When to Replace Ink Tanks Replace or prepare to replace Ink Tank in the following situations. Maintenance > Ink Tanks > iPF825 Checking Ink Tank Levels 11 811
If a message for checking the ink is shown on the Display Screen When there is little ink left, the Message lamp is lit and " Ink Level: Check" is shown on the Display Screen. You can continue to print, but prepare to replace the Ink Tank. (See "Checking Ink Tank Levels.") →P.811 Before print jobs and maintenance that consume a lot of ink If little ink is left, there may not be enough for large-format printing, head cleaning, and maintenance, which require a lot of ink. In this case, replace or prepare to replace the Ink Tank before maintenance. If a message for ink replacement is shown on the Display Screen When ink runs out, the Message lamp flashes, a message regarding Ink Tank replacement is shown on the Display Screen, and printing is disabled. Replace the Ink Tank at this point. Maintenance > Ink Tanks > When to Replace Ink Tanks iPF82511 812
Printheads Printhead ......................................................................................................................................................... 813 Checking for Nozzle Clogging ......................................................................................................................... 813 Cleaning the Printhead .................................................................................................................................... 815 Replacing the Printhead .................................................................................................................................. 816Printhead This is a replacement Printhead for the printer. •Printhead PF-03 Note • For instructions on replacing the Printhead, see "Replacing the Printhead." →P.816 Checking for Nozzle Clogging If printing is faint or streaked in different colors, make sure the Printhead nozzles are clear by printing a test pattern to check the nozzles. Note • You can specify a number of pages in the printer's Noz. Check Freq. menu for automatic nozzle checking every time you finish printing that quantity. (See "Main Menu Settings.") →P.730 1. Load unused paper. •Attaching the Roll Holder to Rolls →P.629 • Loading Rolls in the Printer →P.634 • Loading Sheets in the Printer →P.664Maintenance > Printheads > iPF825 Printhead 11 813
2. Press the Menu button to display MAIN MENU.3. Press ▲ or ▼ to select Test Print , and then press the ▶ button. 4. Press ▲ or ▼ to select Nozzle Check, and then press the ▶ button. 5. Press ▲ or ▼ to select Yes, and then press the OK button. The printer goes online and prints a test pattern. 6. Check the printing results. The Printhead L prints the test pattern for nozzle checking on the top line in each color, and the Printhead R prints the test pattern on the bottom line. If the horizontal lines are not faint or incomplete, the nozzles are clear. If some sections of the horizontal lines are faint or incomplete, the nozzles for those colors are clogged. If horizontal lines are faint or incomplete, follow the steps below and check again for nozzle clogging. 1. Clean the Printhead. (See "Cleaning the Printhead .") →P.815 2. Print a test pattern to check the nozzles. Note • If you repeat these steps several times but the horizontal lines are still faint or incomplete, contact your Canon dealer. Maintenance > Printheads > Checking for Nozzle Clogging iPF82511 814