Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

							3Featuresc
Call Pickup, Directed
DescriptionAllows an extension user to answer a call ringing at any other
extension.
Conditiqns. Doorphone calls can be picked up from extensions that are not
programmed to answer doorphone calls.
l A confirmation tone is sent to the user when the call is picked up.
Eliminating the tone is programmable.
l You can pick up a call by pressing a flashing DSS button assigned on a
proprietary telephone.
Programming References
Section 4, System Programming
[ 1001 Flexible Numbering, Call pickup, directed
[990] System Additional Information, Field (16)
Feature ReferencesNone
Operation ReferencesDPT Features, Standard Telephone Features-User Manual
Call Pickup, Directed
Call Pickup, Group
DescriptionAllows an extension user to answer a call that is ringing at another
telephone, if 
the call is ringing within the user’s extension group.
Conditionsl The user can pick up an incoming outside, intercom, or doorphone call.
l The priority of Group Call Pickup is as follows:
Outside call 
> Transferred call > Extension call > Doorphone call
. Group Call Pickup starts with the lowest jack number.
l A confirmation tone is sent to the user when the call is picked up.
Eliminating the tone is programmable.
Programming References
Section 4, System Programming
[ 1001 Flexible Numbering, Call pickup, group
[990] System Additional Information, Field (16)Feature References None
Operation ReferencesDPT Features, Standard Telephone Features-User Manual
Call Pickup, GroupFeatures
3-41 
						

							3Features
Call Pickup, Outside Line
DescriptionAllows an extension user to answer an incoming outside call that is
ringing at another telephone.
Conditionsl Call Pickup starts with the lowest CO number.
l A confirmation tone is sent to the user when the call is picked up.
Eliminating the tone is programmable.
Programming References
Section 4, System Programming
[ 1001 Flexible Numbering, Call pickup, outside line
[990] System Additional Information, Field (16)
Feature ReferencesNone
Operation ReferencesDPT Features, Standard Telephone Features-User Manual
Call Pickup, Outside Line
Call Pickup Deny
DescriptionAllows the user to prevent other extensions from picking up calls
ringing at his 
/ her extension by using the call pickup features.
ConditionsDistinctive Dial Tone is sent to the user on the extension with this feature
when the user goes off-hook.
Programming References
Section 4, System Programming
[ 1001 Flexible Numbering, Call pickup deny
Feature ReferencesSection 3, Features,
Call Pickup, Directed
Call Pickup, CroupCall Pickup, Outside Line
Operation ReferencesDPT Features, Standard Telephone Features-User Manual
Call Pickup Deny
3-42Features 
						

							Featuresc
Call Splitting
DescriptionAllows the extension user to alternate between two other parties.
Placing the current call on hold allows the user to have a
conversation with the other party.
ConditionsCall Splitting is impossible during Doorphone Call or Paging.
Programming References
No programming required.
Feature ReferencesNone
Operation ReferencesDPT Features, Standard Telephone Features-User Manual
Call SplittingFeatures
3-43 
						

							cFeatures
CALL TRANSFER FEATURES - SUMMARY
DescriptionCall Transfer features allow the user to transfer a call to another
party. This operation can be screened or unscreened. Screened call
transfer is used when you want to announce 
the call to the other
party before completing the transfer. Unscreened call transfer
immediately releases the caller to the called party. An intercom or
an outside call can be transferred to an extension or to an outside
Party by:
Call ‘Ikansfer, Screened - to Extension
Call Transfer, Screened 
- to Outside LineCall 
‘Ikansfer, Unscreened - to Extension
Call Transfer, Screened - to Extension
DescriptionAllows the extension user to voice-announce to the extension and
transfer the call.Conditions
The destination extension must have a CO button which is common to the
outside line in use by the transferring party.
Programming References
Section 4, System Programming
[990] System Additional Information, Field (1)
Feature ReferencesNone
Operation ReferenceDPT Features, Standard Telephone Features-User Manual
Call Transfer - to Extension
3-44Features 
						

							Featuresc
Cal Transfer, Screened - to Outside Line
DescriptionAllows the proprietary telephone user to voice-announce to the
external party and transfer the call.
Conditiqnsl Class of Service programming determines the extensions that are able to
perform this.
l If a call between two external parties is established by this feature, the
duration of the call period is restricted by a system timer. Hold Recall
is generated to the extension who transferred the call 50 seconds before
the time-out. Also Hold Alarm tone is generated to both outside parties
15 seconds before the time-out. The call is disconnected at the time-out
unless the extension restores the conference.
Programming References
Feature References
Section 3, Features
Hold Recall
Operation ReferenceDPT Features, Standard Telephone Features-User Manual
Call Transfer - to Outside Line
Section 4, System Programming
[205] Extension-to-Outside Line Call Duration Time
[206] Outside-to-Outside Line Call Duration Time
[502] Extension-to-Outside Line Call Duration Limit
[503] Call Transfer to Outside Line
[990] System Additional Information, Field (1)
Features3-45 
						

							CFeatures
Cal Transfer, Unscreened - to Extension
DescriptionAllows the user to transfer an intercom or outside call directly to an
extension party. After dialing the destination extension, the user
replaces the handset while listening for the 
ringback tone.
Conditionsl If the destination party does not answer within the transfer recall time,
the call will return to the user or Operator 1.You can select either one
by system programming.
l This function is possible when the destination is sending ringback or
busy tone. If the destination is busy, Camp-On Transfer occurs.
l The ringing signal pattern follows the regular ringing pattern depending
on the party being transferred: outside or extension call ringing.
l If music on hold is enabled, music is sent to the caller while being
transferred. It is system-programmable whether to send ringback tone
or music on hold to the caller by program [990], Field ( 1).
l The destination extension must have a CO button which is common to
the outside line in use by the transferring party.
Programming References
Section 4, System Programming
[201] Transfer Recall Time
[990] System Additional Information, Fields (1 ), (11)
Feature ReferencesNone
Operation ReferencesDPT Features, Standard Telephone Features-User Manual
Call Transfer - to Extension3-46Features 
						

							FeaturesC
Call Waiting
DescriptionDuring a conversation, a call waiting tone informs the user of
another incoming call that is waiting. He or she can answer the
second call by disconnecting or placing the current call on hold.
Call waiting tone can be activated or deactivated by dialing the
appropriate feature number.
Conditions
Tone 1
l Tbe call waiting tone is generated when an outside call (except a DISA
call or doorphone call) is received, or when an extension caller executes
Busy Station Signaling.
l Setting Data Line Security temporarily cancels Call Waiting which has
been turned on by an extension user.
l For proprietary telephone users, two types of call waiting tone are
provided to prevent them from missing the tone as shown below:
A proprietary telephone user can select the desired type by Station
Programming.
Tone 2
Outside
Intercom
Programming References
Section 4, System Programming
[ 1001 Flexible Numbering, Call waiting set / cancel
StationProgramming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UserManual
Call Waiting Tone Type Assignment
Feature ReferencesSection 3, Features
Busy Station Signaling (BSS)
Operation ReferencesDPT Features, Standard Telephone Features-User Manual
Call WaitingFeatures
3-47 
						

							c3FeaturesI ‘.
Call Waiting from Central Office
DescriptionDuring a conversation, a call waiting tone offered by your Central
Offke informs the user of another incoming call that is waiting. He
or she can answer the second call by placing the current call on
hold.
ConditionsNone
Programming References
No programming required.
Feature ReferencesNone
Operation ReferencesDPT Features, Standard Telephone Features-User Manual
Call Waiting from Central Office
3-48Features 
						

							Featuresc
Class of Service (COS)
DescriptionCOS is used to define the features which are allowed for a group ofextensions. Each extension is assigned a COS number. Eight
Classes of Service are available.
Conditionsl The programmable items are shown below:
(1)Forwards a call to an outside party
(2)Transfers a call to an outside party
(3)Overrides Do Not Disturb of the called extension
(4)Account Code Entry operation - verified - all calls / verified -
toll restriction override / option
(5) Executive Busy Override
(6) Executive Busy Override Deny
(7)Outgoing call restriction level (Day mode / Night mode) - 1
through 8
(8)Restriction of outside call duration
(9)The number of permitted dialing digits during an outside call
(10) Call Forwarding 
- Follow Me
l The extension user can use all of the COS functions of their own
extension at another extension by entering a working COS password
(Walking COS) .
Programming References
Section 4, System Programming
[500]-[501] Toll Restriction Level - Day / Night
[502] Extension-to-Outside Line Call Duration Limit
[503] Call Transfer to Outside Line
[504] Call Forwarding to Outside Line
[505] Executive Busy Override
[506] Executive Busy Override Deny
[507] Do Not Disturb Override
[508] Account Code Entry Mode
[601] Class of Service
[991] COS Additional Information
Feature ReferencesSection 3, Features
Walking COS
Operation References Not applicable.
Features3-49 
						

							c3.FeaturesConference
DescriptionThe system supports three-party conference calls, including outside
or inside parties. During a two-party conversation, the extension
user can add a third party to their conversation, thereby establishing
a conference.
Conditionsl Possible conference combinations are: l-inside and 2-outside; 2-inside
and l-outside; and 3-inside.
l Up to six conference calls are allowed simultaneously.
l A three-party call is also established by Executive Busy Override or
Privacy Release.
l When a two-party call is changed to a three-party call or vice versa, a
confirmation tone is sent to all three parties.Eliminating the tone is
programmable.
l The third party must have a CO button which is common to the outside
line used by the original parties.
Programming References
Section 4, System Programming
[005] Flexible CO Button Assignment
[990] System Additional Information, Field (13)
Station Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .User Manual
Flexible CO Button Assignment 
- Conference (CONF) Button
Feature ReferencesSection 3, Features
Conference, Unattended
Operation ReferencesDPT Features, Standard Telephone Features-User Manual
Conference3-50Features