ATT Passageway For Partner Communications System User Guide

							AT&T
560-201-103
Issue 1
November 1993
PassageWay™ Solution
For PARTNER® Communications System
User’s Guide 
						

							Copyright © 1993 AT&T
All Rights Reserved
Printed in the USA
560-201-103
Issue 1
November 1993
NOTICE:
While reasonable effort was made to ensure that the information in this document
was complete and accurate at the time of printing, AT&T cannot assume
responsibility for any errors. Changes and/or corrections to the information
contained in this document may be incorporated into future issues. Check the
Readme file enclosed with the software to ensure you are aware of any last
minute modifications to this documentation.
FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
—
—
—
—Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the
equipment is connected.
Consult the dealer or an experienced radio/TV technician for help. 
						

							TRADEMARK NOTICE
PARTNER, MLS-34D, MLS-18D, MLS-12D, MLS-12, and MLS-6 are registered
trademarks of AT&T.
PassageWay is a trademark of AT&T.
Microsoft and MS-DOS are registered trademarks of Microsoft Corporation.
Windows is a trademark of Microsoft Corporation.
Hayes is a registered trademark of Hayes Microcomputer Products, Inc.
IBM and PS/2 are registered trademarks of International Business Machines
Corporation.
HP and LaserJet are registered trademarks of Hewlett-Packard Company.
SECURITY
As a customer of new telecommunications equipment, you should be aware of the
significant and growing problem of theft of long distance services by third parties,
known commonly as toll fraud. It is particularly important that you understand
and take appropriate steps to deal with this crime because under applicable tariffs,
you will be responsible for payment of associated toll charges. AT&T can not be
responsible for such charges and will not make any allowance or give any credit
resulting from toll fraud.
Toll fraud can occur despite the preventive efforts of network providers and
equipment manufacturers. Toll fraud is a potential risk for every customer with
telecommunications equipment having one or more of the following features: (1)
remote access, (2) automated attendant, (3) voice mail, (4) remote administration
and maintenance, and (5) call forwarding (remote). This is not a product or design
defect but a risk associated with equipment having one or more of the features
described above. If your new telecommunications equipment possesses any of
these features, please consult the relevant portion of your documentation for
further details and specific procedures to reduce the risk of toll fraud or contact
your AT&T dealer for further details. 
						

							ORDERING INFORMATION
To order copies of this manual:
Contact: Your AT&T Account Team or your AT&T Authorized Dealer.
or
Call:AT&T at 1-800-432-6600
or
Write:AT&T Customer Information Center
P.O. Box 19901
Indianapolis, IN 46219
Order:Document No. 560-201-103 
						

							Contents
1Introduction1-1
nWhat is PassageWay Solution?1-1
nUser Responsibilities1-3
nConventions Used in this Guide1-3
nGetting Help1-4
2Installing and Setting Up PassageWay Solution
nOverview
nPassageWay Components
nPassageWay Requirements
nlnstalling the PassageWay Adapter
2-1
2-1
2-2
2-5
nInstalling the PassageWay Software
nSetting Up AT&TBuzz
Setting the Run Mode Option
No Matching Mode
Match to AT&TCall File Mode
Export via Paste Link DDE Mode
Setting User Options
2-7
2-11
2-25
2-28
2-28
2-30
2-32
2-36
i 
						

							Contents
3Using AT&TBuzz
nOverview
n
n
n
n
nWhat is AT&TBuzz?
Using Caller ID Information
Running AT&TBuzz
Helpful Hints
Tasks
Accessing the Log Viewer
Answering a Call
ii
Changing the AT&TCall File Associated
with AT&TBuzz
Creating a New Card in the Associated
AT&TCall File
Exiting AT&TBuzz
Resetting the Size of the AT&TBuzz Window
Selecting a Call Record
Setting AT&TBuzz for Auto-Hold
Setting AT&TBuzz for Auto-Drop
Setting AT&TBuzz to Show the
Associated AT&TCall Card Automatically
Setting the AT&TBuzz Window to
Appear Automatically
Setting the Area Code3-1
3-1
3-2
3-7
3-10
3-10
3-11
3-11
3-11
3-13
3-13
3-14
3-14
3-14
3-15
3-15
3-16
3-17
3-17 
						

							Contents
Setting the AT&TBuzz Window to Always
be on Top of Other Windows
3-18
Setting Automatic Inspect Mode3-18
Setting the Run Mode for AT&TBuzz3-19
Setting AT&TBuzz to Log Incoming Calls3-20
Showing the Card of an Incoming Call
on Demand
3-21
Using the Timer3-21
n     AT&TBuzz Menu Bar Options3-23
4Using AT&TCall
nOverview
nWhat Is AT&TCall?
nGetting Started
nHelpful Hints
nRunning AT&TCall
nTasks
File Tasks
Accessing the Log Viewer
Changing How Cards are Sorted in an AT&TCall File
Creating a File Template
Creating a New AT&TCall File
Dialing a Phone Number with the Dialpad
4-1
4-1
4-2
4-10
4-37
4-38
4-38
4-38
4-39
4-39
4-40
4-41
4-41
iii 
						

							Contents
Exiting AT&TCall4-43
Exporting AT&TCall Information4-44
Importing Files into AT&TCall4-45
Opening an Existing AT&TCall File4-48
Printing a Card List4-49
Printing an AT&TCall File or Card4-50
Protecting an AT&TCall File with a Password4-53
Removing the Password from an AT&TCall File4-54
Saving an AT&TCall File4-55
Setting the Account Code Options4-55
Setting the AT&TCall Window To Always
Be on Top of Other Windows
4-56
Setting the Dial Options4-57
Specifying an AT&TCall File To Be Loaded Automatically4-58
Card Tasks
4-60
Accessing the Notes Field4-60
Changing the Field Labels in the Cards4-60
Creating a New Card4-61
Deleting a Card4-61
Dialing a Phone Number from a Card4-62
Editng an Existing Card4-63
Entering Telephone Numbers in a Card4-64
Hiding the Card Display4-65
iv 
						

							Contents
Selecting a Card
Showing the Card Display
Using the Timer
Quick Dial Tasks
Accessing Information for a Quick Dial
Assigning a Phone Number to a Quick Dial
Changing the Number of Quick Dials Displayed
Changing the Setup of the Quick Dial Labels
Dialing a Phone Number from a Quick Dial
Erasing a Quick Dial
Re-Assigning an Existing Quick Dial
n   AT&TCall Menu Bar Options
4-65
4-65
4-65
4-66
4-66
4-67
4-69
4-69
4-70
4-71
4-71
4-73
5Using AT&TSet
n   Overview
n   What Is AT&TSet?
System Administration Capabilities
n   Helpful Hints
n   Running AT&TSet
n   Extension Programming Tasks
Changing Button Labels
Converting a File to a Different Button
Configuration
5-1
5-1
5-2
5-7
5-8
5-9
5-12
5-12
5-13
v