Canon Imageprograf Ipf825 User Guide
Have a look at the manual Canon Imageprograf Ipf825 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1. This sets the BFormat for and CPaper Size. Note • The configuration method varies depending on the OS and application software you are using. If Page Setup is displayed in the application menu, the settings are configured by opening the Page Attributes dialog box from Page Setup. If it is not displayed, the settings are configured in the upper part of the printer driver displayed when you select Print from the application software menu. 2. Select the printer in the APrinter list. 3. In the FPaper Size list, click the size of the original. In this case, click ISO A4. 4. In DOrientation , click the icon of the document in landscape orientation. 5. If you configured the settings using the Page Attributes dialog box, click FOK to close the dialog box, and then select Print from the application software menu. Enhanced Printing Options > Other useful settings > iPF825 Making the Original Orientation Match the Paper Orientation (Mac OS X) 3 195
6. Access the Main pane.7. In the AMedia Type list, select the type of paper that is loaded. In this case, click Plain Paper. 8. Make your selection in the EPrint Target list. 9. Make your selection in the FPrint Quality list. 10. Access the Page Setup pane. 11. Select and click a roll paper in the APaper Source list. Enhanced Printing Options > Other useful settings > Making the Original Orientation Match the Paper Orientation (Mac OS X) iPF8253 196
12. Make sure the width of the loaded roll is displayed in the BRoll Width list—in this case, ISO A2/A3 (420.0mm). Note • If the width of the roll loaded in the printer is not shown in BRoll Width , click LPrinter Informa- tion on the Main pane to update the printer information. 13. Make sure the CPage Size setting matches the original size as selected in CPaper Size in the Page Attributes dialog box—in this case, ISO A4.14. Confirm the print settings, and then click MPrint to start printing. Note • For tips on confirming print settings, see " Confirming Print Settings (Mac OS X) →P.435 " Enhanced Printing Options > Other useful settings > iPF825 Making the Original Orientation Match the Paper Orientation (Mac OS X) 3 197
Using Favorites You can register print settings as Favorites to reuse settings from a particular job that met your expectations, or settings for a particular page size that you will use repeatedly. Favorites Registering a favorite for later use. You can choose the settings you have registered from a list before printing, and you can check the settings details. Note • You can also save the favorite settings as files. Using these files is a convenient way to print under the same conditions on another computer. (In Windows.) For instructions on using favorites to print, refer to the following topics, as appropriate for your computer and operating system. •Using Favorites (Windows) →P.214 • Using Favorites (Mac OS X) →P.438 Cutting Roll Paper After Printing Roll paper can be automatically cut after printing. Note • It may not be possible to cut certain types of paper, such as adhesive paper. For details on types of paper that cannot be used with the auto cut feature, see the Paper Reference Guide. (See " Types of Paper →P.623 ") Automatic Cutting Roll paper is cut automatically after printing. If you prefer, you can print continuously without cutting the roll, or you can print a cut line. For instructions on cutting roll paper after printing, refer to the following topics, as appropriate for your computer and oper- ating system. •Cutting Roll Paper After Printing (Windows) →P.198 • Cutting Roll Paper After Printing (Mac OS X) →P.200 Cutting Roll Paper After Printing (Windows) This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to print a cut line for manual cutting. Note • The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the steps below to reactivate the function if it is disabled, or to select the setting for printing a cut line instead. 1. Choose Print in the application menu. 2. Select the printer in the dialog box, and then display the printer driver dialog box.(See " Accessing the Printer Driv- er Dialog Box from Applications (Windows) →P.216 ") Enhanced Printing Options > Other useful settings > Using Favorites iPF8253 198
3. Click the Page Setup tab to display the Page Setup sheet.4. Select and click a roll paper in the LPaper Source list. 5. Click NRoll Paper Options to display the Roll Paper Options dialog box.6. To enable automatic cutting, click Yes in the AAutomatic Cutting list. If you prefer to cut the paper later yourself, click Print Cut Guideline . 7. Click OK to close the Roll Paper Options dialog box. 8. Confirm the print settings and print as desired. Note • For tips on confirming print settings, see " Confirming Print Settings (Windows) →P.211 " Roll paper will be automatically cut after printing. Enhanced Printing Options > Other useful settings > iPF825 Cutting Roll Paper After Printing (Windows) 3 199
Cutting Roll Paper After Printing (Mac OS X) This topic describes how to cut roll paper automatically after printing (using the auto cut function), as well as how to print a cut line for manual cutting. Note • The auto cut function is activated on the printer by default and when the printer driver is installed. Follow the steps below to reactivate the function if it is disabled, or to select the setting for printing a cut line instead. 1. This sets the BFormat for and CPaper Size. Note • The configuration method varies depending on the OS and application software you are using. If Page Setup is displayed in the application menu, the settings are configured by opening the Page Attributes dialog box from Page Setup. If it is not displayed, the settings are configured in the upper part of the printer driver displayed when you select Print from the application software menu. 2. Select the printer in the APrinter list. 3. Choose the original size in the CPaper Size list. 4. If you configured the settings using the Page Attributes dialog box, click FOK to close the dialog box, and then select Print from the application software menu. Enhanced Printing Options > Other useful settings > Cutting Roll Paper After Printing (Mac OS X) iPF8253 200
5. Access the Page Setup pane. 6. Select and click a roll paper in the APaper Source list. 7. Access the Main pane. 8. In the AMedia Type list, select the type of paper that is loaded. Enhanced Printing Options > Other useful settings > iPF825 Cutting Roll Paper After Printing (Mac OS X) 3 201
9. Click CSet to display the Paper Detailed Settings dialog box.10. To enable automatic cutting, click Printer Default in the HAutomatic Cutting list. If you prefer to cut the paper later yourself, click Print Cut Guideline. Important • If the automatic cut function has been deactivated on the printer, change the auto cut setting on the printer Control Panel. 11. Click OK to close the Paper Detailed Settings dialog box. 12. Confirm the print settings, and then click MPrint to start printing. Note • For tips on confirming print settings, see " Confirming Print Settings (Mac OS X) →P.435 " Switching the Paper Source of Roll Paper to Match the Paper Size You can configure the settings to print by automatically switching between roll 1 and roll 2 depending on the paper size being printed. Because the roll paper that produces the smallest margin upon printing is automatically selected, you can economize on paper. Important • This function is only supported in Windows. 1. Click start > Printers and Faxes (or Printers ). Enhanced Printing Options > Other useful settings > Switching the Paper Source of Roll Paper to Match the Paper Size iPF8253 202
2. Select the printer, and then display the printer properties dialog box. 3. Click the Device Settings tab to display the Device Settings sheet. 4. Select the AAutomatically switch paper sources (paper size priority) check box. 5. Click CAcquire Status. The paper size information is acquired from the printer, and the width of the roll paper that is actually loaded in the printer is displayed. Enhanced Printing Options > Other useful settings > iPF825 Switching the Paper Source of Roll Paper to Match the Paper Size 3 203
6. Click OK to close the dialog box. 7. Choose Print in the application menu. 8. Select the printer in the dialog box, and then display the printer driver dialog box. (See " Accessing the Printer Driv- er Dialog Box from Applications (Windows) →P.216 ") 9. Click the Page Setup tab to display the Page Setup sheet.10. Click Roll Paper (Auto) in the LPaper Source list. 11. Select the KRotate Page 90 degrees (Conserve Paper) check box as necessary.Note • When Rotate Page 90 degrees (Conserve Paper) is turned on, even more paper can be conserved depending on the paper size because pages created in portrait can be printed in landscape. (Refer to " Conserving Roll Paper by Rotating Originals 90 Degrees (Windows) →P.169 " for details on Rotate Page 90 degrees (Conserve Paper).) Enhanced Printing Options > Other useful settings > Switching the Paper Source of Roll Paper to Match the Paper Size iPF8253 204