Panasonic Kx-Td308 Digital Super Hybrid System Installation Maintenence Manual

							314-321 4~TRS / ARS Programming
ARS Leading Digit Entry for Pkzns 1 through 8 (contd)
ConditionsEach number has a maximum of ten digits, consisting of 0 through 9, and
* .The character “X ” can be used as a wild card character (i.e., “do not
care” digit). The system scans all the ARS Leading Digit Plans
simultaneously from left to right. The scan ends as soon as the dialed
number matches a table entry. When using a wild card character, it is
important to use one in each digit position that must be scanned.
For
example, to differentiate local and long distance calls with the same
leading digits: Plan 1) l- * X * ; Plan 2) 1-215. Note that three wild
card digits were used to ensure that the system scanned the first four
digits. A shorter string of 
“ * “s would send all the calls to the Plan 1
carrier.
Feature ReferencesSection 3, Features
Automatic Route Selection (ARS)
4-86System Programming 
						

							45aTRS / ARS Programming322-329
ARS Routing Plans 1 through 8
Description
Selection
Default
All time schedules - Not stored
Programming1.Enter a program address (322 through 329).
Display example: 322 ARS ROUTE 1
Assigns the outside line and modification plan to be used for
each route plan and time schedule.Program: 
13221 [323] [324] [325] [326] [327] [328] [329]
Plan:1 2 3 4 5 6 7 8
l Time schedule: A / B / C / D
l Outside line number: 1 through 3
l Modification table number: 1 through 8
2.
3.Press NEXT to program time schedule A.
To program another time schedule, keep pressing NEXT or PREV
until the desired time schedule is displayed.Display example: A:C M
,C M,C M
Enter an outside line number.
To delete the current entry, press CLEAR.
To change the current entry, enter the new number.
4.Press W to enter the paired modification table number.
5.Enter a modification table number.
To delete the current entry, press CLEAR.
To change the current entry, enter the new modification table number.
6.
7.Press W to enter the next priority outside line number.
Repeat steps 3 through 6 to enter other outside line numbers
and modification table numbers.
8.
9.
10.li.
Press STORE.
To program another time schedule, keep pressing NEXT or
PREV until the desired time schedule is displayed.
Repeat steps 3 through 9.
Press END.
System Programming
.
4-87 
						

							322-329 4~TRS / ARS Programming
ARS Routing Plans 1 through 8 (contd.)
Conditionsl Up to three outside lines and modification plans can be assigned for
each time schedule. The outside line number and modification table
number must be entered together. The highest priority outside line
number and modification table number is entered first (left to right).
l Programs [330] “ARS Modify Removed Digit” and [331] “ARS
Modify Added Number” are used to make up the eight Modification
Tables.
Feature ReferencesSection 3, Features
Automatic Route Selection (ARS)
4-88System Programming
. 
						

							450TRS / ARS Programming330
ARS Modifj Removed Digit
DescriptionDetermines how the dialed number should be modified before
transmitting to the central 
offke. You can delete the digits from the
beginning of the dialed number.
Selectionl Modification table number: 1 through 8
l Number of digits to be deleted: 0 through 9 (O=no deletion)
DefaultAll modification tables - 0
Programming1.
2.
3.
4.
Enter the number of digits to be deleted.
5.
To change the current entry, enter the new number.
Press STORE.
6.To program another modification table, press NEXT or
PREV, or SELECT and the desired modification tablenumber.
7.
8.
Enter 330.
Display: 330 ARS REMOVE
Press NEXT.Display: Modify Table?+
Enter a modification table number.
To enter table number 1, you can also press NEXT.Display example: 
1:O
Repeat steps 4 through 6.
Press END.
Conditionsl There is a maximum of eight Modification Tables:’ You can only delete
1 digit of a number in each table.
Feature ReferencesSection 3, Features
Automatic Route Selection (ARS)
System Programming
.
4-89 
						

							331450TRS / ARS Programming
ARS Mod@ Added Number-.,
DescriptionDetermines how the dialed number should be modified before
transmitting to the central 
office. Assigned numbers are added to
the beginning of the dialed number.
Selectionl Modification table number: 1 through 8
l Number to be added: 20 digits (max.)
DefaultAll modification tables - Not stored
Programming1.Enter 331.
Display: 331 AFLS ADD #S
2.Press NEXT.
Display: Modify Table?+
3.Enter a modification table number.
To enter table number 1, you can also press NEXT.
Display example: 1:
4.Enter the number to be added.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
5.Press STORE.
6.To program another modification table, press NEXT or
PREV, or SELECT and the desired modification table
number.
7.Repeat steps 4 through 6.
8.Press END.
Conditionsl There is a maximum of eight Modification Tables, each of which can be
given a number to be added.
l Each number has a maximum of 20 digits, consisting of 0 through 9,
* , #, and PAUSE.
Feature ReferencesSection 3, Features
Automatic Route Selection (ARS)
4-90System Programming
. 
						

							450TRS / ARS Programming332
Extra Entry Table Selection
,’
DescriptionSelects the code table which enables an extra 400 entries within
Denied or Except Code Table.
Selection. Deny / Exceptl Level number: 2 through 6
Default,Except - 2
Programming1.
2.
3.
4.Press W to enter a level number.
5.Enter a level number.
6.
7.Enter 332.
Display: 332 TRS EXTRA +
Press NEXT.
Display example: Table:Except-2Keep pressing SELECT until the desired selection is
displayed.
Display‘ example: Table:Except-3
Press STORE.
Press END.
Conditionsl There is a maximum of either 120 toll call numbers for Denied Code
Table or a maximum of 105 toll call numbers for Excepted Code Table.
Feature ReferencesSection 3, Features
Toll RestrictionSystem Programming
4-91 
* 
						

							333450TRS / ARS Programming
TRS Entry Code Assignment.for Extra Table
DescriptionThis program allows you to specify the numbers for extra Denied
or Excepted Code Table for expansion.
Selectionl Location number: 001 through 100
l Toll call number: 10 digits (max.)Default
All locations - Not stored
Programming1.
2.
3.
4.
5.
‘6.
7.
8.
Conditions
Enter 333.
Display: 333 TRS EXTRA -
Press NEXT.
Display: Location NO?+
Enter a location number.
To enter location number 001, you can also press NEXT.
Display example: OO1:Not Stored
Enter a toll call number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.Press STORE.
To program another location number, press NEXT or PREV,
or SELECT and the desired location number.
Repeat steps 4 through 6.
Press END.
l There is a maximum of either 120 toll call numbers for Denied Code
Table or a maximum of 105 toll call numbers for Excepted Code Table.
Each number has a maximum of ten digits, consisting of 
0 through 9,and 
* .The character “ * ” can be used as a wild card character.
Feature ReferencesSection 3, Features
Toll Restriction
4-92System Programming
. 
						

							45lTRS / ARS Programming334
Emergency Dial Number Set
DescriptionStores up to ten emergency call numbers.
Emergency numbers are not subject to toll restriction, Account
Code 
- Verified mode or Electronic Station Lockout.
Selectionl Location number: 01 through 10
l Emergency number: 7 digits (max.)
DefaultLocation 01 = 911, Other location = Not stored
Programming1.
2.
3.
4.
5.
6.
7.Repeat steps 4 through 6.
8.Press END.
Enter 334.
Display: 334 EMERGENCY #
Press NEXT.
Display: Location NO?+
Enter a location number.
To enter location number 01, you can also press NEXT.
Display example: 01:911
Enter an emergency number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number.
Press STORE.
To program another location, press NEXT or PREV, or
SELECT and the desired location number.
Conditionsl Each emergency number has a maximum of seven digits, consisting of
0 
tlu-ollgb 9.Feature References
section 3, Features
Automatic Route Selection (ARS)
Toll Restriction
System Programming4-93 * 
						

							400 46Outside Line Programming
Outside Line Connection Assignment
DescriptionUsed to identify the outside lines which are connected to the
system. This prevents users from originating a call to a line which
is not connected.
Selectionl Outside line (CO) number: 1 through 3, * ( * =all outside lines)
l Connect / No Connect
DefaultAll outside lines - Connect
Programming1.
2.
Enter 400.
Display: 400 CO CONNECT
Press NEXT.
Display: CO Line NO?+
3.Enter an outside line number.
4.
5.
6.
7.
8.
To enter &side line number 1, you can also press NEXT.
Display example: CO1:Connect
Keep pressing SELECT until the desired selection is
displayed. 
-
Press STORE.
To program another outside line, press NEXT or PREV, or
SELECT and the desired outside line number.
Repeat steps 4 through 6.
Press END.
Conditionsl To assign all outside lines to one selection, press the * key in step 3.
In this case, the display shows the contents programmed for outside line
1.Feature References
Section 3, Features
Outside Line Connection Assignment
4-94System Programming
. 
						

							46lOutside Line Programming402
Dial Mode Selection
DescriptionEach outside line can be programmed for DTMF, p.ulse (rotary) or
call blocking. This program assigns your choice to each line.
DTMF: The dialing signals from an extension, either tone or pulse, are
converted to tone signals and transmitted to the outside line.
Pulse: The dialing signals from an extension, either tone or pulse, are
converted to pulse signals and transmitted to the outside line.
Call blocking: If your central office can receive both DTMF and pulse signals but
you are contracted for pulse, select this mode. When dialing on the
line with a touch tone telephone, only the pulse signals are sent to
the outside line.
Selectionl Outside line (CO) number: 1 through 3, * (X =all outside lines)
l DTMF / Pulse / C. Block (call blocking)
DefaultAll outside lines - DTMF
Programming1.
2.
3.
4.
5.
6.
7.
8.
Enter 402.
Display: 402 DIAL MODE
Press NEXT.
Display: CO Line NO?+
Enter an outside line number.
To enter outside line number 1, you can also press NEXT.
Display example: CO1:DTMF
Keep pressing SELECT until the desired selection is
displayed.
Press STORE.
To program another outside line, press NEXT or PREV, or
SELECT and the desired outside line number.
Repeat steps 4 through 6.
Press END.
System Programming4-95 -