Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

							FeaturesB
Button, Single-CO (S-CO)
DescriptionA Single-CO (S-CO) button is an outside line access button. This
allows 
the proprietary telephone user to access a specific line by
pressing a S-CO button. An incoming call can be directed to an 
S-
CO button.Conditions
l The default setting for CO buttons is changeable. (Flexible CO Button)
l An S-CO button provides outside line status.
l If Automatic Route Selection (ARS) is set, it is overridden by an
outgoing call made by pressing the S-CO button.
l Incoming calls appear on the proprietary telephone, when an extension
is assigned as the incoming call destination and a S-CO 
and/or L-CO
button is assigned.
l Immediate,, delayed, no ringing or no incoming call (disable) can be
selected on an extension-outside line basis.
l The digital PT user can choose a desired ringing tone type for the S-CO
button by System or Station Programming.
Programming References
Section 4, System Programming
[OOS] Flexible CO Button Assignment
[400] Outside Line Connection Assignment
[603]-[604]DIL 1 :N Extension and Delayed Ringing - Day / Night
[605]-[606]Outgoing Permitted Outside Line Assignment - Day / NightStation Programming
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .User Manual
Flexible CO Button Assignment 
- Single-CO (S-CO) Button
Ringing Tone Selection for CO Buttons
Feature ReferencesSection 3, Features
Answering, Direct Outside Line
LED Indication, Outside Line
Line Access, DirectLine Access, Individual
Ringing, Delayed
Ringing Tone Selection for CO
ButtonsOperation References Basic Operation
-User Manual
Making CallsReceiving Calls
DPT Features
Outward Dialing - Line Access, IndividualFeatures
3-21 
						

							BFeatures
Buttons on Proprietary Telephones
DescriptionProprietary telephones are provided with the feature / line access
buttons listed below:
KX-T Proprietary Telephones:
CONF tI (/
FLASHI (f
t
Function
FWD/DNDtI d
7030
4
d&
-A-
L
r/
d (4)
r/
ISHIFT tI7050 7055 7130 7220
r/ (/
(/d! (/ (/
d(12) d(3) s/(12) c/(24;
(/! (/! d d
d d (/ c/d(4) I d(3) 
jd(12)j7250 
1
(/ : The button is provided on the designated telephones.
t: The button is provided with an LED (Light Emitting Diode).
*: The buttons which can be changed to function as a feature button are called flexible buttons.
!: The button is provided without an LED.
(x) : Shows the number of buttons only if multiple buttons are provided.
The functions of the listed buttons are described below:
AUTO ANSWER / MUTE: This dual function button is used for
extension auto-answer and microphone mute during a conversation.
AUTO DIAL / STORE: Used for System Speed Dialing and
storing program changes.
CO (Central Offke line): Can make or receive an outside call or
can be re-assigned to a different CO or to various feature buttons.
CONF (Conference): Used to establish a three-party conference.
FLASH: Allows you to disconnect the current call and originate
another call without hanging up (Flash).Sends a flash signal to the
3-22Features 
						

							FeaturesBConditionsCentral Office or host PBX to access their features (External
Feature Access).
Function: Used to perform the displayed function 
/ operation.
FWD / DND (Call Forwarding / Do Not Disturb): Used toprogram Call Forwarding, set Do Not Disturb.
HOLD: Used to place a call on hold.
INTERCOM: Used to make or receive intercom calls.MESSAGE: Used to send a message or display current message.
MONITOR: Used for a handsfree operation.PAUSE: Inserts a pause in a speed dial number. With an analog
proprietary telephone, it is used as the PROGRAM button.
PF (Programmable Feature): This flexible button can be programmed
to be a One-Touch Dialing, FWD / DND, SAVE, Account, CONF
(Conference) or Voice Mail Transfer button, as desired.
PROGRAM: Used to enter / exit the Programming mode. With the
XX-T7220 and RX-T7250, it can also be used as the PAUSE button.REDIAL: Used for Last Number or Automatic Redial.
SAVE: Used to store a dialed telephone number for Saved Number
Redial.SHIFT: Used to access the second level of Soft button function.
Soft: Pressing a Soft button performs the function 
/ operation
appearing on the bottom line of the display.
SP-PHONE (Speakerphone): Used for a handsfree operation.Pressing the button causes the telephone to switch between handset
and handsfree operation.
TRANSFER: Transfers a call to another extension or external
destination.
VOLUME: Used to adjust the ringer, speaker, handset and headsetvolume and the display contrast.
l Certain buttons are equipped with light indicators (LED’s) to show
line or feature status.
l CO buttons can be classified according to the following three types:
Single-CO (S-CO) button 
/ Loop-CO (L- CO) button
Programming References
Section 4, System Programming
[OOS] Flexible CO Button Assignment
Station Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .User Manual
Flexible CO Button Assignment
Feature ReferencesNone
Operation ReferencesRefer to respective operating instructions.-User Manual
Features
3-23 
						

							CCaller ID
DescriptionProvides the display proprietary telephone user with a caller’s
information, such as his 
/ her name and telephone number, on the
outside line assigned to receive Caller ID service calls.
Additionally, a special standard telephone, which has a Caller ID
feature, can receive the Caller ID service from the Central Office
and display the caller’s information (Internal Caller ID).
Conditionsl Up to 100 Caller ID entry numbers can be stored in a table called
“Caller ID Table” in the system. Each entry can consist of a caller’s
telephone number and name.
l If neither the telephone number nor the name is stored in the Caller ID
Table, the number sent from Caller ID service is displayed.
l If the network provides a single message, the system searches for the
name 
from the number in the Caller ID Table and displays both of them.
l It is required to assign the outside lines which a Caller ID service is
offered by a Central Office.
l It is required to assign the extension to have the Internal Caller ID
service.
l The display DPT (KX-T7230 or KX-T7235) user can record the
information of the call received by Caller ID (Call Log, Incoming
feature).
l An analog proprietary telephone will show either the name or the
number. To alternate the display, press the * key.
l If an outside line name is assigned, the user can select the initial
display, Caller ID, or outside line name by Station Programming.
l An optional Caller ID / DISA / FAX Detection Card must be installed
for the system.
l If a standard telephone with a Caller ID feature is connected in parallel,
the Caller ID feature will not function.
Connection References
Section 2, Installation
2.4.2 4-SLT Extension Expansion Card / Caller ID/DISA/FAX Detection
Card Installation
Programming References
Section 4, System Programming
[ 1 lo]Caller ID Code Set
[ 11 
l] Caller ID Name Set
[ 1251 Area Code Assignment
[ 1261Caller ID Modification for Local Call
[ 1271Caller ID Modification for Long Distance Call
3-24Features 
						

							3FeaturesC
[ 1281 Internal Caller ID Extension Assignment
[406] Caller ID Assignment
[417] Outside Line Name Assignment
[990] System Additional Information, Field (30)
Station Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .User Manual
Initial Display Selection
Feature ReferencesSection 3, Features
Call Log, IncomingOperation References DPT Features
-User Manual
Call Information/Log, Incoming
Call Log, IncomingFeatures
3-25 
						

							C3Features
CALL FORWARDING FEATURES - SUMMARY
DescriptionCall forwarding features enable you to have your calls forwarded to
a specified destination. You may specify the circumstances under
which your calls are forwarded. The following Call Forwarding
features are available:
Call Forwarding 
- All Calls
Call Forwarding 
- Busy
Call Forwarding 
- Busy / No Answer
Call Forwarding - Follow MeCall Forwarding 
- No Answer
Call Forwarding 
- to Outside Line
C~II Forwarding - All Calls
DescriptionThis feature is used when you want all your calls to be
automatically r-e-directed to another extension.
Conditions0’ Types of calls which are forwarded by this feature are:
Outside calls 
- DIL 1: 1; DISA; Intercept Routing
Intercom calls - Extension; Transfer
l There can only be one stage of Call Forwarding, if a call is forwarded to
an extension which is also in Call Forwarding. In this case, Station
Hunting can be activated for the forwarded call.
l Although calls are forwarded, Message Waiting is not. The MESSAGE
button indicator is lit on the originally called extension.
l If an extension in Call Forwarding is also in a Hunt group, a call
directed to the extension is forwarded. Station Hunting still applies for
calls directed to other extensions in the Hunt group.
l Both the Call Forwarding and DND functions can be set at the same
time, but cannot work at the same time.
l Pressing the FWD/DND button while on-hook allows the user to enable
or disable the Call Forwarding or DND function.If the user sets both
functions, alternating the mode is also available by pressing the
FWD/DND button.
l A Floating Station cannot be programmed as the forwarded destination.
Programming References
Section 4, System Programming
[O&5] Flexible CO Button Assignment
[ 1001Flexible Numbering, Call forwarding / do not disturb
StationProgramming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UserManual
Flexible CO Button Assignment 
- FWD/DND Button
3-26Features 
						

							FeaturesC
Feature ReferencesNoneoperation References
DPT Features, Standard Telephone Features-User Manual
Call Forwarding - All Calls
Call Forwarding - Busy
DescriptionA call directed to your extension is forwarded to another extension
if your telephone is busy.
Conditionsl Types of calls which are forwarded by this feature are:
Outside calls 
- DIL 1: 1; DISA; Intercept Routing
Intercom calls 
- Extension; Transfer
l There can only be one stage of Call Forwarding, if a call is forwarded to
a station which is also in Call Forwarding. In this case, Station Hunting
is activated for the forwarded call.
l Although calls are forwarded, Message Waiting is not. The MESSAGE
button indicator is lit on the originally called extension.
l If an extension in Call Forwarding is also in a Hunt group, a call
directed to the extension is forwarded. Station Hunting still applies for
calls directed to other extensions in the Hunt group.
l Both the Call Forwarding and DND functions can be set at the same
time, but cannot work at the same time.
l Pressing the FWD/DND button while on-hook allows the user to enable
or disable the Call Forwarding or DND function.If the user sets both
functions, alternating the mode is also available by pressing the
FWDLDND button.
l A Floating Station cannot be programmed as the forwarded destination.
Programming References
Section 4, System Programming
[005] Flexible CO Button Assignment
[ 
1001 Flexible Numbering, Call forwarding / do not disturb
StationProgramming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UserManual
Flexible CO Button Assignment 
- FWD/DND Button
Feature ReferencesNone
Operation ReferencesDPT Features, Standard Telephone Features-User Manual
Call Forwarding - Busy
Features3-27 
						

							CFeatures
Call Forwarding - Busy / No Answer
DescriptionYour calls are forwarded to another extension if your extension is
busy or you do not answer the call within a pre-determined time.
Conditionsl Types of calls which are forwarded by this function are:
Outside calls 
- DIL 1: 1; DISA; Intercept Routing
Intercom calls 
- Extension; Transfer
l This function operates the same way as Call Forwarding - Busy and
Call Forwarding 
- No Answer.
l There can only be one stage of Call Forwarding if a call is forwarded to
a station which is also in Call Forwarding. In this case, Station Hunting
is activated for the forwarded call.
l Although calls are forwarded, Message Waiting is not. The MESSAGE
button indicator is lit on the originally called extension.
l If an extension in Call Forwarding is also in a Hunt group, a call
directed to the extension is forwarded. Station Hunting still applies for
calls directed to other extensions in the Hunt group.
.
l Both the Call Forwarding and DND functions can be set at the same
time, but cannot work at the same time.
l Pressing the FWD/DND button while on-hook allows the user to enable
or disable the Call Forwarding or DND function. If the user sets both
functions, alternating the mode is also available by pressing the
FWD/DND button.
l A Floating Station cannot be programmed as the forwarded destination.
Programming References
Section 4, System Programming
[005] Flexible CO Button Assignment
[ 1001Flexible Numbering, Call forwarding / do not disturb
[202] Call Forwarding - No Answer Time
Station Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .User Manual
Flexible CO Button Assignment 
- FWD/DND Button
Feature ReferencesSection 3, Features
Call Forwarding - BusyCall Forwarding - No Answer
Operation ReferencesDPT Features, Standard Telephone Features-User Manual
Call Forwarding - Busy / No Answer
3-28Features 
						

							3Featuresc
Call Forwarding - Follow Me
DescriptionIf you forget to set Call Forwarding - All Calls before you leave
your desk, this allows you to set the same function from thedestination extension.
Conditibnsl Same as the conditions of Call Forwarding - All Calls.
l It is programmable to enable or disable this feature on Class of Service
basis.
Programming References
Section 4, System Programming
[005] Flexible CO Button Assignment
[ 1001 Flexible Numbering, Call forwarding / do not disturb
[991] COS Additional Information, Field (2)
StationProgramming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . User Manual
Flexible CO Button Assignment - FWD / DND Button
Feature ReferencesSection 3, Features
Call Forwarding - All Calls
Operation ReferencesDPT Features, Standard Telephone Features-User Manual
Call Forwarding - Follow Me
Call Forwarding - No Answer
DescriptionCalls to your extension are forwarded to another extension if you
do not answer the call in a pre-determined time.
Conditions. Types of calls which are forwarded by this function are:
Outside calls 
- DIL 1: 1; DISA; Intercept Routing
Intercom calls 
- Extension; Transfer
l This function operates if an incoming call is not answered in a specific
period of time. Therefore, this function also applies if your extension is
busy and cannot answer the incoming call within the time.
. There can only be one stage of Call Forwarding if a call is forwarded to
a station which is also in Call Forwarding. In this case, Station Hunting
is activated for the forwarded call.
l Although calls are forwarded, Message Waiting is not. The MESSAGE
button indicator is lit on the originally called extension.
l If an extension in Call Forwarding is also in a Hunt group, a call
directed to the extension is forwarded. Station Hunting still applies for
calls directed to other extensions in the Hunt group.
Features3-29 
						

							3Features
. Both the Call Forwarding and DND functions can be set at the same
time, but cannot work at the same time.
l Pressing the FWD/DND button while on-hook allows the user to enable
or disable the Call Forwarding or DND function.If the user sets both
functions, alternating the mode is also available by pressing the
FWD/DND button.
l A Floating Station cannot be programmed as the forwarded destination.
Programming References
Section 4, System Programming _
[005] Flexible CO Button Assignment
[ 1001 Flexible Numbering, Call forwarding / do not disturb
[202] Call Forwarding - No Answer Time
StationProgramming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UserManual
Flexible CO Button Assignment 
- FWD/DND Button
Feature ReferencesNone
Operation ReferencesDPT Features, Standard Telephone Features-User Manual
Call Forwarding - No Answer
Call Forwarding - to Outside Line
DescriptionCalls directed to your extension will be sent to an external
destination. The outside telephone number must be pre-
programmed.
Conditionsl Types of calls which are forwarded by this function are:
Outside calls 
- DIL 1: 1; DISA
Intercom calls 
- Extension; Transfer
l The forwarding extension’s Toll Restriction, Automatic Route Selection
(ARS) and Account Code Entry requirements still apply.
l Although calls are forwarded, Message Waiting is not. The MESSAGE
button indicator is lit on the originally called extension.
l If an extension in Call Forwarding is also in a Hunt group a call
directed to the extension is forwarded. Station Hunting still applies for
calls directed to other extensions in the Hunt group.
l Both the Call Forwarding and DND functions can be set at the same
time, but cannot work at the same time.
l Pressing the FWDLDND button while on-hook allows the user to enable
or disable the Call Forwarding or DND function. If the user sets both
functions, alternating the mode is also available by pressing the
FWD/DND button.3-30Features