Brother Mfc 8220 User Manual

							IMPORTANT INFORMATION   11 - 1
11
IEC 60825 Specification
This machine is a Class 1 laser product as defined in IEC 60825 
specifications. The label shown below is attached in countries where 
required.
This machine has a Class 3B Laser Diode which emits invisible laser 
radiation in the Scanner Unit. The Scanner Unit should not be 
opened under any circumstances.
Laser Diode
Wave length: 760 - 810 nm
Output: 5 mW max.
Laser Class: Class 3B
Caution
Use of controls, adjustments or performance of procedures other 
than those specified in this manual may result in hazardous radiation 
exposure.
Important information
CLASS  1  LASER  PRODUCT
APPAREIL  À  LASER  DE  CLASSE  1
LASER  KLASSE  1  PRODUKT
 
						

							11 - 2   IMPORTANT INFORMATION
Important Information for Australia
Important Safety Instructions
1Read all of these instructions.
2Save them for later reference.
3Follow all warnings and instructions marked on the product.
4Switch off before cleaning. Do not use liquid or aerosol cleaners. 
Use a damp cloth for cleaning.
5Do not place this product on an unstable surface, stand, or table. 
The product may fall, causing serious damage to the product.
6Slots and openings in the cabinet and the back or bottom are 
provided for ventilation; to ensure reliable operation of the 
product and to protect it from overheating, these openings must 
not be blocked or covered. The openings should never be 
blocked by placing the product on a bed, sofa, rug, or other 
similar surface. This product should never be placed near or 
over a radiator or heater. This product should not be placed in a 
built-in installation unless proper ventilation is provided.
7This product should be operated from the type of power source 
indicated on the label. If you are not sure of the type of power 
available, consult with your dealer or local power company.
8This product is equipped with a 3-wire earthed plug. This plug 
will fit into only an earthed socket. This is a safety feature. If you 
are unable to insert the plug into the outlet, contact your 
electrician to replace your obsolete socket. Do not defeat the 
purpose of an earthed plug.
9Do not allow anything to rest on the power cord. Do not locate 
this product where people can walk on the cord.
10Do not place anything in front of the MFC that will block received 
faxes. Do not place anything in the path of received faxes.
11Do not touch a document during printing.
 
						

							IMPORTANT INFORMATION   11 - 3
12Never push objects of any kind into this product through cabinet 
slots, since they may touch dangerous voltage points or short 
out parts resulting in a risk of fire or electric shock. Never spill 
liquid of any kind on the product.
13Do not attempt to service this product yourself, because 
opening or removing covers may expose you to dangerous 
voltage points and/or other risks. Refer all servicing to service 
personnel.
14Unplug this product from the mains power and telephone line 
sockets, and refer servicing to qualified Service Personnel 
under the following conditions:
■When the power cord is damaged or frayed.
■If liquid has been spilled into the product.
■If the product has been exposed to rain or water.
■If the product does not operate normally when the operating 
instructions are followed. Adjust only those controls that are 
covered by the operating instructions. Improper adjustment 
of other controls may result in damage and will often require 
extensive work by a qualified technician to restore the 
product to normal operation.
■If the product has been dropped or the cabinet has been 
damaged.
■If the product exhibits a distinct change in performance, 
indicating a need for service.
15To protect your product against power surges, we recommend 
the use of a power protection device (Surge Protector).
 
						

							11 - 4   IMPORTANT INFORMATION
IMPORTANT-For Your Safety
To ensure safe operation the three-pin plug supplied must be 
inserted only into a standard three-pin power point which is 
effectively grounded through the normal household wiring.
Extension cords used with the equipment must be three-conductor 
and be correctly wired to provide connection to ground. Incorrectly 
wired extension cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily does not imply 
that the power is grounded and that the installation is completely 
safe. For your safety, if in any doubt about the effective grounding of 
the power, consult a qualified electrician.
Disconnect device
This machine must be installed near a power outlet, which is easily 
accessible. In case of emergencies, you must disconnect the power 
cord from the power outlet in order to shut off power completely.
LAN Connection
Caution: Connect this product to the LAN connection which is not 
subjected to overvoltages.
ENERGY STAR® Compliance Statement
As an ENERGY STAR® Partner, Brother Industries, Ltd.
has determined that this product meets the E
NERGY STAR® guidelines 
for energy efficiency.
 
						

							IMPORTANT INFORMATION   11 - 5
Important Information for New Zealand
Important Safety Instructions
1Read all of these instructions.
2Save them for later reference.
3Follow all warnings and instructions marked on the product.
4Switch off before cleaning. Do not use liquid or aerosol cleaners. 
Use a damp cloth for cleaning.
5The grant of a Telepermit for any item of terminal equipment 
indicates only that Telecom has accepted that the item complies 
with minimum conditions for connection to its network. It 
indicates no endorsement of the product by Telecom, nor does 
it provide any sort of warranty. Above all, it provides no 
assurance that any item will work correctly in all respects with 
another item of Telepermitted equipment of a different make or 
model, nor does it imply that any product is compatible with all 
of Telecom’s network services.
6This equipment does not fully meet Telecom’s impedance 
requirements. Performance limitations may occur when used in 
conjunction with some parts of the network. Telecom will accept 
no responsibility should difficulties arise in such circumstances.
7If a charge for local calls is acceptable, the “Dial Button” should 
not be used for local calls. Only the 7-digits of the local number 
should be dialed from your telephone. Do not dial the area code 
digit or the “0” prefix.
8This equipment shall not be set to make automatic calls to the 
Telecom ‘111’ Emergency Service.
9This equipment should not be used under any circumstances 
which may constitute a nuisance to other Telecom customers.
10Not all telephones will respond to incoming ringing when 
connected to the extension socket.
11The answer delay setting of this equipment shall not be set to 
less than the default setting as this will destroy Caller ID 
information.
 
						

							11 - 6   IMPORTANT INFORMATION
12All persons using this device for recording telephone 
conversations shall comply with New Zealand law. This requires 
that at least one party to the conversation is to be aware that it 
is being recorded. In addition, the Principles enumerated in the 
Privacy Act 1993 shall be complied with in respect to the nature 
of the personal information collected, the purpose for its 
collection, how it is to be used and what it disclosed to any other 
party.
13The Caller ID Information is presented in the form: Area Code + 
Directory number
When dialing back, always insert a zero in front of the area code 
for a toll call and omit the area code for a local call, If a zero is 
inserted in front of the area code for a local call, the call will still 
proceed correctly but if the line has non-code access to another 
toll carrier, you should check with that carrier before inserting 
zero on a local call.
14Do not place this product on an unstable surface, stand, or table. 
The product may fall, causing serious damage to the product.
15Slots and openings in the cabinet and the back or bottom are 
provided for ventilation; to ensure reliable operation of the 
product and to protect it from overheating, these openings must 
not be blocked or covered. The openings should never be 
blocked by placing the product on a bed, sofa, rug, or other 
similar surface. This product should never be placed near or 
over a radiator or heater. This product should not be placed in a 
built-in installation unless proper ventilation is provided.
16This product should be operated from the type of power source 
indicated on the label. If you are not sure of the type of power 
available, consult with your dealer or local power company.
17This product is equipped with a 3-wire earthed plug. This plug 
will fit into only an earthed socket. This is a safety feature. If you 
are unable to insert the plug into the outlet, contact your 
electrician to replace your obsolete socket. Do not defeat the 
purpose of an earthed plug.
18Do not allow anything to rest on the power cord. Do not locate 
this product where people can walk on the cord.
19Do not place anything in front of the MFC that will block received 
faxes. Do not place anything in the path of received faxes.
 
						

							IMPORTANT INFORMATION   11 - 7
20Do not touch a document during printing.
21Never push objects of any kind into this product through cabinet 
slots, since they may touch dangerous voltage points or short 
out parts resulting in a risk of fire or electric shock. Never spill 
liquid of any kind on the product.
22Do not attempt to service this product yourself, because 
opening or removing covers may expose you to dangerous 
voltage points and/or other risks. Refer all servicing to service 
personnel.
23Unplug this product from the mains power and telephone line 
sockets, and refer servicing to qualified Service Personnel 
under the following conditions:
■If the power cord is damaged or frayed.
■If liquid has been spilled into the product.
■If the product has been exposed to rain or water.
■If the product does not operate normally when the operating 
instructions are followed. Adjust only those controls that are 
covered by the operating instructions. Improper adjustment 
of other controls may result in damage and will often require 
extensive work by a qualified technician to restore the 
product to normal operation.
■If the product has been dropped or the cabinet has been 
damaged.
■If the product exhibits a distinct change in performance, 
indicating a need for service.
24This unit will only work in conjunction with a tone signalling 
(DTMF) telephone, but some telephones are not compatible. 
Since noise or speech from the telephone can upset dialing from 
this unit, errors may result if the devices are used together in 
other than quiet conditions.
25Where it is necessary to dial prefix digits, such as a Caller 
Display override code (“0196” or “0197”), this unit will have to be 
used in conjunction with an associated tone signalling (DTMF) 
telephone.
 
						

							11 - 8   IMPORTANT INFORMATION
26Note that some telephones are not compatible with this unit and 
dialing errors may result if the two devices are used together in 
other than quiet conditions. The Telecom Faults Service is not 
to be called should such problems arise. In such cases, it is 
recommended that the prefix and wanted number are dialed 
manually.
27This equipment may not provide for the effective hand-over of a 
call to another device connected to the same line.
28Immediately disconnect this equipment should it become 
physically damaged, and arrange for its disposal or repair.
29Some parameters required for compliance with Telecom’s 
Telepermit requirements are dependent on the equipment (PC) 
associated with this device. The associated equipment shall be 
set to operate within the following limits for compliance with
Telecom’s Specifications:-
There shall be no more than 10 call attempts to the same 
number within any 30 minute period for any single manual call 
initiation, and,
The equipment shall go on-hook for a period of not less than 30 
seconds between the end of one attempt and the beginning of 
the next attempt.
30Some parameters required for compliance with Telecom’s 
Telepermit requirements are dependent on the equipment (PC) 
associated with this device. In order to operate within the limits 
for compliance with Telecom’s Specifications, the associated 
equipment shall be set to ensure that automatic calls to different 
numbers are spaced such that there is no less that 5 seconds 
between the end of one call attempt and the beginning of 
another.
31The call log incorporated in this equipment may not record all 
answered calls. The call log, therefore may not agree with the 
Telecom account.
32When using the Caller Line Identification incorporated in this 
device, verify the integrity of the recorded digits prior to dialing.
 
						

							IMPORTANT INFORMATION   11 - 9
IMPORTANT-For Your Safety
To ensure safe operation the three-pin plug supplied must be 
inserted only into a standard three-pin power point which is 
effectively grounded through the normal household wiring.
Extension cords used with the equipment must be three-conductor 
and be correctly wired to provide connection to ground. Incorrectly 
wired extension cords are a major cause of fatalities.
The fact that the equipment operates satisfactorily does not imply 
that the power is grounded and that the installation is completely 
safe. For your safety, if in any doubt about the effective grounding of 
the power, consult a qualified electrician.
Disconnect device
This machine must be installed near a power outlet, which is easily 
accessible. In case of emergencies, you must disconnect the power 
cord from the power outlet in order to shut off power completely.
LAN Connection
Caution: Connect this product to the LAN connection which is not 
subjected to overvoltages.
IMPORTANT NOTICE
Under power failure conditions, this fax may not operate. Please 
ensure that a separate telephone, not dependant on local power, is 
available for emergency use.
 
						

							11 - 10   IMPORTANT INFORMATION
Important Information for Some 
Countries
Important Safety Instructions
1Read all of these instructions.
2Save them for later reference.
3Follow all warnings and instructions marked on the product.
4Switch off before cleaning. Do not use liquid or aerosol cleaners. 
Use a damp cloth for cleaning.
5Do not place this product near water.
6Do not place this product on an unstable cart, stand, or table. 
The product may drop, causing serious damage to the product.
7Slots and openings in the cabinet and the back or bottom are 
provided for ventilation; to ensure reliable operation of the 
product and to protect it from overheating, these openings must 
not be blocked or covered. The openings should never be 
blocked by placing the product on a bed, sofa, rug, or other 
similar surface. This product should never be placed near or on 
a radiator or heater. This product should never be placed in a 
built-in installation unless proper ventilation is provided.
8This product should be operated from the type of power source 
indicated on the label. If you are not sure of the type of power 
available, consult with your dealer or local power company.
9This product is equipped with a 2-wire grounding type plug or a 
3-wire grounding type plug (Only for Singapore, Malaysia, Hong 
Kong and India), a plug having two or three pins. This plug will 
only fit into only a grounding-type power outlet. This is a safety 
feature. If you are unable to insert the plug into the outlet, 
contact your electrician to replace your obsolete outlet. Do not 
defeat the purpose of the grounding-type plug.
10Do not allow anything to rest on the power cord. Do not place 
this product where people can walk on the cord.
11If an extension cord is used with this product, make sure that the 
total ampere ratings on the products plugged into the extension 
cord do not exceed the extension cord ampere rating.