Canon Imageprograf Ipf825 User Guide

							First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level Interface
Setup
(*13
→P.729
) Ethernet
Driver
(*13
→P.729
) MAC Ad-
dress
(*13 →P.729
) 000085XXXXXX Return
Defaults
(*14
→P.729
) No *
Yes Mainte-
nance Repl.
maint cart
No
Yes Replace
P.head
No
Yes Repl. S.
Cleaner
No
Yes Move
Printer
Level 1 *
Level 2
Level 3 System
Setup Warning Buzzer Off
On * Detect
Mismatch
Pause
Warning
None * Skip
Take-Up
Err
(*9
→P.729
) Off *
On Keep Pa-
per Size
Off *
On Paper Size
Basis Sht Selec-
tion 1
ISO A3+ *
13"x19"(Super B) Sht Selec-
tion 2
ISO B1
28"x40" (ANSI F) Roll
Switching
Use Optimal Size *
No RollSwitching TrimEdge
Reload
Automatic
Off *
On Printer Parts > Control Panel >
iPF825
Menu Structure 9
725
 
						

							First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level System
Setup
Noz.
Check
Freq.
Off
1 page
10 pages
Automatic * Carria-
geS-
canWdth
Automatic *
Fixed Sleep Tim-
er
(*15
→P.729
) 5 min. *
10 min.
15 min.
20 min.
30 min.
40 min.
50 min.
60 min.
240 min. Length
Unit
meter *
feet/inch Time Zone
(*13
→P.729
) 0:London (GMT)
+1:Paris,Rome
+2:Athens,Cairo
+3:Moscow
+4:Eerevan,Baku
+5:Islamabad
+6:Dacca
+7:Bangkok
+8:Hong Kong
+9:Tokyo,Seoul
+10:Canberra
+11NewCaledonia
+12:Wellington
-12:Eniwetok
-11:Midway is.
-10Hawaii(AHST)
-9:Alaska(AKST)
-8:Oregon (PST)
-7:Arizona(MST)
-6:Texas (CST) Printer Parts > Control Panel >
Menu Structure
iPF8259
726
 
						

							First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level System
Setup Time Zone
(*13
→P.729
) -5:NewYork(EST)
-4:Santiago
-3:Buenos Aires
-2:
-1:Cape Verde Date For-
mat
(*13
→P.729
) yyyy/mm/dd *
dd/mm/yyyy
mm/dd/yyyy Date &
Time
(*13
→P.729
) Date yyyy/mm/dd (*8 →P.729
)
Time hh:mm Language
*
Contrast
Adj.
–4,–3,–2,–1,0*,+1,+2,+3,+4 Reset
Papr-
Setngs
(*13
→P.729
) No
Yes Erase
HDD Data High
Speed
(*13
→P.729
) No
Yes Secure
High Spd.
(*13
→P.729
) No
Yes Printer Parts > Control Panel >
iPF825
Menu Structure 9
727
 
						

							First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level System
Setup Erase
HDD Data
Secure
(*13
→P.729
) No
Yes Output
Method
Print *
Print (Auto Del)
Save: Box XX Save and
Print
Off *
On Save:
Shared
Box
(*13
→P.729
) Off
On * Show Job
Log
(*13
→P.729
) Off
On *
Admin.
Menu
(*13 →P.729
) Change Password (*14 →P.729
)
Init.Admin.Pswd (*14 →P.729
) Test Print Status
Print
No
Yes Paper De-
tails
No
Yes Print Job
Log
No
Yes Menu
Map
No
Yes Nozzle
Check
No
Yes Color Pa-
lette
No
Yes Informa-
tion
System Info Error Log
1:xxxxxxxx-xxxx
2:xxxxxxxx-xxxx *1:  Available only if a roll is loaded.
*2:  Available only if 
ManageRemainRoll is On.
*3:  Available if  Feed Priority is Automatic or Print Length .
Printer Parts > Control Panel >
Menu Structure
iPF8259
728
 
						

							*4:  Not displayed if 
IP Mode is Manual.
*5:  For information on the types of paper the printer supports, refer to the Paper Reference Guide.   (See "Types of
Paper.") →P.623
 The paper type setting in the printer driver and related software (as well as on the Control
Panel ) is updated when you install the printer driver from the User Software CD-ROM or if you change paper
information by using the Media Configuration Tool.See the  Media Configuration Tool →P.412
 or Media
Configuration Tool →P.545
.
*6:  Not displayed if NetWare  is Off.
*7:  Not displayed if Auto Detect is On.
*8:  Follows the setting in  Date Format.
*9:  Available after you have used  Advanced Adj. in Auto Head Adj.  once.
*10:  Not displayed if IP Mode  is Automatic.
*11:  Follows the setting in  Length Unit.
*12:  Leading edge is not available as a setting option in the  Paper Detailed Settings dialog box of the printer driv-
er.
*13:  Viewing and configuration is possible for administrators, and only viewing for other users.
*14:  Viewing and configuration is possible for administrators only.
*15:  Default setting for the time to enter the power save mode/Sleep mode is recommended. Caution
• Only the following menus are displayed during printing.
Choose this menu to display  Head Cleaning, Fine Band Adj., and Information.
Choose this menu to display  Job Management.Submenus
Each time you press the 
Information button on the Control Panel, printer information is displayed in the following order.
• The remaining Maintenance Cartridge capacity and ink levels •
Information on the loaded paper Printer Parts > Control Panel >
iPF825
Menu Structure 9
729
 
						

							•
Printer information •
HP-GL/2 settings information For details on submenu screens, 
see "Submenu Display." →P.743
Main menu during printing
The structure of the main menu during printing is as follows.
For instructions on menu operations, 
see "Main Menu Operations." →P.713
For details on menu items available during printing,  see "Main Menu Settings (During Printing)." →P.742
First Level Second Level Third Level Fourth Level
Menu Durng Prtng Head Cleaning *
Head Cleaning A *
Head Cleaning B
Fine Band Adj. From –5 to 5 Information System Info
Error Log
1:xxxxxxxx-xxxx
2:xxxxxxxx-xxxxMain Menu Settings
Main menu items are described in the following tables.
For instructions on selecting or setting menu items, 
see "Main Menu Operations ." →P.713
.
For details on menu levels and values,  see "Menu Structure." →P.717
Setting Item
Description, Instructions
Paper Cutting This command is available only if a roll is loaded.
Choose Yes to cut the roll at the current position. However, if paper cannot be advanced
to the cut position, it will not be cut. In this case, manually advance the roll before cutting
it.  (See "Feeding Roll Paper Manually .") →P.650
Rep. Ink Tank When replacing ink tanks, choose  Yes and follow the instructions on the screen.   (See
"Replacing Ink Tanks .") →P.799Printer Parts > Control Panel >
Main Menu Settings
iPF8259
730
 
						

							Setting Item
Description, Instructions
Head Cleaning Clean the Printhead.  (See "Cleaning the Printhead .") →P.815
Choose Head Cleaning A if printing is faint, oddly colored, or contains foreign substan-
ces.
Choose Head Cleaning B if no ink is printed at all, or if printing is not improved by
Head Cleaning A.
Paper Menu Specify the type and size of paper.   (See " Paper Menu .") →P.732
Paper Details Specify detailed paper-related settings, including the ink drying time and borderless print-
ing options.  (See " Paper Details .") →P.732
Job Management Manage print jobs on the printer's hard disk.   (See " Job Management .") →P.734
GL2 Settings Specify settings for HP-GL/2 printing.   (See " GL2 Settings .") →P.735
Adjust Printer Adjust the Printhead alignment or amount of feed by printing a test pattern.   (See " Adjust
Printer .") →P.738
Interface Setup Configure the EOP timer and network settings.   (See " Interface Setup .") →P.738
Maintenance Access maintenance settings when replacing the Printhead or preparing to move the print-
er.  (See " Maintenance .") →P.739
System Setup Specify the printer system settings, including the date format and display language.   (See
"  
System Setup .") →P.740
Admin. Menu
Change PasswordBy setting a password, you can restrict menu display and
configuration as follows. You can input between 0 and
9999999.
• Viewing 

and  configuration  by  administrators
only
IP Setting
Return Defaults
Change Password
Init.Admin.Pswd
• Viewing  and  configuration  by  administrators,
and only viewing by other users
Interface  Setup  settings  (except  IP  Setting, Return
Defaults )
Time Zone
Date Format
Date & Time
Reset PaprSetngs
High Speed
Secure High Spd.
Secure
Save: Shared Box
Show Job Log
Admin. Menu
Init.Admin.Pswd Choose OK to restore the Admin. Menu password to the
default values.
Test Print Choose Status Print to print information about the printer.
Choose Paper Details to print the paper settings as specified in  Paper Details.
Choose Print Job Log to print a record of print jobs, including the paper type and size,
amount of ink used, and so on. (Information on ink consumption is general, not specific
in nature.) Printer Parts 
> Control Panel >
iPF825
Main Menu Settings 9
731
 
						

							Setting Item
Description, Instructions
Test Print Choose Menu Map to print a list of the main menu options.
Choose Nozzle Check to print a test pattern for checking the nozzles.
Select Color Palette to print the GL2 color palette.
Information Displays printer information and an error log.   (See " Information .") →P.742
Paper Menu
Setting Item
Description, Instructions
Cut Sheet Type (*1 →P.732
) Choose the type of sheets.
 (See "Selecting the Paper Type (Sheet) .") →P.663
Roll1(Uppr) Type (*1 →P.732
)
Roll2 (Lwr) Type (*1 →P.732
) Choose the type of roll.
 (See "Selecting the Paper Type (Roll) .") →P.642
Roll1(Uppr)Lngth
Roll2(Lwr) Lngth Displayed if ManageRemainRoll
 is On.
If a barcode is not printed on rolls, specify the roll length.
The roll length is displayed in meters or feet, depending
on the setting in  Length Unit.
Roll2 (Lwr) Type (*1 →P.732
) Choose the type of roll.
 (See "Selecting the Paper Type (Roll) .") →P.642
Roll2(Lwr) Lngth (*1 →P.732
) Displayed if ManageRemainRoll  is On.
If a barcode is not printed on rolls, specify the roll length.
The roll length is displayed in meters or feet, depending
on the setting in  Length Unit.
ManageRemainRoll Choose On to print a barcode at the end of a roll before
you remove it. The printed barcode can be used in manag-
ing the amount of roll paper left. Choose Off if you prefer
not to print the barcode.  (See "Keeping Track of the Amount of Roll Paper
Left.") →P.651
*1:  For information on the types of paper the printer supports, refer to the Paper Reference Guide. 
 (See "Types of
Paper.") →P.623
 The types of paper indicated in the printer driver and related software (as well as on the
Control Panel ) are updated when you install the printer driver from the User Software CD-ROM or if you up-
date paper information by using the Media Configuration Tool. See  Media Configuration Tool →P.412
 or
Media Configuration Tool →P.545
. Paper Details
Setting Item
Description, Instructions(The type of paper is dis-
played here.)
(*1
→P.734
) Roll DryingTime
Specify the time to wait for the ink to dry for each sheet.Printer Parts > Control Panel >
Main Menu Settings
iPF8259
732
 
						

							Setting Item
Description, Instructions(The type of paper is dis-
played here.)
(*1
→P.734
) Scan Wait Time
Specify the time to wait for the ink to dry between each
scan (after the printhead finishes moving in one direction),
in consideration of how quickly the ink dries. Also specify
the applicable area for the ink drying time. Select  Entire
area to apply the ink drying time after each scan until the
document is fully printed. Select  Leading edge to apply
the ink drying time after each scan only in the area 110–
160 mm from the leading edge. (The applicable length
varies depending on the  Print Quality setting.) Note that
printing will take longer if you specify the  Scan Wait
Time setting. In particular, when  Leading edge is selec-
ted, colors may be uneven in the boundary between the
areas with and without a drying time.
Feed Priority Specify exact paper feeding, if desired. Normally, select
Automatic. Choose Print Length if you prefer to feed the
paper an exact amount. However, note that choosing  Print
Length may result in slight banding in the direction of
Carriage scanning.
Adjust Length Displayed if Feed Priority is Print Length.
Adjustment relative to the amount of stretching or shrink-
age of the current paper.
Enter either the adjustment results from  Print Pattern or
the discrepancy that you measured (as a percentage).
For paper that tends to stretch, increase the feed amount
by choosing a higher adjustment value. For paper that
tends to shrink, decrease the feed amount by choosing a
lower adjustment value.
Head Height Adjust the Printhead height.  (See "Troubleshooting Pa-
per Abrasion and Blurry Images (Head Height) .") →P.683
Skew Check Lv. If you print on Japanese paper (washi) or other handmade
paper that has an irregular width, choose  Loose for a high-
er skew detection threshold, or choose  Off to disable skew
detection. However, if paper is loaded askew when detec-
tion is Off, note that paper jams or Platen soiling may oc-
cur.
VacuumStrngth Specify the level of suction that holds paper against the
Platen.  (See "Adjusting the Vacuum Strength (Vac-
uumStrngth) .") →P.691
Width Detection Specify this option to print inside boundaries or in other
cases when specifying a particular starting position for
printing. Paper width and skew are not detected if you se-
lect Off. If paper is loaded askew, note that paper jams or
Platen soiling may occur.
NearEnd RollMrgn Specify the minimum margin at the leading edge of roll
paper to ensure better printing quality at the leading edge.
Note that if you choose 3mm, it may lower the printing
quality at the leading edge and affect feeding accuracy.
The printed surface may be scratched, and ink may adhere
to the leading edge. It may also cause the Platen to be-
come soiled. Printer Parts > Control Panel >
iPF825
Main Menu Settings 9
733
 
						

							Setting Item
Description, Instructions(The type of paper is dis-
played here.)
(*1
→P.734
) Cut Speed
Choose the cutting speed. If you use adhesive paper,
choosing Slow helps prevent adhesive from sticking to the
cutter and keeps the cutter sharp.
Trim Edge First If a roll is loaded, the end of the paper will be cut.
Cutting Mode Specify whether or not to cut with the standard round-bla-
ded cutter.
Choose Automatic to have the roll cut automatically after
printing. If you choose Manual, the paper will not be cut
after printing. Instead, a line will be printed at the cut po-
sition.
Choose Eject if you prefer not to have documents dropped
immediately after printing, as when waiting for ink to dry.
Bordless Margin Adjust the margin during borderless printing.
Choose Automatic to have the printer automatically de-
tect the paper width and configure the margin settings for
borderless printing. If margins are mistakenly created
when Automatic is selected, choose  Fixed. In this case,
the paper width is not detected automatically, and the
document is printed without borders, using the margin set-
tings required by the printer.
CutDustReduct. If you choose On, a line will be printed at the cut position
when paper cutting is selected. This option reduces the
amount of debris given off after cutting. It also helps pre-
vent adhesive from sticking to the cutter and keeps the
cutter sharp if you use adhesive paper.   (See "Reducing
Dust from Cutting Rolls.") →P.660
NearEnd Sht Mrgn Specify a margin at the leading edge of sheets to ensure
better printing quality at the leading edge.
Note that if you choose  3mm, it may lower the printing
quality at the leading edge and affect feeding accuracy.
The printed surface may be scratched, and ink may adhere
to the leading edge.
Return Defaults Choose Yes to restore Paper Details  to the default values.*1:  For information on the types of paper the printer supports, refer to the Paper Reference Guide. 
 (See "Types of
Paper.") →P.623
 The types of paper indicated in the printer driver and related software (as well as on the
Control Panel ) are updated when you install the printer driver from the User Software CD-ROM or if you up-
date paper information by using the Media Configuration Tool. Job Management
Setting Item
Description, InstructionsPrint
Job Job
List (Choo
se a
print
job)
Delete
Delete the current job or queued jobs.   (See "Managing
Queued Jobs (Deleting or Preempting Other Jobs) .") →P.574
Preempt Jobs Print the job first after the current print job is finished.   (See
"Managing Queued Jobs (Deleting or Preempting Other
Jobs).") →P.574Printer Parts > Control Panel >
Main Menu Settings
iPF8259
734